Рет қаралды 3,590
Jak wymienić rolki pobierania i pasek separacji w ADF RICOH AFICIO MP6001 MP7001 MP8001 MP9001
Rolka B4772225 B477-2225
copy-expert.pl/...
Rolka A8592241 A859-2241
copy-expert.pl/...
Pasek A8061295 A806-1295
copy-expert.pl/...
1. Open the feed cover
2. Remove the snap fitting
3. Push the feed unit slowly to the left to disengage the shaft on the right, then lift it out.
4. Remove the feed unit
5. Remove the pick-up roller unit
6. Remove the bushings
7. Remove the pick-up roller
At re-assembly, make sure that the tab on the front guide plate is above the pick-up roller
8. Hold the feed belt holder by the left and right sides, then carefully pull it off the bushing. Do not let the springs fall.
9. Remove the feed belt
When re-assembling, set the pick-up roller springs first, then follow this procedure in reverse.