The performance of this engineering masterpiece is simply staggering.I just cannot visualise a load of 3200 Tons!
@cianbaradas95228 жыл бұрын
10x the weight of a CNRL coker or even more
@irongiant61125 ай бұрын
a small warship.
@Lwaww4 ай бұрын
Around 3200 Fiat 500
@carterhall26534 жыл бұрын
I've got this one, but it's still in the two boxes shrink wrapped together as they were 2 years ago when sent to me. I dont want to open the boxes until I'm good and ready to build it. Or until some one is ready to offer me more than I gave for it 😁👍💰💰
@jjjhj35612 жыл бұрын
I have an offer for you
@markolysynchuk52642 жыл бұрын
Such an insanely enormous model! I wonder how big this thing is in real life, you might need a Liebherr LTM 11200 to assemble this crane
@hudgyderobertis12 жыл бұрын
For that much money, WSI should have thrown on some hydraulic lines and tiny graphics. But it still is, without profanity, a very nice rendition of the actual crane. Excellent review too, by the way.
@repalmore7 жыл бұрын
This is one of those things that I would love to have but have no idea where I would keep it. Super cool though. Kinda funny an off the shelf nut and bolt works well for a scale model. Thank you for posting.
@nikerailfanningttm90462 жыл бұрын
that's if you can afford it....its over $1K....Jesus Christ.....I want this model so bad...but I can buy many more 1/50 scale Liebherrs with 1k lol
@csx198111 жыл бұрын
that hook is insane
@mingming96045 жыл бұрын
The turning speed according to the pdf from sarens is actually 6 degree/min so actually take 1 hr to turn 360 degree!
@fregaropa10 жыл бұрын
could you do a review on the sword 4x4 or 6x6 (depending on choice) p series snow plow ? its a great model and it will cost you relatively little! it also looks great as a bulky dump truck ! :D
@richardwatts96654 жыл бұрын
switch the boom bolts, looks like long are in front boom, and short one on back which is thicker than the front as noted in pic
@Dillyvl12 жыл бұрын
the original takes one hour for a full rotation. saw the model in the sarens office and it looks great.
@chuckkelly12255 жыл бұрын
We would like to thank MRS HAND CRANE. For helping MR HAND CRANE Putting the Huge Crane together
@CranesEtcTV5 жыл бұрын
Actually, Miss HAND CRANE.
@martindollipanjaitan Жыл бұрын
Few months ago this crane actually used at my refinery project. Ngl size is sooooo huge
@brianhayes71666 жыл бұрын
You are the best when I found you
@easyaussietarget33555 жыл бұрын
So nice I work for Sarens operating a C C2800/.1 I Cannot afford to buy one of these but would in a heartbeat with a decent windfall! Nice video man:;;
@dbdrdbag12 жыл бұрын
An eye-opener! Is this the largest model you have ever owned?
@williamelkins114211 жыл бұрын
actually saw this crane in service in America. Chopperguy's video of the crane does it justice for it's size.
@TestIntegrity3 ай бұрын
Hey is there a way to buy this crane because I couldn't find it
@SharpShot-qs8hv7 жыл бұрын
Do you sell models because I would love to buy one for my living room to make it look nice
A donde se puede averiguar el precio de esa replica a escala?
@Plantss4592 ай бұрын
Is this the biggest model?
@websitesthatneedanem5 жыл бұрын
Did you actually purchase this crane?
@kingli41594 жыл бұрын
These WSI Big Boxes Are HUGE!
@Skyryderz2 жыл бұрын
Could you please tell me how much sand is used for ballast on this model?
@RB_Plays_YT2 жыл бұрын
It can be variable as you can load 1-32 of the containers and it depends on the type of sand and how much you fill the containers
@EdvaE3912 жыл бұрын
Who making those models? I want an daf xf 105 tractor truck but i cant find it :-(
@qedqubit3 жыл бұрын
uh.... how many times do i have to multiply my AWE of this model, to scale it up to the real thing !?
@KaiserStormTracking3 жыл бұрын
This thing is the worlds largest Ring Crane in RL so alot of times. you can see Big Carl at work in the UK at a nuclear power plant construction site
@manusk406 жыл бұрын
Did he keep this Or did he sell it on ?
@CranesEtcTV6 жыл бұрын
Only he knows.
@manusk406 жыл бұрын
But you are he ☹️
@Penitent Жыл бұрын
How heavy is the modal?
@bensscalemodels495212 жыл бұрын
hey did u do a review of the 330dl
@TestIntegrity3 ай бұрын
How do I build the THING???.
@Sgt_Hest12 жыл бұрын
Best model ever :) I don't even want to know what the price is, but it looks really great.
@Papa7Bravo10 жыл бұрын
I thought the LTM 112000 stands much taller with the T7 Boom and liffing
@Hemeralopie4 жыл бұрын
awesome model. does anyone know what the price is for this one. I'm just curious
@FerroequinologistofColorado2 жыл бұрын
From what I remember when looking at the DHS die-cast website years ago this model was 2,000 dollars
@zaxisontherun2 жыл бұрын
More than 1500$
@abbetjohngalarpe75255 жыл бұрын
Can those containers fit in the container trailer in a truck?
@CranesEtcTV5 жыл бұрын
They are the size of regular containers for easy shipping.
@ianflyff69455 жыл бұрын
I need it to my collection
@cranemann259 жыл бұрын
Love the videos though i can't afford them i wish you would tell the price
@jonaszeidler88049 жыл бұрын
Lamar White 2 seconds of google work and voilá! 1.550€. Not a hard job, is it?
@cianbaradas95228 жыл бұрын
yo this is the reason i subed to this channel
@lachithorne7555 Жыл бұрын
How much did it cost in aud
@eds1994fatboy6 жыл бұрын
So a friend of mine was a teacher at the iron workers of NW Indiana 595 Apprentiship Hall.They had a red/white giant crane on display.Not half as big as this one but I was told that crane kit was about 750.oo.Man....I just wanted to play wiff it in the dirt....lol
@jasonpierce328812 жыл бұрын
what is the assist crane in the beginning of the vid
@CranesEtcTV11 жыл бұрын
SIKU models are closer to toys than collectible models so I probably won't collect them.
@bobmicals530512 жыл бұрын
i love your channel i watch every video everyday i check on your wedsite
@helmuthschunke30996 жыл бұрын
Das kann doch nicht wahr sein!! Da baut man ein sehr realitätsnahes Modell und der Hauptmast wird mit normalen Sechskantschrauben als Gelenken zusammengebaut. Hat der wahrscheinlich doch hohe Preis nicht mehr für ein paar modellgerechte Bolzen gereicht?
@darrinb56949 жыл бұрын
how do i get this model from a website or from ebay
@CranesEtcTV9 жыл бұрын
Darrin Buiso www.sarensshop.com/shop/scale-models
@jonaszeidler88049 жыл бұрын
Insane. This thing costs as much as a car, not even a bad one.
@damullor37578 жыл бұрын
no on a Website it costs 1.650 € that would be a small car
@jonaszeidler88048 жыл бұрын
florian mueller Uhm, you can get PLENTY of cars for that amount of money. I'm talkoung about several good condition BMWs (3 series, 5 series (E34)), several VW Models (Passats and co) and so much more.
@damullor37578 жыл бұрын
+Jonas Zeidler oh sry i thought you mean cars which costs 30.000 like Audi a 4
@damullor37578 жыл бұрын
+florian mueller are you german
@damullor37578 жыл бұрын
+florian mueller + Jonas Zeidler sry
@roypatterson99108 жыл бұрын
I think it's funny how you say thread, which sounds like you are saying Fred, and weaving sounds like you are saying Reaving. lol. Where are you from? England? Good job telling everything though, it seems like you really know what you are doing and talking about. Thanks
@Sarge928 жыл бұрын
huh? theres a way to say thread other than fred?
@aimeeroserallos5457 жыл бұрын
Roy Patterson it's reeving and not weaving
@forevermirin81946 жыл бұрын
what do you say treed
@Lukeaduke5106 жыл бұрын
Honestly, the narration is off-putting. I can't get over the intonation and speech impediment.
@CranesEtcTV6 жыл бұрын
Thanks for your honesty. I am sure people would like to believe you are honest even if they suspect otherwise.
@rcmast3rtract0rking12 жыл бұрын
that is massive i would love one hoe much was it??
@duffy128512 жыл бұрын
whats the max capitacity of the model?
@JackFlemingFan112 жыл бұрын
Excellent video of an amazing model!!
@Coaltrain87. Жыл бұрын
Switch the bolts from the a frame butt to the boom butt they are backwards I'm sure you know this by now but js
@nobodyneil23346 жыл бұрын
WHAT WE SHOULD TYPE IN GOOGLE TO GET THIS CRANE PRODUCT
can you get SIKU models and the golden cat bulldozer
@country2theend12 жыл бұрын
How much does it cost
@wernerrunkel53786 жыл бұрын
Where is such a monster used ? ( in reality )
@dinonugget71146 жыл бұрын
How old are you?
@bonapartelek12 жыл бұрын
Who much is this model in USA money??
@MrBryan8612 жыл бұрын
This crane is just massive!!
@hannes14676 жыл бұрын
How high is it
@Nonong24912 жыл бұрын
super massive model, base on the review, it looks like the MAMMOET PTC CRANE has better detail since it comes with BALLAST WEIGHTS and has its own LUFFING BOOM
@waynegoff7649 жыл бұрын
What would be the point?.
@CranesEtcTV9 жыл бұрын
+Wayne Goff The tip of the boom might be called the point, but it is not a technical term.
@squarerigtwo20578 жыл бұрын
The "tip" of the book is called the head!
@oscarddhh81836 жыл бұрын
I would love to have one but it would be 5 times the size of my room and 10 times the price of my house
@jeeepers20246 жыл бұрын
Sorry to hear about the design teams problems. Good luck but
@tractortom40112 жыл бұрын
How much, and dis
@vipyfz12 жыл бұрын
For the ones who asked. Is close to $2500 us dollars. But very nice model i dont have the room for it
Thread...??? wire comes in huge varieties....fishing line... piano wire.... hobby\craft is not really so lame as having to use crap. tell me that crane can lift... And hold 2kg !!!
@AAAyyyGGG7 жыл бұрын
PLEASE put the word MODEL in the title!
@CranesEtcTV7 жыл бұрын
Capitals do not suit the house style.
@AAAyyyGGG7 жыл бұрын
You don't have to put it in capitals, lower case would do. :-/ by the way, sorry to say "please" in capitals as well.
@VitaliyHTC4 жыл бұрын
Why you don't show full model view? Only parts??? Stupid way to show parts, but no whole model!
@CranesEtcTV4 жыл бұрын
Tall models are always a problem to show on a 16:9 video aspect ratio. Full model photo is in the Cranes Etc website review.
@VitaliyHTC4 жыл бұрын
@@CranesEtcTV yes, but you can play with environment, add some trucks, other objects, so it won't look empty space outside. For me it's hard to see such video :(
@CranesEtcTV4 жыл бұрын
@@VitaliyHTC Empty space is not the problem. Tall and thin means the full model looks far away on a video screen so you cannot see it well.
@tractortom40112 жыл бұрын
D it take a week to make lol
@barriewright28576 жыл бұрын
Brilliant, just shear fun.
@fcremas12 жыл бұрын
It's a good video and very nice model!!
@RCBandit259 жыл бұрын
That's one expansive crane.
@RizzaRazzu11 жыл бұрын
Awesome!
@robox916 жыл бұрын
For that price they could have put in some electric motors.
@duffy128512 жыл бұрын
thank you
@stevensarens77005 жыл бұрын
Impressive.
@djad5410 жыл бұрын
wow - over $2000/£1300.. That is pricey..
@alainbinacua819111 жыл бұрын
fantastic!
@djackchocoa33254 жыл бұрын
Can Easy learning :D haha very nice civil engineering.
@mOviestarthw1212 жыл бұрын
About 1.500 euros ;P
@larryhooverpedofilekillerc41774 жыл бұрын
I hope you have a great day the greatness in you is beautiful. Goodnight hello, good morning thank you for being wonderful thank you for being beautiful.
@gulabkeerio19304 жыл бұрын
good job
@smartcare56116 жыл бұрын
สวยงามมาก
@tomh2255 жыл бұрын
This dude must be rich he olds like a normal guy tho
@jonathanpenatrigal8 жыл бұрын
lo podías hacer en Español
@CranesEtcTV8 жыл бұрын
+Jonathan Trigal Garcia Utilizar los subtítulos y concesionarios traducer