Wrapping REAR COLUMNS in FORD TRANSIT

Continuing our Adventure Van conversion Matt is wrapping the rear columns! Also before you ask, yes we do sell the fabric used in the video on our online store
Give the video a like and if you have a question drop a comment!
➡ Store: avcrig.com
➡ Follow us on Instagram! / avcrig
Tools/Materials you need:
(Using these links helps out the channel through residuals)
90 Glue: amzn.to/3N6a9Hi
Aluminum Flashing: amzn.to/3iN57Cu
Roller: amzn.to/370rrGj
Masking Tape: amzn.to/3uDCpcJ
74 Glue: amzn.to/3JWb0ZY
Clamps: amzn.to/3wMNYkE
Rubber Mallet: amzn.to/3K1zDEU

[@comradeg2719]

Best videos for Transit Vans...Appreciate all your videos and the time you take to respond to the comments.

[@AVCRIG]

Thanks for your support! We’re on a mission to make the Transit the best and most accessible van out there.

[@Thedestressguy]

Another fun and fantastic video. You truly make building a camper easy and that instills confidence in us to get going!. Keep the videos rolling!

[@AVCRIG]

That’s an awesome thing to say. Thanks for watching.

[@donaldhoshaw2066]

Great video! You know your stuff. I’ve used your techniques on my Van build with great success! Thanks.

[@AVCRIG]

Great to hear!

[@skipperga]

This video was extremely informative. Very detailed! Great job! Thank you for sharing this knowledge and talent with us. Question: What type of fabric material do you use? Where can we purchase it? Question: What type of foam do you use? Where can we purchase it? Thank you for this video.

[@letjeffbejeff]

This SO helpful. I consider myself a pretty capable DIY fella, but the learning curve for converting a van can be steeeeeep at times. These videos do make it easier, as more fun.

[@AVCRIG]

Thank you! Even these tutorials are fun to make.

[@travisboeh996]

Just getting to this part of the build. Thanks for the details - there's no way I would have figured this out on my own.

[@AVCRIG]

Awesome!

[@christosmaninos1570]

Thank you for another spectacular video, I learned a lot.

[@AVCRIG]

Glad you like it! Thanks for the support.

[@michaelowenroberts]

Awesome. That’s a job for me this weekend. Thanks for the guidance 👍🏻

[@AVCRIG]

Awesome. Just in time tutorials. Brought to you by AVC 🤪

[@dawnsmith7189]

Good video. For the algorithm. Subscribed as well

[@van_mod1]

Thoroughly enjoying this channel and learning a ton. Thanks Matt!

[@AVCRIG]

Glad to hear it!

[@van_mod1]

@@AVCRIG I sent you an email regarding customizing your flooring system panel that is most forward in the van (at the slider opening). Please take a look and let me know if this is possible.

[@matthewdunkerly374]

@@van_mod1 we do custom for in store pickup only.

[@van_mod1]

@UCazSgCStg8_hp0TBZDhiXIw road trip! :) will you do the subfloor installation while I'm there?

[@matthewdunkerly374]

@@van_mod1 absolutely

[@onionhead5780]

For the algorithm. Subscribed as well. 👍

[@AVCRIG]

Thanks! We’re getting close to a finished interior tube.

[@johnbecay6887]

good info here. the covered rear pillars look a lot better

[@AVCRIG]

I think so too!

[@williamcarver1549]

You guy's have been producing awesome content! I see the wall upholster kits on the AVC website. What color was used in this video?

[@AVCRIG]

We used Woolen for this build.

[@neal5626]

Nice videos! I'm binge-watching your channel and appreciate your simple design choices and high signal-to-noise ratio videos. (Particularly since you've ditched the background music (couldn't resist) :-) Q: Why not apply a single fabric strip over the arch and sides instead of three pieces to avoid the (visible) seam covers?

[@AVCRIG]

The fabric we use is really hard to stretch that much. It’ll do some things, but I’ve never gotten it to bend that much.

[@DougLooney]

Got this done! I would recommend adding a step to mask out the section under latch covers (with 1/2 inch margin) and other plastic fittings prior to foam - then removing that foam before applying the fabric. I am unable to get my latch covers or light control panel to snap back into place. I did successfully use this technique to keep the rear lights (then partially hid them under decor).

[@AVCRIG]

That’s a great suggestion. I’ll give it a shot on our new van!

[@billyk7831]

Would you still be able to install bug nets like the bug wall? That also gets installed under the weather stripping. Would the foam, fabric and bug wall material be to thick for the weather stripping to fit back on?

[@shawar1979]

Great videos, however how do you access the rear tail light bulbs if one burns out? It appears you upholstered over the access ports.

[@AVCRIG]

You can remove the tail lights when you open the back doors.

[@grantwhitcomb7737]

What is the material you used to cover over the foam? Is it a 4 way stretch?

[@brewbag99]

thanks for the awesome videos! probably a dumb question but can you use EZ Cool instead of the foam you used? thanks

[@AVCRIG]

I don’t see why not. If you’re using a heavy fabric like we do you’d probably not notice a difference. With a thin fabric you may notice a wrinkle or two

[@oliverwilson9044]

Another great tutorial. What is the thickness of the foam? 2mm, 3mm, 5mm…

[@jamilchavez4592]

This is America my guy.. 😂 1/8” landau foam

[@AVCRIG]

That’s right. 1/8” foam. But 3mm would be basically the same.

[@toomuchhair4553]

Hey Matt, great content! (Subscribed) You don't mention and I can't tell.....but did you spray 3M 74 on the foam side? Or ? Thanks from an appreciative Sprinter owner!

[@AVCRIG]

We do yes. 90/94 would also work for this application. Landau is closed cell and doesn’t melt with 94. The 74 we use just tacks up faster so we can work faster.

[@toomuchhair4553]

@@AVCRIG Thanks!

[@TheDex302]

When installing the foam, did you spray the foam too with glue?

[@AVCRIG]

Yes. We spray both sides and let the glue off gas till it doesn’t lift on your finger.

[@moisescastrolepe]

Which Kind of foam is this one?

[@Hyperlooper]

Does the 3m 74 hold up ok in high heat? I used 3m super 77 for something similar and had a lot of issues.

[@AVCRIG]

74 does MUCH better. 77 is not really meant for this kind of application. It’s more for mounting photos and craft projects.

[@michaeljuers574]

Is there a reason you changed the adhesive you used on the video to the one you recommend on your store?

[@AVCRIG]

Sometimes Amazon does that based on your location. Not all glues are available in every market. Sometimes the link just gets messed up too. Thanks for the heads up!

[@mitchellkauffman6799]

Great Video! I've seen people not use foam and just adhere the fabric directly to the pillar. Is there a reason you used foam? Also what is the difference between the 3m 90 and 74?

[@AVCRIG]

We like the way the foam softens the wrapped sections of the van. It does add a warmer feel but no appreciable insulation. It’s definitely not necessary, but we think it is worth it. 90 is a general purpose adhesive. It will work just fine for this. It will melt the “blobs” so maybe look for one can of 74 for that. We like 74 for the wall’s because of a few things. Foam and Fabric specific, fast tacking, and orange color (optional on 90 in red). The color is nice (especially in a white van) to see where you have sprayed.

[@mitchellkauffman6799]

@@AVCRIG thanks for the reply! That makes sense! I was also wondering, do you guys just use self tapping screws for your roof framing?

[@matthewdunkerly374]

@@mitchellkauffman6799 we do, but we bolt up the ceiling into 8mm inserts.

[@benisikoff]

so 77 can be used on the landau?? is there any other advantage to the 74? it it stronger? cause the 77 is 3x as cheap and locally available@@AVCRIG

[@TheDex302]

So I’m worried about removing the door catches on the top rear of the van in order to wrap the rear columns and top like your doing here. Do you guys have any other videos or resources that show how to remove and reinstall the top rear door catches safely?

[@AVCRIG]

You just pull them out. It’s very simple. In the Sprinter there’s adjustment, but the Transit is stationary. The only thing to solidify would be the torque specification.

[@TheDex302]

@@AVCRIG gotcha thanks. I actually figured it out, it is much simpler than I thought it would be. Thanks again!

[@outthere9370]

?