Cutting Bi Fold Hollow CORE DOOR

[@clydehillier7292]

Great idea on cutting a filler piece from 2 x 4. I’m going to do that too. Thanks!

[@Worldwidegiantgrowers]

That solid thanks for watching

[@Worldwidegiantgrowers]

Yes, much better way to go. Don't use pressure-treated lumber. I have seen people make that mistake and lots of places and construction.

[@Ablashak]

Thank you. Straight to the point. Very helpful!

[@Worldwidegiantgrowers]

Awesome thank you for commenting

[@JasonXBeats]

Lol I’m gonna slip my wood in, and spank it in! Lol awesome video.

[@Worldwidegiantgrowers]

LOL

[@andrewnorris1514]

Great Video

[@Worldwidegiantgrowers]

Thankyou

[@cbdyna]

Couple questions- Can the width of bifolds be cut down? Also, would you be able to point me to a video of one of those prehung pantry doors? One more question- I have a very small water well room. Opening is about 32 inch wide by 60 inches high. Any recommendation on type of door for this little opening and maybe if theres any companys that will cut them and ship them off to a person?

[@Worldwidegiantgrowers]

I’m sure you can custom order any size you want go to any lumberyard and talk to them at the contractor service counter. You could trim the width of the bifold may be a quarter of an inch. I wouldn’t bother with it much more than that.

[@cbdyna]

@@Worldwidegiantgrowers Thanks. Found a 32 wide bifold smooth and cut the height down myself.

[@Worldwidegiantgrowers]

Cool, sorry for the late response

[@ernieland2480]

Thank You!

[@Worldwidegiantgrowers]

@@ernieland2480 no problem glad to share the information

[@-NancyM]

Thank you!

[@Worldwidegiantgrowers]

Your welcome 🙏

[@Bigsmegma44]

My hinges are already installed. I need 2” total removed. I was intending on removing from the bottom only. Is there a good reason why I shouldn’t remove the excess from the bottom only? I enjoy your quips about OSHA and real wood! Thank you

[@Worldwidegiantgrowers]

I would hope you can re-block them you’ll have to add the block filler back in glue it nail it They want to contact a manufacturer I’m sure they have a phone number and ask them if this should not be done if there is a reason why?

[@Worldwidegiantgrowers]

Not sure what brand you have but I’m sure they have an 800 number

[@Worldwidegiantgrowers]

I would remove from the bottom only .One cut less chance for error.Keep the work down low not at eye level.If the door has a door knob hole already ?? You cant cut the top.

[@DemiDoc-dc1yg]

Amazing

[@yakicahoon1605]

I don’t understand the comment about prehung doors. Is there some way to have a bifold without the loose corner?

[@Worldwidegiantgrowers]

Yes, you can buy a prehung door and have it installed. You do not have to use bi fold door. Bifold doors are cheap. You do have a choice just like you do not have to buy a hollow door . You can buy a solid door.

[@makosharkcnc7730]

what size of saw blade did you use?

[@Worldwidegiantgrowers]

Well, it’s a 7 1/4 inch saw the 40 tooth saw blade is typically what I use 40 or more

[@makosharkcnc7730]

spin it forward ? I'm concern about wood chipping

[@Worldwidegiantgrowers]

@@makosharkcnc7730 score your cut line with a razor knife before cutting

[@makosharkcnc7730]

ty@@Worldwidegiantgrowers

[@Worldwidegiantgrowers]

Score the the line like three times

[@pault477]

Is this considered a composite door? Looking at 4 panel composite bifolds but instructions on website say they shouldn’t be trimmed.

[@Worldwidegiantgrowers]

Not sure if technically a composite.But They cant rub on the carpet,so they must be cut

[@Bigsmegma44]

“Composite” just means that it’s made from various types of materials. Or in other words. Not real wood!!!! LOL

[@Worldwidegiantgrowers]

Yes they must not have enough frame to be trimmed if you’re going to trim them you’re going to have to re-block them.

[@MrGaborseres]

Cool 😎 👍

[@Worldwidegiantgrowers]

Well, thank you

[@eunha521]

Can I trim 28 inch bifold doors down to 24 inch? I was gifted a pair and I really don't have the money to spend on buying a proper size.

[@Worldwidegiantgrowers]

How many panels two panels?

[@Worldwidegiantgrowers]

Yes

[@scorpio11bw]

I'm glad I found your video. I'm placing wood in mine too. Not the mf😂. Thank you.

[@Worldwidegiantgrowers]

MDF is garbage

[@JasonXBeats]

I just need an inch off my door, can I remove and 1/2 inch off top and 1/2 inch off bottom?

[@marcelog64]

Well, that is what I will try.

[@Worldwidegiantgrowers]

No you cant the hinge locations would be wrong

[@dustyflair]

Chicken S)(t design by the manuf.

[@Worldwidegiantgrowers]

@@dustyflair it's all gone that way billionaire greed . They make more money we get cheaper products.

[@g-track5065]

Don't call OSHA LOL!!!!

[@Worldwidegiantgrowers]

Lol 😂