WX Powder coating machine system setup and fluidising upgrade

[@joshwalters5875]

Great video! To the point quick! No nonsense babble about what machine you chose and why!

[@twobuddiescustoms]

Thank you so much for the kind words.

[@abderrahmantoumi3413]

Thanks a lot mate i got the same model and i couldnt figure out how to connect everything 🙏🙏 Thanks a lot from Algeria 🇩🇿.

[@timnorvill8551]

Thank You a thousand times, my friend ! Exactly what i needed. was able to powder coat, used a mapp gas torch .

[@Bevtherev8]

Thanks for taking the time to make this video, really helpful!! Well done.

[@patrickfarrell4751]

Looking at a similar machine and these tips were very helpful Thanks for taking the time to make this

[@twobuddiescustoms]

Thanks 🙏 , had to make one. When I got mine couldn’t find any info out there!!

[@imsurroundedbyidiocracy]

😅​@@twobuddiescustoms

[@goemansrene1406]

great video , is there any webside where I can download the operating manual for wx- 101 thanks 😀

[@jedgoz3]

Brother, can I use a portion of your video to create a product presentation video? It's only a few parts, not the entire video. I appreciate your time in advance. I couldn't find a direct way to contact you.

[@razclinton]

great video, we have the same system but i really could do with the small hopper but i can find them on ebay, would you be able to help?

[@twobuddiescustoms]

Hi here’s a link on eBay to check out. www.ebay.co.uk/itm/203351438768?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8V6-U5OgTq2&sssrc=2349624&ssuid=WhW51DwNS5u&var=&widget_ver=artemis&media=COPY

[@razclinton]

@@twobuddiescustoms thanks so much for that. 👍👍👍👍👍

[@Duffield_customs]

Great video thanks for the tips! I just ordered this gun so im doing as much research as i can to get ready for it. Could you send a link to where you got those smaller fluidizes? I didnt realize that one that it comes with is so big!

[@twobuddiescustoms]

I made the same mistake when I bought mine!!! Here’s a link on eBay they are £40 but from china www.ebay.co.uk/itm/203351438768?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8V6-U5OgTq2&sssrc=2349624&ssuid=WhW51DwNS5u&var=&widget_ver=artemis&media=COPY They are absolutely brilliant, not had any problems with mine!!

[@donny_darko]

Hello, thanks for the video ! Do you know if there is a way to deactivate completely the electric charging of the particles and still be able to inject powder ?

[@twobuddiescustoms]

Hi , I’m sorry I don’t! I’m sure there must be a way. Have you opened the gun to see how it works? If you know someone that’s good with circuits I’m sure they could figure out what activates it.

[@beataburger8065]

👍

[@EnduroDawg]

What psi do you set it at the watertrap /regulator

[@twobuddiescustoms]

Hi I set mine to 30psi at the water trap.

[@EnduroDawg]

Could you send link for hopper upgrade mate

[@twobuddiescustoms]

Hi here’s a link on eBay to check out. www.ebay.co.uk/itm/203351438768?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8V6-U5OgTq2&sssrc=2349624&ssuid=WhW51DwNS5u&var=&widget_ver=artemis&media=COPY hope this helps

[@DeepThings-nl3pc]

Price ??

[@johntyrone307]

Where did you buy the small hopper? Do you have a name/brand?

[@twobuddiescustoms]

Got it from eBay here’s a link www.ebay.co.uk/itm/203351438768?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8V6-U5OgTq2&sssrc=4429486&ssuid=WhW51DwNS5u&var=&widget_ver=artemis&media=COPY Hope this helps

[@johntyrone307]

@@twobuddiescustoms Thank you.

[@elgranjero4384]

Hello there if I set the kv 40 how much should I set the uA ?

[@twobuddiescustoms]

Hi buddy, on the wx101 there’s no adjustment for the uA it auto adjusts when you adjust the KV. It looks like it’s about 10uA on 40kv. If you set it to 50kv it starts to show 20uA so would assume it’s around the 10uA at 40kv Hope this helps

[@elgranjero4384]

@@twobuddiescustoms thanks a lot I bought the wx958 and I can adjust both Thats why I asked Thanks for your answer !

[@twobuddiescustoms]

@@elgranjero4384 no problem buddy

[@Mardy-old-Bstard]

Hi just wondered if this gun is any use. It looks the same as the vevor one. I've found it for £325 is that a good price?

[@twobuddiescustoms]

Hi yes this power coating gun works well, I’ve had mine for about a year and a half. Paid about £600 for it so yes £325 is a bargain!! Probably not the best for industrial use but absolutely perfect for a small workshop or home setup. I think there’s a few models out there that look almost the same, mine is the wx101 cannot fault it!

[@Mardy-old-Bstard]

@@twobuddiescustoms Thanks for that. I need it for steel gates so zinc primer then final coat. I might just get one and definitely upgrade to smaller hopper.

[@linzhang2727]

很棒的视频，我有一些相同的设备，你想试试吗

[@atiqlive]

We are looking this machine and also looking WD 100kv or 80kv machine manufacturer.. if you have any information then please send me.

[@twobuddiescustoms]

Sorry no information

[@DeepThings-nl3pc]

Coast क्या है

[@twobuddiescustoms]

Cost for what part?

[@punkyfresh505xoxo8]

I can’t get the air or rising air nobs to work at all. I’ve gotten the powder to flow but idk how to fix that problem.

[@twobuddiescustoms]

He adjuster knobs need to be pulled back to unlock, then you can adjust them.

[@punkyfresh505xoxo8]

@@twobuddiescustoms Ive pulled them back, pushed them in. Nothing ever happens. ☹️

[@twobuddiescustoms]

@@punkyfresh505xoxo8 are all the pipes connected correctly ?

[@punkyfresh505xoxo8]

@@twobuddiescustoms Ive powder coated a rim with it. The gages just don’t do anything

[@twobuddiescustoms]

@@punkyfresh505xoxo8 is it new or a used product? have you checked all the pipes connected correctly?

[@صالحهلال-ث5ذ]

Nambar you