Worx Hydroshot Troubleshooting: How to Remove Airlocks - WORX UK

[@c277474]

SPOT ON!!! Like those below - thank you so much! Was having problems, screwed bottle on, turned upside down - SUCKED BOTTLE DRY! I've used Hydroshot for years, so not working w/bottle was complete surprise. Once I ssaw this video, immediatelt went to my Hydroshot & GOT IT BACK!!! Never heard of an airlock, having thids shared over KZbin - PRICELESS!!!

[@bobbuilder6725]

Thank you so much for this. I was ready to bin mine. Can't believe this isn't even on the worx troubleshooting web page.

[@AntoniaMartinezPhd]

Thank goodness for this video. I don't know if you've shared this trick with your colleagues in the USA. I sure didn't get this advice when I called for support, and the advice they did give didn't work. It was so frustrating. Today, I combined their advice to fill the hose with water first with your advice to turn the machine upside down. Finally, after months of no success, it worked -- just in time to clean for the family visit.

[@nevarl3126]

You have no idea how much I appreciate your vid and fix. I was ready to invest in a new one. I guess I must visit the UK just to show my thanks.

[@WorxUK]

We are really pleased it was helpful!

[@feedingit]

Holy cow! The upside down trick worked? It was the first use out of the box and someone was ready to throw it out. You saved the day! Much appreciated.

[@WorxUK]

So glad to hear it :)

[@dainco08]

Muy bueno!!

[@emanuelgonzalezflores5523]

BRILLIANT!!! I had cleaned the little filters, put it sideways and nada. A bit counterintuitive to turn it upside down and pour water in it but it's 100% effective. Thank you.

[@nickijones5010]

Great to know it was helpful :)

[@skozra]

Did this earlier on today by pouring water into the bottom of it while it was upside down and this worked perfectly. Thanks !

[@delrey-p]

This is one of the best inventions on the market...

[@grahamskinner6240]

This worked for me, thought was broke and was worried might be out of warranty but working as before now. Thanks

[@droller7732]

Hey just brought one turn on dry air lock watched this video turn the upside down unit it primed took about 4 mins but it worked thanks for this video

[@tiffanytang1423]

This worked for my brand new hydroshot too!

[@ianpalmer4840]

Many thanks , about to take it apart, found your video and now it works a treat. Once again KZbin has the answer , Cheers

[@nevarl3126]

I have been trying for months to fix my sprayer. I did this and this really works.

[@nickijones5010]

Really glad to hear it!

[@chuckramseur8363]

Thank you for this. I went to use mine today and it wouldn't pull water. I followed your tips and it 's working like charm.

[@bluehazeboy]

Just had this problem,went & tried it by turning it upside down, job done & sorted 👍

[@WorxUK]

So glad it helped you :)

[@noodleschild]

Thank you.. bought today and this helped a lot.

[@williamfullman2639]

I use mine with my detail business and I shortened the hose and it works way better but thus is great tips

[@Nickpaintbrush]

The air lock I had was not in the sprayer but the hose, the sprayer worked ok when bypassing the hose

[@DacAL_8]

What I normally do is set your water supply bucket higher and keep the gun on the floor level and start powering it until the air is gone. Keep it at 5 secs interval so motor won’t heat up.

[@michaeloconnor7849]

Got mine going again cheers.

[@andersontibbetts950]

Thanks so much.👍

[@kevinmetcalf6371]

Thank you

[@PeggyM.]

Ours was brand new and it would not pump even with the little straw did the pop bottle trick with the straw upside down and squeezed yes it worked oh by the way our first one we left it out in the garage and next spring it wouldn't even turn on they told me that even a little cold froze it and they would not replace it for us cuz it was past the warranty so this new one has been in the house the whole time

[@hagbirdgreystar6948]

I used mine once last year. Now it's not spraying water and I haven't a clue what the issue is :(

[@rosskennedy7039]

Is ths brushed or brushless

[@WorxUK]

Hi Ross, this model shown is the standard Hydroshot but there is a brushless version WG630e.1. Hope this helps.

[@Martin-M]

Won't work on mine, the suction is very low any other reason ?

[@ryansouthworth7310]

Rang worx they sent me here, worked first time with a jug of water

[@nickijones5010]

Glad to hear this :)

[@hip62]

I have tried with the jug nothing is working the water sits in the hole... please advise I have no hose it has drawn no water at all seems like there is no suction even using jug method. Sorted now gave the unit a shake whilst upside down .... all that effort for the dissapointment that ensued... on full power not as strong as a hosepipe if you squeeze the end tbh

[@WorxUK]

Are you able to contact the after sales support team on the website as they will be able to offer advice.

[@copper426]

They are a load of rubbish dont buy.

[@nickijones5010]

They are well loved by hundreds of thousands of customers around the globe. Perhaps you were expecting something different from the product. It's logically never going to be as powerful as a plug-in one but it definitely has it's uses, sometimes is more ideally suited to certain uses than a plug in, and it can be used anywhere even where there is no water or power supply!

[@user-wp4zh6po3k]

NEW. N(ever E(ver W(orked - YET lololol. No water hose, one hand, forcing the second mouthful primed the pump!! (I also left the quick-connect attached) I use