So we fully stripped the bike down, painted and rebuilt parts, sourced new parts, and put it back together. It's like a new bike now, and there will be plenty more videos on this bike to come. Thanks for watching guys.
Пікірлер: 133
@arixp90924 жыл бұрын
Good job I like the final result. Looks nice. But I do recommend when you color a engine that you make sure that you don’t use paint, if you can find a thick type of high temp paint go for it but over very little time you may see scratches, idk if you had cleaned the motor but you really have to scrub it with clean towels and paint prep. And last thing is that I belive you painted the valve cover rubber, the issue is that when it gets hot it expands so it may look the same becuase you painted it black but for an example if you paint it white you will start to see that the paint will start coming off when it expands. You did a good job on the frame but I do recommend that you put a peace of rubber or grip tape where you rub your foot on the frame by the peg because it’s painted and boot rub happens easily with paint, especially rattle can paint. It may look good now but over the years it may end up looking scratched but that’s not entirely a big issue since it’s a super moto and it won’t be rubbing on twigs. I recommend investing 80$ into a powdercoating machine or 20$ into a ceracoating machine becuase this is baked on paint/ powder. This is what Yamaha uses to paint the frame and this last longer it doesn’t exactly scratch off easily you probly would have to drop it, it’s very fun and easier to powder coat. But I think it looks awesome and I love how it looks, it’s amazing! I like the blue hubs too :)
@tdel86135 жыл бұрын
Spray painting the whole engine 🤦🏻♂️
@noiseyy85415 жыл бұрын
you can do that, people do it all the time as long as it's engine enamel paint its fine, people use it for cars too
@DODGEMSQUAD5 жыл бұрын
Why would you see that as an issue? People keep commenting it, and I dont really get why
@13nutkiller5 жыл бұрын
@@DODGEMSQUAD BIKE PARTS ARE POWDERCOATED or ceracoated!! at least you should use two-component clearcoat... painting frame and engine cases with spray is just ridiculous...
@Paolo-hx8lj5 жыл бұрын
@@DODGEMSQUAD just wait until you go for a couple rides.... paint will come right off from bootwear
@arkorks27845 жыл бұрын
Black engine bro
@GioutzinMertiri426f3 жыл бұрын
Great job you did there guys!! I personally disagree with the engine spray paint, most of the reasons are mentioned already on previous comments. The bike looks almost like my WR426F 😁 ✌🏻
@neilodonnell40726 ай бұрын
Nice work 👏
@gemstatefisherman34094 жыл бұрын
Nothing wrong with spray painting the frame or the engine. But you should have torn down engine and done each piece separately. Doing it like you did is very hard/bad for the engine seals it will dry them out much more fast, "shifter seal, kick starter seal," the grommets around the harness ECT.
@davejohnson30375 жыл бұрын
I wish I could have you do that to my WR400...
@DODGEMSQUAD5 жыл бұрын
Let us know what you think in the comments! And if you have any questions on this set up I'll be more than happy to help.
@edwinkarani55934 жыл бұрын
Beautiful piece.
@jrodfolyfe5 жыл бұрын
Painting the motor killed it would have left the beat up silver motor for when you have to rebuild it then once a rebuild is completely then clean up the motor that's the way I would have done it personally I don't like paint on motors but good job painting the frame and swing arm came out good
@maxelpogi63215 жыл бұрын
I should wash it first before i touch that bike😑
@DODGEMSQUAD5 жыл бұрын
Yeah, I wish we washed it better before stripping it down
@manueltuttas81275 жыл бұрын
what plastics do you run? do yz plastics also fit the wr frame?
@mrdestroyer5155 жыл бұрын
The reason the engine shouldn’t be black is because of heat, black won’t disperse heat energy as well as chrome or sliver plus oil leaks and problems won’t be as easily found and anyway any scratches will be highly visible but it’s your bike and your bike still looks amazing great video man
@jamieclague69115 жыл бұрын
Arent most modern engines now black?
@mrdestroyer5155 жыл бұрын
Jamie Clague they don’t produce as much heat and they also have massively better cooling systems and the main part is they are already covered up by the hood so a silver engine won’t make a difference except increase cost as they would have to make the engine shine before sale while black is black motorcycle engines especially a dirt bike engine overheat constantly compared to cars so they need every bit of cooling they can get
@pbowns5 жыл бұрын
Sorry no, that's incorrect. The paint color has nothing to do with heat dissapation.
@rab..4 жыл бұрын
What a load of shite 😂😂😂 in that case, how well does 2 inches of dried on enduro mud dissipate heat ? Paint colour is the least of your worries .
@theguch90385 жыл бұрын
What year is your wr400f? Mines a 98' and I had to upgrade to a later year rear swing arm because supermoto rear wheels are hard to find with the early year's smaller diameter rear axle.
@DODGEMSQUAD5 жыл бұрын
It's a 1999, so came with the larger rear spindle, yeah I heard that the 98s had the smaller rear axel, bet that's a pain!
@gouuful4 жыл бұрын
Super ! Size wheels and tires ? Thanks 🙂
@dominicglenn479511 ай бұрын
How much where the rims and where do I get them
@ProvokeDesigns5 жыл бұрын
Looks amazing guys. Good work!
@DODGEMSQUAD5 жыл бұрын
Believe it or not, after filling back up with fuel oil and water, it started up first kick 😂 couldn't believe it
@DODGEMSQUAD5 жыл бұрын
Thanks for all the great comments on this build video! We really appreciate it, make sure you check out our channel, as we're sure you'll find something your into on there, and if you want to see more of the bike give us a sub ✌
@joaopinto58203 жыл бұрын
the rear mudguard it s from which bike?
@alexchrome95604 жыл бұрын
How many hours or how often you change the oil and the filter? I want to buy this bike or maybe the 426
@edwinkarani55935 жыл бұрын
Artwork.
@DODGEMSQUAD5 жыл бұрын
Thanks so much!
@akuasel6275 жыл бұрын
looks awesome bro...
@tzhmis4 жыл бұрын
sup great vid... ive got a wr400F supermoto myself but its wont start easy, runs great full throttle but when i release its like a machine gun...maybe u know what is the problem?? would be great thx in advance
@DODGEMSQUAD4 жыл бұрын
Honestly I wouldn't know, you could play with the fuel screw on the carburetor though. There are a few guides online telling how far out it should be. That may help with your issues
@tzhmis4 жыл бұрын
@@DODGEMSQUAD thanks I tried everything... Found a hole in one of carbs tubes today maybe just maybe lol
@DODGEMSQUAD4 жыл бұрын
@@tzhmis any luck??
@tzhmis4 жыл бұрын
@@DODGEMSQUAD yeah after 5 years outside and me working on it for 3 days it started from first kick but... It stalled and won't start anymore haha tomorrow another day
@tzhmis4 жыл бұрын
@@DODGEMSQUAD i fixed it! played with camshaft timing and tadaaa, after mechanics not being able to fix it not mechanic me with spare time and an owner manual did it lmao
@El_rod3095 жыл бұрын
What year is that I have a 99 wr400f and I desperately need carb parts have any?
@akediyaperera76375 жыл бұрын
Nice Work Gyes.
@DODGEMSQUAD5 жыл бұрын
Thanks!
@TheRealKalEll5 жыл бұрын
Why supermoto a trail WR for city ?? Also why after all that work, do such a basic paint job frame/ motor ? Cash ?? And did the paint come off with the first/second power washing?? Curious is all cause it's such a perfect build and bike, you did a great job.
@DODGEMSQUAD5 жыл бұрын
Just fancied trying the bike in supermoto setup, the frame and paint was just a time thing to be honest, it never really intended to be a full strip down, all it needed was a rear shock rebuild, but after getting that out, I just carried on stripping and painting, and ended up where we did, paint is still perfect after a lot of washes, and now the bike has a full graphics set on too, it looks brand new, the next video on Sunday will show what it now looks like, so make sure you subscribe if you want to see more of the bike!
@TheRealKalEll5 жыл бұрын
@@DODGEMSQUAD Thank you Sir. NICE BIKE !!! Looks amazing.
@KRGGT5 жыл бұрын
Unpopular opinion: The ktm mask ruins the look of the bike
@Felixx6164 жыл бұрын
ktm mask-swapping everything sucks
@codenamenoob49734 жыл бұрын
Yes I'm just after commenting about that myself, it seems to be a weird craze everyone is doing and it just looks awful on all the bikes it doesn't belong to
@elraffydo67204 жыл бұрын
Wheels and tire sizes please?
@Jrocc8114 жыл бұрын
Anyone know of any pannier racks that will fit in this bike?
@stefanmarkovic81804 жыл бұрын
when you do it, why do it the cheapest way?
@mattsullivan86545 жыл бұрын
Are you running a battery for the tailight or headlight? Or can you just run it off the stator?
@DODGEMSQUAD5 жыл бұрын
No battery, its a bit annoying though sorting all the wiring as you have to keep the bike running to work out what goes where.
@micheleasson70123 жыл бұрын
u really spray painted a dirtbike after sanding it with a drill?
@gmindgjerd5 жыл бұрын
I guess potential leaks would show better on unpainted motor. And also, for how long will it be pretty? Looks awesome.though.
@DODGEMSQUAD5 жыл бұрын
I have a Honda grom also and the engine comes painted black from the factory, so I never saw issue with it, all the blue details pop so much better on a black motor, and it's more in keeping with the look I was going for. Thanks for watching though! Hopefully you'll enjoy more of the videos we make too ✌
@carterlynch7645 жыл бұрын
what foot pegs, shifter & brake pedal did you put on it?
@DODGEMSQUAD5 жыл бұрын
Apico. They make anodized bits for all types of dirt bikes
@alexsedlmeir75174 жыл бұрын
Looks great where do you have the front breakdisc from?
@DODGEMSQUAD4 жыл бұрын
Vmx wheels website
@alexsedlmeir75174 жыл бұрын
@@DODGEMSQUAD thanks
@ProvokeDesigns5 жыл бұрын
Did you do any servicing to make it start better?!? hehehehhe
@tylerolson0074 жыл бұрын
Can u tell me which headlight u used, I need an aftermarket like that.
@DODGEMSQUAD4 жыл бұрын
Universal supermoto Ebay headlight
@codenamenoob49734 жыл бұрын
It's a copy of a KTM headlight
@pirateK-hh8fc5 жыл бұрын
Super bien fait
@ericnaeve2345 жыл бұрын
You should have given the bike some service, check valves, carburator, schwingarm bearings etc. The worst thing you did is leaving the suspension in offroad setup. Guess you haven‘t done a Supermoto conversion before. A skilled rider would always change the suspension, but I think for your use it will work.
@DODGEMSQUAD5 жыл бұрын
Oil and filter were changed, air filter, swingarm bearings were stripped and re greased, and rear shock was sent away for a rebuild and re gas etc, just didn't manage to get any of that on camera, with hind sight I would've filmed a lot more of the details, as I had to machine spacers for the wheels too, and changed the gearing, but you never really know how popular a video will be, thanks for watching though, and hopefully you'll enjoy some of our future videos ✌
@honda81925 жыл бұрын
You sound like an idiot. Mr skilled rider.
@codenamenoob49734 жыл бұрын
People keep putting the old KTM headlight on everything and it just looks hideous on anything but a KTM, stock wr one looks good and it matches the aesthetic of the bike so I'd put it back on
@calvindirkmaat5 жыл бұрын
Where did you get rims and tires at?
@DODGEMSQUAD5 жыл бұрын
Vmx mate, from their website. Tyres I sourced separately though.
@milan51595 жыл бұрын
Hi, cool video. Why did u spray paint ur airbox?
@DODGEMSQUAD5 жыл бұрын
Hey thanks! It's a red, air filter spray oil. It's easier to spray the oil on than to have to soak it.
@milan51595 жыл бұрын
@@DODGEMSQUAD ahh yeah I later thought of that lol. Did u already rode with it?
@wizardrhyme95975 жыл бұрын
Are wr400 legal for the street? I want to build my own supermoto in the future but it has to be street legal and I don't want a KTM.
@DODGEMSQUAD5 жыл бұрын
Yeah, they're fully road legal.
@prearc37065 жыл бұрын
Husqvarna fe 350 ?
@lekhanh77015 жыл бұрын
Where did you buy those accessories?
@DODGEMSQUAD5 жыл бұрын
All 'apico' from ebay
@lekhanh77015 жыл бұрын
@@DODGEMSQUAD What's the name of the rim?
@DODGEMSQUAD5 жыл бұрын
@@lekhanh7701 vmx wheels
@lekhanh77014 жыл бұрын
@@DODGEMSQUAD can you give me all accessories links ?
@jcg1435 жыл бұрын
Mis ojos sangran...
@mr.liteonnn46694 жыл бұрын
Can ask u quastion can u customization Honda grom engine make it more 125 cc
@DODGEMSQUAD4 жыл бұрын
I think they sell a 180cc kit, but it costs a lot of money
@mr.liteonnn46694 жыл бұрын
Thanks I need just know keep going
@elmerjacobpeligromarroquin35875 жыл бұрын
Muy hermosa
@BledaTurk5 жыл бұрын
Bad idea black painted engine, Engine have to be silver or greey always, if possible chrome
@mannypantera90705 жыл бұрын
Why is that?
@ViceVersace5 жыл бұрын
You know that chrome is not going together with heat, right?
@TuanAnh19925 жыл бұрын
what is your background video music, please?
@DODGEMSQUAD5 жыл бұрын
It's just a free track that comes on my editing software, dont know the name I'm afraid
@TuanAnh19925 жыл бұрын
@@DODGEMSQUAD so sad to hear that :( Thanks, and your bike is great also (y)
@slorider16715 жыл бұрын
Why u paint the engine?it is grose
@DODGEMSQUAD5 жыл бұрын
A lot of people have asked this, and I dont really understand why they do, the engine was chipped and not very clean, now it looks like new is is all one colour, it looks far better than it did
@slorider16715 жыл бұрын
Yea but you can't jsut paint it if i wold duing this i wold paint it shiny shilver and not at all mby just black hat ob cilinder...and mby some shiny blue on the bolts...in this way wold look wayy better🙂
@azimhamidun72915 жыл бұрын
@@DODGEMSQUAD imo, people commented on that because the way you make it, it is like a lazy way of doing restoration. Its better if we could see more work into cleaning the parts, especially the engine, to make it look fresh rather than just spray paint it
@DODGEMSQUAD5 жыл бұрын
@@azimhamidun7291 the engine will be having a rebuild at some point this year, so a full strip down, it might not have come across well in the video but the old silver was really scratched and tatty, after painting everything else and now with all the new stickers on it (can be seen in latest video) I knew the only thing that would let it down would be the engine, so i used a Matt finish high temperature paint and hit the whole thing. It still looks great 3 months on and if ever it gets scratched now, I can just hit it with some more black paint. ✌
@carlosmoreno-ri8yc5 жыл бұрын
Pero falto pegarle una lavadita primero
@arkorks27845 жыл бұрын
Every part spray painting
@mohdzuhdi39965 жыл бұрын
notice your front tyre not in right direction.
@christomley76485 жыл бұрын
Mohd Zuhdi Saupi if you’re know anything about motorcycles then you’ll know that the front wheel is going in the correct rotation. The front wheel goes opposite of the rear wheel
@peruano1brasilero2654 жыл бұрын
Yo quisiera remodelar mi moto de es manera pero no puedo algun dia lo are9
@BledaTurk5 жыл бұрын
But supermoto super idea
@nickthegreek17134 жыл бұрын
Oh my god.Do not spray paint everything. At least first take them apart and then put em in the oven!!.
@jstca2 жыл бұрын
9:08
@gregbingaman20923 жыл бұрын
Spray paint....
@pinkmotovlog71524 жыл бұрын
I lighrt
@cakkadutchanel70214 жыл бұрын
Like
@dornchannak21094 жыл бұрын
Hello
@DODGEMSQUAD4 жыл бұрын
👋
@darudesandstorm6833 жыл бұрын
Spray painting a dirt bike should be illegal
@alex_matroskin4 жыл бұрын
Ну вы и колхозаны)
@nicoantoniomisceobeato11814 жыл бұрын
no me gusto mucho la forma en que hicieron el cambio de estilo, fue como si te cambiaras de ropa sin darte un baño , del resto todo bien .
@geoffroykohler24154 жыл бұрын
repeindre le cadre a la bombe ... en laissant une biellette et un axe moteur dessus ... ne remplacer aucun roulements ... mettre des durite bleu de chez wish ... et d'autres chose degeu ... bref du grand n'importe quoi
@user-bz3dj3jr8f5 жыл бұрын
Покрасить раму, маятник и двигатель с балончика, каким же идиотом нужно быть, чтобы так сделать... Эта краска отлетит сразу же! Лучше бы в двигатель, подвеску заглянули, жидкости поменяли, подшипники и оси смазали! Губы мотоциклу накрасили, а по факту внутри говно... не надо так с техникой, нужно основательно делать, а не абы как...
@captaina44585 жыл бұрын
Cheap and rushed build.
@rab..4 жыл бұрын
Easy to say when you aren't the one who is footing the bill or spending the manhours on it. You don't need to shit on the guys efforts just for the sake of it.