Worlds First 250cc Mini Quad

[@derrickran_yt9395]

im the 1k sub

[@kikiscustoms]

Yoooooooooo!! I literally just watched you sub to the channel and flip that 1k switch on! Thank you my guy I hope you enjoy my videos. Send me your insta I gotta send you a shirt when I get some made, just gotta find the right designs for em.

[@villesoinine9634]

Imagine if the carb was adjusted how powerful it would have been

[@kikiscustoms]

You’re right, we did adjust the carb, now it’s really fast

[@hondaep3813]

Needs the back muffler to get on the pipe.

[@alexgear9372]

This channel is gonna be something big I already know it. Keep it up man

[@kikiscustoms]

Thank you for believing 🙏

[@sym6oI]

yup was in my recommendations

[@derek_underwood]

I've seen a few 250r motors shoved in a trx90. Sheesh That cylinder was F'd! What did u do about those grooves?

[@kikiscustoms]

Just sent it hahah

[@derek_underwood]

@@kikiscustoms lmao you're insane! 😆🤘

[@josuemurillocalvo4511]

That sound like don’t need that much gas u should jetting the carb because that’s not all the potencial of the motor

[@kikiscustoms]

it was actually lean, but we tuned it and now its dangerous

[@sym6oI]

editing you did at the end was fantastic, made it look like a blast hanging out with your friends riding that thing. Loved it

[@kikiscustoms]

Oh it was fun. I’m glad you enjoyed the editing !

[@sym6oI]

@@kikiscustoms and im back to watch this again

[@michaelosullivan8119]

Your crazy come up with a 250 and what frame you guys using ? Keep it up with maddest build dont give up as there are plenty people will pay you for the build of ideas of mini quads

[@kikiscustoms]

It’s a cheap Chinese Falcon 110 frame that had a 110 4 stroke in it.

[@Roberge-ln1zy]

How’d you learn to rebuild the engine? Just curious

[@kenngobrap7077]

2 stroke are more simpler than u think

[@kikiscustoms]

They’re really simple. It’s all about getting one and taking it apart. Best way to learn

[@Roberge-ln1zy]

@@kikiscustoms thanks well guess that means I need to blow an engine up 👍

[@captainaxan4967]

Omg I used to own a kazuma falcon 110 and I always wanted to put a Honda 250r engine in it and I searched it up on KZbin and there was no results and now I can finally see how fast it would’ve been if I swapped a 250r engine in it

[@kikiscustoms]

It’s honestly too fast to ride, but so fun 😂

[@captainaxan4967]

@@kikiscustoms nice I flipped it over once because it was so narrow haha might wanna get it widened up a little bit so then it’s safer

[@Kyle_gallegher]

Tht motor needs crank seals while your at it its pretty easy and change the reeds the bottom end lasts forever on these like a blaster I've never seen one of them go

[@kikiscustoms]

I like to run my engines dry, less resistance from oil you know. 😉

[@Kyle_gallegher]

@@kikiscustoms Well if u change your mind its a simple fix.

[@trinidyjohnson9295]

@@kikiscustoms yeah that drag on the crank can kill horse power.....throw a stick of butter in the crank case and call it good!

[@rigocastro8067]

This has to be one of the craziest builds I've seen, with some wider tires in back I think it would be track ready lol. Awso.e build bro.

[@kikiscustoms]

Right on. Thats what I gotta do. Wide axel in the back, stretch the frame and rip it hahha

[@Theofficialdylanstidmon]

I could tell when u first started it all the smoke looked like something wasnt right.

[@kikiscustoms]

Yea past owner didn’t know how to fix it haha

[@josephscotson1065]

Got any other videos on how you wired the rm 250 to the Chinese wiring ?

[@xmayyham]

I mean Yamaha blasters exist but good job

[@kikiscustoms]

True, but who doesn’t love a mini quad that wobbles at 40 mph 😂

[@xmayyham]

@@kikiscustoms yeah😭

[@AnDrEw122100]

Keep it up young feller this channel will go places , persistency is key . I love fun little builds like this lol.

[@kikiscustoms]

Thank you for the support my guy!!

[@lightemuppowersports9485]

Not the first I built one using lt80 and an lt250r last year. Cool build tho

[@kikiscustoms]

I checked your videos out man. Gotta post more I like what you’re doing!

[@choke666]

LOL BRO, YOU'RE A NATURAL AT THIS. AWESOME JOB!

[@kikiscustoms]

Haha thank you. I’m workin hard for it!

[@kenngobrap7077]

Niceee, fix the carb though its running a bit rich

[@kikiscustoms]

It was lean, but we got it fixed. Now it’s dangerous...

[@dgmenace73]

I appreciate your knowledge and mechanical skills.....You are definitely young & bright on to a great start. You give good advice and your video skills are great as well. Your channel will be rocking for sure if you keep it going!! Good luck and nice mini 250!!! By the way, what engine was that???

[@kikiscustoms]

I appreciate that! it came out of a 1985 lt250r suzuki. got it for $200!

[@dgmenace73]

@@kikiscustoms awesome!

[@seanfairway8846]

Insane the amt of work done here at the end of the day u had a dream and made it real

[@kikiscustoms]

Thank you for appreciating the work!

[@IluvMikel]

May have to jet it should be moving a lot faster than tht. I think it’s running lean but you probably can just clean out the carburetor

[@kikiscustoms]

We actually did jet it, it’s deadly now 🥵

[@jessebrown9046]

it rips bud! did you hone that cylinder before you put in the piston? sick video

[@kikiscustoms]

Nah didn’t bother honing it haha. Just full sent it. Thanks broski!!

[@cxbra]

This is bad ass!! I need to upload my SSR 110 with CR85 swap! (Big bore kit, fresh crank, carbon reeds, ported, hd clutch plates etc). I didnt do the swap I bought the bike like that. Got it for a steal, I could get $2k for the motor alone if sold to some karters.

[@kikiscustoms]

Definitely upload the video! I’ll watch it

[@Bandmanofficial6]

I’m in Los Angeles let’s get a build going

[@kikiscustoms]

I’m down, what do you have in mind?

[@pauleyboy6448]

Could need a carb clean/adjustment or the power valve isnt working properly bc it's not hitting the power band like it shoulda...but great video man for real

[@kikiscustoms]

Yea I think it needs more back pressure since it is missing the silencer

[@pauleyboy6448]

customs yea but definitely check the power valve, carb and spark plug.

[@kollinspencer847]

search up stupid fast john he put a banshee motor in one of these mini quads

[@jtothefx]

Yes! That’s awesome

[@flatout05_41]

I did a 250 4 stroke one last year

[@kikiscustoms]

Should’ve gone with a 2 smoker. Haha does it rip???

[@michaelosullivan8119]

@@kikiscustoms i dare you guys build mini 450 quad be looking bad ass machines to have fun on that I was thinking of that plan cheers then be calling da baby 450

[@Crazytimewins]

My guy can weld yes bro....I take it back 😅

[@kikiscustoms]

😂 boogers

[@brockkincaid4694]

So good at welding

[@VintageSaws]

Damn that's a 85-86 lt250r engine. Had mine for a while now but i for sure dont plan on taking motor off the stock frame. Unless I find a lonestar frame that is 🤟

[@VintageSaws]

Just be sure not to break the chain them case saver bolts tend to brake and ruin the cases.

[@kikiscustoms]

Chain has flown off a couple of times haha, but never snapped, yet...

[@highlightzilla9581]

Sick build

[@nuggetbros994]

What app are u using and great job with the quad

[@kikiscustoms]

its called drag time or something, terrible app tho haha. i suggest buying draggy.

[@KilroyMotorSports]

yall gotta give him a like for this 👍🏻

[@kikiscustoms]

Thanks for the support!

[@njmxjunkie3128]

How much for the engine when your done with it?

[@kikiscustoms]

ill take 5k for it. lol I don't think i'm ready to part with it yet

[@njmxjunkie3128]

@@kikiscustoms $5000???? Lol

[@greenbasterd9112]

Sounds like it's not running right

[@kikiscustoms]

youre right. It wasnt, but we got it tuned

[@jacobboggess5241]

That’s not running right at all the carb needs to be jetted differently cause there’s no silencer and also guessing there’s not I take that will make it do the same if you fix the jetting it’ll haul ass that thing is slow for that motor

[@kikiscustoms]

Yea you’re right. We fixed it. We shouldn’t have. It’s So dangerous now

[@SirDrakeNewcanon]

2:28 I have the same aligment tool as you!

[@kikiscustoms]

It’s one high tech engineering tool I must say…

[@jordansharp2308]

You gained a subscriber my guy!! Badass build keep up the good work!

[@kikiscustoms]

Thanks for the sub! I got more crazy projects coming...

[@zoopinc]

this was so hard to watch fr

[@kikiscustoms]

It doesn’t get easier

[@sillygoosesmallengines1994]

Your content is not worthy if only 200 subs, I subscribed theres something about your that's just great, and your a little caress about something and then very informative when piston rings blew great job

[@kikiscustoms]

Thank you 🙏 #1 fan right here

[@jasonfranklin1514]

Needs jetted but sweet build

[@kikiscustoms]

It did get jetted, and now its too fast

[@trinidyjohnson9295]

Never did sound like it was running right?.

[@kikiscustoms]

It wasn’t, we re jetted the carb and it rips now haha

[@richie8214]

Fairplay mate your good for your age

[@kikiscustoms]

It only gets better from here

[@yungBitta291]

Should have put a 85 motor in it

[@kikiscustoms]

I think a 385cc would be better :)

[@brmcf]

Do you have a front engine mount ?

[@kikiscustoms]

only one for now haha...

[@MultiMoveman]

Not the first but definitely awesome.

[@kikiscustoms]

First 250cc 2 stroke I believe. I haven’t seen any other vids on KZbin of one

[@MultiMoveman]

@@kikiscustoms have you seen the trx70 banshee swap?

[@MultiMoveman]

@@kikiscustoms kzbin.info/www/bejne/f3K9XnWYq6hjgqc

[@298CRE8]

You put that piston in wrong didn't you? It's ok shit happens learn from mistakes which I assume you did? Good fun ✌️💪

[@kikiscustoms]

Yea I put it in upside down. It made the engine run backwards ...

[@298CRE8]

@@kikiscustoms Great joke.......

[@trinidyjohnson9295]

@@kikiscustoms come on everyone knows when you put it in upside down it would obviously make it go in reverse...😆

[@jtothefx]

More details

[@kikiscustoms]

I got you!

[@dollasignjay5882]

Mane extend the swing arm and make it a drift quad

[@kikiscustoms]

oh that sounds fun haha

[@averyanderson6945]

Had to subscribe, video was very well put together

[@kikiscustoms]

Thank you my guy!! You’ll definitely like the videos I’m working on

[@Liske-]

A mini banshee :D

[@switchhitta]

Now you can take it to the car meets and perform a preshow on it lol

[@kikiscustoms]

I’m thinking about it hahah

[@christopherwalker6056]

@@kikiscustoms where did that 250 engine come from?

[@wheelerworld1236]

Once she has a silencer and air filter she will run mintty

[@kikiscustoms]

Straight pipe all the way 😎

[@jsjdhbdbhakbdbh]

12:46 song ?

[@kikiscustoms]

It’s a song I made, I can post it if you want it

[@jsjdhbdbhakbdbh]

Ok

[@graysonsypolt5118]

The carb need adjusted

[@kikiscustoms]

And the carb indeed got adjusted ;)

[@CentuYZ]

PLEASE ALWAYS WARM UP YOUR 2 STROKE ENGINE

[@kikiscustoms]

She was warm before the vid. I could never do that to a 2 smoker ;)

[@CentuYZ]

@@kikiscustoms i hope so I fucking love two stoke and I can't stand to people treating it bad on purpose 😁

[@Chroma_noha]

Engine name? Thanks

[@kikiscustoms]

1985 lt250r ;)

[@lifeononeweel3008]

YOU EARNED A SUB

[@kikiscustoms]

I won’t let you down!!

[@fz1rida953]

That boy looks like parker from the gold rush show.

[@kikiscustoms]

I is him

[@Ggggggggggggg2342]

Thanks for the knowledge

[@kikiscustoms]

I got you!

[@berube361]

In no way is this a mini banshee lol. More like a mini lt250r or mini trx250r lol. Would need a banshee motor to call it a mini banshee. And damn was it not running right.

[@kikiscustoms]

You’re crazy, a banshee motor in this? Better off skydiving with no parachute haha. I know what you’re saying tho, in my eyes it’s a mini banshee

[@YoungBamily]

@@kikiscustoms 😆😆😆

[@justinrichardson693]

Palming the camera is lame. JS

[@kikiscustoms]

Fine, I’ll just stare at it till the vid ends😂

[@Theboys-tn5lf]

no airfilter

[@kikiscustoms]

Yes air filter

[@Kyle_gallegher]

Thats an 86 or 85 lt250r motor. Im kinda mad somebody's killed a real legend just for this pos offbrand mini to get its heart. Those 2 strokes are tanks.

[@kikiscustoms]

Only I kill good quads 😈. Haha nah I bought the motor from someone parting out a lt250r. I dislike the idea of ripping a heart out of perfectly good quad, but the condition of the lt250r was a pos

[@Kyle_gallegher]

@@kikiscustoms I see.. That motor is a simple beast and will take blaster level abuse although its not the most powerful they're reliable im not surprised that engine works and the whole quads clapped. I recently fully rebuilt my lt250r finished yesterday

[@Gertdirt69]

Not the first this has been done many times before

[@kikiscustoms]

I’m curious let me see the swaps you’re talking about

[@Gertdirt69]

@@kikiscustoms kzbin.info/www/bejne/f3K9XnWYq6hjgqc

[@Gertdirt69]

@@kikiscustoms here is one, I’ve seen a ton with Trx250r engines on Facebook

[@Gertdirt69]

@@kikiscustoms kzbin.info/www/bejne/lV7TqWtrjayIiKc

[@kikiscustoms]

I think it’s missing a wheel… haha but fr that thing is sick

[@j-beatsimaginationstudio1987]

lol tires are on backwards

[@kikiscustoms]

That’s so I can get full traction in reverse ;)

[@Leoburket]

It’s not even running right.. bet you never fixed the jug

[@kikiscustoms]

Yea I threw it out. Piece of junk tbh

[@w26delta]

Try to wheelie that beast

[@kikiscustoms]

That’s a job for danger dan

[@zachriebe6080]

Not the first, but cool

[@kikiscustoms]

I guess I gotta make it the first mini drag banshee thing then haha

[@zachriebe6080]

@@kikiscustoms 😳

[@chabmarcoux90]

Fucking nice video

[@kikiscustoms]

haha I'm glad you enjoyed it!

[@ShawnWasBorn2Ride]

Fuckin sick

[@kikiscustoms]

thank you !!!

[@Theofficialdylanstidmon]

Burn the tires off that thing

[@kikiscustoms]

Haha I gotta get it started again and do that haha

[@Theofficialdylanstidmon]

@@kikiscustoms you should totally make a follow up video

[@thicok4555]

Bro thing is t even hitting the pipe

[@kikiscustoms]

uhhh

[@thicok4555]

@@kikiscustoms here I got you !IT RUNS LIKE SHIT! the poor 2 stroke isn’t even getting in powerband

[@kikiscustoms]

My guy 😂 go watch the other video. We tuned it

[@fredrikslorafossottemo7244]

Bro are you selling🤩

[@kikiscustoms]

Maybe, maybe not…

[@fredrikslorafossottemo7244]

If i can buy it how much would it be?

[@AnDrEw122100]

Bahahaha

[@brockkincaid4694]

Bro great video but you guys really need to have a helmet on trust me you might think your just testing it but all it takes Is 1 fall and you could be retarted for the rest of your life plus kids are watching lead by example. Keep up the great work. Also I built a go kart with fuel injected 650 street bike motor..so sick and fun.. idea for ya

[@kikiscustoms]

Great point. safety definitely is important. post a video of your go kart, that thing sounds sick!

[@trinidyjohnson9295]

Yes and they where taping it live so if there would have been a accident the kids would have been exposed to a grown man crying and the possibility of a Band-Aid

[@yones_mov]

Good👍👍👍👍👍

[@kikiscustoms]

Yes!

[@loganpickle3673]

More unnecessary swaps plz!

[@kikiscustoms]

That is a must. Maybe a Bicycle with a dirtbike engine?