WR250R Broken Oil Filter Cover Bolt Extraction

[@relentlessfpv1822]

Good to see you back on, been awhile.

[@Red_Dye_No.3]

I just broke broke one in same hole on my 2018 wr250r. Used a torque wrench and thought I had it set close to spec(7.2ft lbs) I used a file and got the jagged edges of the broken bolt ground flat so I could drill through the center of the bolt. Get the longer easy outs so you can get deeper in the bolt. Remember, easy outs are brittle, so drill as big as you can without drilling into the threads and use a bigger easy out. The bolts are small anyway so I know it's not the easiest thing to do. Yep, sucks.

[@quiksilverw0352]

Just snapped the larger of the two bolts then snapped my drillbit trying to extract it 😂😂😂 so now I have a whole new oil filter engine cover on the way lmao. The sound of that snap then the loose bolt will always haunt me.

[@turboman4736]

You don't use a drill and a extractor tool you had it

[@briananker7417]

Jammarules - I am looking into a wr250r as a short rider, and I would be greatly appreciative if you did a very quick video similar to your 'Short Rider Experience on a WR250R' which shows how much the lowering has improved your stance on the bike and where your feet land while sitting on it. Thank you!

[@holdenharvey783]

I did the same thing on my Honda crf250r and it’s a long bolt that Holden’s the 2 cases together and it snapped off all the way in the back and now leaks a ton of oil between cases

[@gionnisjourney3750]

What kit did u buy off Amazon ?

[@bboydawgy]

were you using a torque wrench?

[@Juicememelord]

Today is national hot pastrami sandwich day

[@raffie9526]

🤙🤙🤙

[@MicrowaveEvil]

This is what happened to me and I just took the whole damn cap off and unscrewed it with my hand

[@Kuhlyedascope69]

5:42 is why i came

[@ndn2589]

What extractor set is that