Wrench organizer

I have found a way for storage of wrenches in my workshop. From this point I have forgotten about long search of the necessary key, and also about a constant disorder in a box of tools.

[@FrankLadd]

Thanks! This is just what I need. I hate having them in drawers. Looks like a straight forward build.

[@MrPhil1969]

Great idea. Great video, quick and to the point. No whining as to why you're doing what you are doing. Ya just did it. Excellent.

[@big_mike_nyc]

Straight forward and to the point! Those wrenches are hella old wow!!! 😲

[@jackfarrell4727]

Very nice, looks like those wrenches go way back. Here is a great tip for attaching wood to masonry. Drill a 3/16 hole with a masonry bit put a 3 or 4 inch piece of tie wire in hole and drive a 16d nail into your hole and or 2x4. Cheapest best hold ever.

[@SteveBadger-l9c]

Now thats what I call a good idea. Oh well done!!. Im gonna copy this , and even try to improve on it. ( thats a coat of clear vanish , so not really innovative but its all im gonna do) . Thanks for sharing. I was struggling for a simple idea that I could actually make without loads of power tools.

[@josephmartinez9249]

Amazing idea. Simple, and well thought out of the process

[@0dbm]

Nothing will ever beat a tool roll imho

[@robertdiamondoil2384]

My grandfather gave me some wrenches like those he said nuts and bolts use to be square, good idea

[@richardbrown5346]

What a nice wood shop .great job

[@ASliceofWoodWorkshop]

That is a great design. Would be cool to put on a french cleat so it would be portable to take outside or to the workbench.

[@34stzoo]

Wow so simple and yet so creative!

[@miltonbravo5655]

Felicitaciones por ése trabajo y compartir tus conocimientos un saludo desde Uruguay

[@joey6.449]

Those wrenches belong in a museum

[@johnm5714]

Someone needs new wrenches for Christmas--maybe a label maker too and you can label them

[@Be_Good_Do_Good]

What a craftsman! Impressive flow of efficient, accurate movement. There is certainly a ton of experience in those hands. Well Done.

[@Raul28153]

That's gotta be one of the nicer ways to do it Slanted so ou can see the denomination. Would lay in a tool box nicely I like your older open-end wrenches. They all look like they are the same make bought all at the same time. I'm guessing Gramps took care of his tools

[@mad_wheel]

Apparently I also have to keep these open-end keys, and pass them on by inheritance))

[@valterleao6795]

PARABÉNS, gostei muito da sua competência e habilidade !!!

[@brackforn]

Nice job. I’m going to copy this if you don’t mind.

[@travelingkaspersworld4096]

looks like art on that brick wall

[@wild3985]

My friend, you are beautiful work.. the keys is very old

[@handymanhoney-do6881]

Love the design--any thoughts on making it of steel or aluminum square tube? Having magnets imbedded would hold the wrenches in place and allow it to stick onto a steel tool cart. It would be fairly simple to mark the notches and cut with a grinder.

[@mad_wheel]

I like your idea and of course I was thinking of using materials like sheet metal. I will apply this idea after I find another bunch of keys for the keeper)))

[@sicstringerman]

Awesome vid. Awesome idea. Thanks for sharing brother!

[@jonatacosta1797]

Excelente ideia...simples e funcional!! Very good!!!

[@rrr-os6kc]

I seen few video of your really man you have skills so finishing in your work really no words for you one man army good luck

[@elvisisalive2716]

Abe Lincoln called, wants his wrench set back

[@Trasher6]

Abe's Grampa gave him that wrench set too !

[@cpanta9343]

Good idea and practical. Thanks

[@Blakey]

looks very good :) cant wait to see more from you!

[@cognitor900]

Did you find that amazing 10mm wrench? I’ve never been able to find any of mine and it doesn’t matter how many organizers I put up!! Nice video. To the point and no justification or rationale used as none is required.

[@burp1914]

I think it left town with my 10mm sockets.

[@TheFabulousCube]

@@burp1914 They're at the pawn shop, I pick them up by the handful. You should come see them sometime!

Nice idea and thanks for sharing it.

[@coolmusic1579]

Now your going to have to clean up those wrenches, what brand are they.

[@TheRealGrandadNo1]

Those spanners need some tlc for certain!

[@upsidedowndog1256]

That was cool. Great music. I love the old wrenches!

[@reinadobrandao9310]

Simplesmente maravilhoso, parabéns 😊

[@junaidtahir4688]

wrench numbers can also be labelled for ease of selection

[@rubbermallet3873]

junaid tahir wt? only stupid ppl will mark with numbers a surface; you must be able to appreciate, compare and choose rapidly after guessing what size you need on any tool, it's been like that for decades and now you want to change that with a google brain? that is so unprofessional 😂

[@Art-my9je]

Отличное решение!

[@ThePheonix2009]

Cool Idea.

[@LK-xe4vn]

simple but fantastic... cool. thanks for idea

[@EfremPS]

Классная тема! Молодец!

[@MiguelBricaBrac]

Yes, I like it. Good work.

[@dankrzeminski6370]

Looks like they might be a little fragile and break at the base with the grain

[@mad_wheel]

At least they are still in general condition, and they hold rather weighty keys in their hands, but with a conscious desire, many things can be broken))).

[@Professional_Youtube_Commenter]

nice idea, but the way the grain runs it looks like some of these bits will snap.

[@yoruhana190]

They will. Did this while ago now i search for another idea.

[@QueernMental]

Try using MDF or plywood. Stack to thickness.

[@mammambo2222]

Thanks videonya,

[@giovannimagalhaes9459]

Show, fácil vou tentar fazer.

[@Index_Rock_Classic]

very good idea and very nice the music

[@robertwalsh5461]

You might want to run those tools through a large tumbler full of walnut shells or sand and then take a fine point marker and mark the sizes on your wooden thingamajig. Then it would be really choice!

[@mad_wheel]

Thank you, I may apply your wishes)

[@handymanhoney-do6881]

I appreciate a little patina on classic tools. A little character and imperfection makes it unique……like a couple of scars or stretch marks on a milf🤣

[@frankotero9553]

What size drill bit did you use?

[@mad_wheel]

10mm

[@SeacrestTv]

Thanks for the idea it selfs me for organizing my wrech

[@georgerepos2365]

Outstanding great and awesome

[@newenglandyankeeliving5052]

I have that sane router table and it’s just as covered and stained lol

[@butchmontgomery9799]

what angle did you use ?

[@barddzen]

What angle are the cut outs for the wrenches?

[@mad_wheel]

Any no more than 90)

[@grzegorzkleszcz4122]

Szybko tanio poprostu super.

[@kerissajohnson4804]

What angle did you mark with the protractor , and how much space between each hole

[@mad_wheel]

This is all individually, I was guided by sight based on the size of my keys)

[@sean.g4516]

@@mad_wheel what size drill bit

[@SKTWoodDesign]

Great Idea just made this. - makes sense

[@KamiCrit]

I have found the guy who buys open end wrenches!

[@virriki627]

Very simple good idea, good implementation. But music is terrible!

[@lostintime8651]

i muted it. video did not require sound

[@DRPowell]

Music kicked ass!

[@Rein_Ciarfella]

FREAKIN’ DITTO!!! :)

[@kilnprabu]

Sir this is not coming properly,do drill crossly or drill straight,,I don't have a table saw,I do have a jig saw but the 70degree cut does not match the end hole,can you tell me what mistake I am doing

[@toolinhand]

Wow. That's great!

[@Duettoholger]

cool organizer - get some nice an shiny tools :)

[@yahmanml]

Very cool!

[@ozmobozo]

Man i like your channel

[@mad_wheel]

Thanks!

[@kurt8655]

Great channel man keep it up!

[@mad_wheel]

Thanks for support!

[@dorianwinchester4789]

Nice idea and Iiked the music.

[@waitersluvhjy66]

I was using woodprix instructions to make it and I did it already :)

[@Index_Rock_Classic]

very nice the music

[@ALKUKES]

Why would people dislike the video?

[@lostintime8651]

Old useless wrenches, But nice art piece.

[@yoruhana190]

Maybe because it will fail after some time.

[@nathanspires2600]

Yoru Hana how will it fail?

[@danwells7691]

that made my day

[@ginoasci2876]

Do you use those wrenches?

[@mad_wheel]

of course

[@howtodoitdude1662]

Nice work but too much work to make. You can buy a similar organizer. Thanks for sharing!

Well you can either make it yourself or pay a sweat factory $40 to pump out 2 of these for you holding about 15 wrenches each. I personally get more satisfaction rigging up my own organizer.

[@jeffcarter4500]

Perfect 👌

[@matiremontuje5107]

goood job

[@somnathburud5361]

Nice

[@husenvaghela8076]

VERY GOOD IDEAS FOR TOOLS HANGS

[@adilalhumady1672]

so nice

[@relaxandregenerationchanel8887]

First I congratulate you for 100 000 subs. and I wanet to ask you how to start my own you tube chanel and be successful like you?

[@seboss4831]

Super!

[@bombaydan]

Brilliant

[@mrsyed8828]

Good idea

[@theSAMYZERA]

Thanks for idea

[@johnwhitehead4809]

cheers, will make one.

[@stjepanjuraic649]

Cool video. thx

[@joelhollard2040]

what is the angle of cut please ?

[@mad_wheel]

The angle is selected experimentally, I did not measure it))

[@joelhollard2040]

Damage because I made several unsuccessful tests because the angle is not suitable Thank you for your reply

[@kodiham7532]

joel hollard Nice video! Could you please measure the angle for us, thanks!

[@joelhollard2040]

sorry but it's not my video I asked myself the angle

[@kodiham7532]

@Mike Keller Got it, thanks!

[@wdbland0820]

Awesome!!!v Add labels.

[@bachirramdane2947]

Ok good job👍👍👍👍👍👍👍💪💪💪💪

[@lhslguevara]

Wrench, wrench, wrench, screwdriver.

[@franciscodaschagasmoraismo8252]

Muito bem balado gostei

[@goldmaster9261]

Nice 👍👍👍👍👍👍👍👍👍👍

[@robsarchery9679]

nice

[@johnmcook1]

You went with the grain it will break very easy should have turned it 90 degrees and went against the grain.

[@mad_wheel]

Despite all this, it serves me to this day and nothing has broken)

[@johnmcook1]

@@mad_wheel this could be made from pvc cut in half of metal tubing cut in half also.

[@benjaminbismuth8326]

👍👍👍

[@luigihidraulica]

Show de bola

[@madometal]

Cool n simple

[@ashlyfink3445]

Must buy router and drill press now 🤣

[@mad_wheel]

you don't need to buy anything, you can do everything yourself))

[@greg6107]

Fabulous idea, T Y

[@phillipboudreaux4173]

I like that

[@IxIBishhIxI]

Hi there, we would love to share your work on behalf of Tradesman Banter (Facebook) with full credit. Please let me know if you grant permission to share? All the best with your channel!

[@calebburnsred]

fucking epic, just wish i had the equipment to do that lol

[@110welding]

very kool

[@ggrandparitsema4878]

Henry Sanchez n by by by No no by

[@snap-off5383]

chicks dig it.

[@adampuckett6023]

He

[@ravindrkumarravindrkumar9165]

naic

[@0009976139]

me gusto la idea