Xbox 360 E Controller Customization - Black and Steel grey paint

[@studiofr]

www.findandrestore.com/product-page/xbox-360e-customized-black-and-grey

[@zacharykamauf6429]

What kinda silver is this

[@femto8402]

You just makes me want to learn how to restore consoles, I can't stop watching your videos. Your work is truly amazing

[@alexsiguenza133]

Bro, I recommend that to clean the plastic pieces instead of struggling carving with the brush, it is better to use warm almost hot water and leave the pieces for about ten minutes, the water will make the dirt come off easily when carving

[@ArsyynalHTX]

Paint details? Type, color, etc... This is an awesome color scheme. Great work!

[@Trashpandaart71]

I subbed when you were around 8k subs. I'm going to enjoy watching you hit a million.

[@studiofr]

Thanks! 👍🏻👍🏻

[@samfrito]

You paint plastics with precision and confidence. I would envy it, but I'm just glad I can see how its done. Great work.

[@troytheaverage1256]

That one looks nice. Loved the 360 as well. I'm going to do one of my 360's soon.

[@saviolaoz7154]

Parabéns, Ficou Incrível! Sucesso Cara.

[@ДавидЯрминкеев-х9ю]

Nice work, man!

[@SkirlaHeder]

excellent as the command was.

[@elanlopes9482]

Great custom as aways, congratulations. One question: why after the sandpaper you don't apply a primer layer before the paint?

[@studiofr]

I always apply adhesion promoter before paint. It’s a special primer for plastic.

[@elanlopes9482]

@@studiofr I'll look for this special plastic primer here at Brazil. I want to make a custom on a Tectoy Brazilian Master System console. Thanks for the tip.

[@EdRuah]

Amazing job!!! Congrats!!!!

[@jonathanbarros3678]

Essa cor ficou muito top. Ficou muito bom mesmo Parabéns

[@eluv2401]

Any chance of a SEGA Dreamcast? That would be cool.

[@studiofr]

Sure 👍🏻

[@michaeljp926]

An Eddie Van Halen inspired console would be cool.

[@priyenpadayachee4542]

Do a ps4 in the colours of the ps1

[@juanhermosillo7322]

Sony made the DualShock 4 20th Anniversary Edition it is rare and not cheap, and I would love to see his recreation.

[@jackofalltrades417]

I'd watch that

[@veeravigneshveeramani2330]

Excellent painting

[@phantombreaker1731]

It would be nice if you could please tell us what kind of sandpaper and spray cans you use for these projects. Great videos!

[@studiofr]

Hi. Sure! 800 grit sandpaper. Montana pro cans, black matte, stainless steel and matte varnish.

[@phantombreaker1731]

@@studiofr Thanks a lot!

[@dongueddimi6294]

Wow that's make me want to do the same to my own joystick. nice work dude ❤️

[@unlined_sardine7426]

can you do Nintendo Wii restoration

[@SlashFergie]

Quedó increíble!! Solo una pregunta!! Aproximadamente cuanto tiempo dejas secar para que se endurezca bien la pintura??

[@Juliengoodgames]

the button is cool

[@llewellyn56]

great video...Awesome color

[@gustavomota8775]

Beautiful!!!!!

[@Joobral]

Man, it's bealtiful

[@paulocarkeijeiro9480]

Gostei. Restaure computadores também.

[@Joobral]

Exatamente

[@Jafezy_JD]

Where do you get those custom-coloured buttons?

[@tmakatsuki4211]

Yo soy de Chile está buenísimo el contenido

[@benjaminandradeosses5209]

Lo mismo digo

[@captaincommando2602]

I'll be waiting for that Nintendo Wii with Resident Evil theme.

[@CarlosHenrique-si1qc]

Until finally a video game control that the vibration motor is removable and not soldered directly on the plate, this makes it much easier when we need to clean or repair

[@studiofr]

Agree 👍🏻

[@dominicmartinez5502]

Can you tell me the link of the buttons for the controller? I not found ):

[@studiofr]

Hi, www.ebay.com/itm/332730520583

[@dominicmartinez5502]

@@studiofr Thanks for that! :D

[@ezequielsilva2709]

Ficou muito bom! 👍

[@pedrogustavosiqueiraneves9444]

How did you paint the buttons?????????????????

[@studiofr]

bought them like this on eBay

[@Brandonhung95]

Would love to see a PS3 Slimline customization.

[@jonathanzepeda4991]

Where did you get that brush? It seems good for washing the parts

[@studiofr]

Amazon

[@Saberbeatsvr]

Nice vid man looks awesome. 😊 What kind of spray paint do you use for this? I've been attempting to spray my og xbox v1.4 recently and I've not been having much luck. I'm using Montana gold but no matter what I do or how long I leave it everytime I apply a protective lacquer the paint separates it's really upsetting me now lol.

[@studiofr]

Adhesion promoter, montana pro paint, montana pro varnish

[@Saberbeatsvr]

@@studiofr awesome thanks man much appreciated. Spent the day stripping the shoddy job I did and got it half prepped again just need to grab some more paint. Keep up the good work. Shot you a sub too. 😉

[@Vindix007]

Awesome. What method do you use to make the Xbox logo on acrylic?

[@studiofr]

I have a Glowforge Plus 3d laser printer

[@AlonsoRedToxic]

Why don't you mention the products you used this time?

[@johnnymemory8280]

Beautiful

[@studiofr]

Thank you! Cheers!

[@orestispapadopoulos8407]

Really great job! It would be awesome if you also customized an original xbox.

[@_basho_7089]

New thumbsticks are $2 dude👌

[@wethey5599]

Cómo pintaste los botones?

[@studiofr]

Los compré asi en ebay

[@techfanerd]

O que vc passa por último para a pintura não sair devido o suor na mão?

[@studiofr]

Verniz acrilico

[@techfanerd]

@@studiofr Certo, A base d'agua né. Fosco, Brilhando, Semi Brilho?

[@techfanerd]

@@studiofr faço essas perguntas pq pintei o meu mas acho que o verniz fosco está soltando com o suor. Já na primeira jogada intensa.

[@Jubira]

Muito bom! Uma sugestão para video, caso consiga nintendo wii.

[@studiofr]

Boa! 👍🏻

[@connerharris326]

What’s the advantage of using the degreaser?

[@studiofr]

Hi, I use degreaser to deep clean the controller, to make sure there's no trace of grease on controller before painting job. But you can do the same with warm water and dish soap. 👍🏻

[@connerharris326]

Thank you and what grip do you use to sand it down?

[@studiofr]

400, 800 and 1000 grit

[@jamesduran3804]

Love it.

[@lucindamorris5653]

I like the Xbox 360 E my auntie gave me her Xbox 360 Slim because she is staying at my house

[@benjaminandradeosses5209]

Yeah

[@drewmorama]

Grey rubber mushrooms and chrome transforming d-pad it's really needs to be)

[@lc7ineo]

When did he painted the buttons ?

[@studiofr]

I didn't. I bought those black 👍🏻

[@JIM-cx7up]

Very nice 👍✌️

[@MrZoozi]

Nice work)

[@filippocaimmi5982]

doesn't the paint brush away after some time?

[@studiofr]

I always apply a hard matte clear coat to protect the paint.

[@TiagoFerreira_]

Very good! ✌

[@phillipemagalhaed3099]

Não esperava menos de você, o trabalho ficou impecável, parabéns

[@Juliengoodgames]

nice job and color =)

[@Jonas-eg9jd]

Qual tipo de tinta que você usa para pintar o controle?

[@studiofr]

Usei uma tinta acrilica fosca da marca Montana pro.

[@jamysonluilton]

Where do you get those ABXY buttons? Or Did you paint it too ?

[@marcodalsin]

lindo trabalho!

[@TRUministries]

What are you using after you sand to wipe the controller down?

[@studiofr]

Isopropyl alcohol

[@herc10]

Where did you found those face buttons?

[@mynameisjeff1135]

Where have you ordered the buttons from?

[@AnarickTheDevil]

Did you use any kind of clear coat? If not that paint is going to rub off on your hands.

[@SUPERKLIKACZpl]

Hey Find & Restore ! Maybe SEGA Mega Drive 🎮 plus Streets of Rage 👊 cooperation Theme next time? 🤔 Ps. Great job as always Sir! ✌️ 🚀

[@bassam1985]

how did you paint the buttons?

[@studiofr]

I bought those in black.

[@martinfreeman5058]

Hi , could you please restore and mod a Ps4 controller ?

[@Alexandre92425]

a question if i buy these over there colored xbox one buttons will it fit on xbox 360 ? why here in Brazil they only have to sell these Xbox one buttons!!!!!

[@sultanhasanudin14]

Hi, try to restore Nintendo Ds Lite, 3ds old, 3ds Xl

[@ChazzyChazzGaming]

I don't know why, but everytime I see someone washing dishes with soap but there's no bubbles is kind of piss me off 😂😂😂

[@FLipSide5254]

it's called budget lol.

[@AnarickTheDevil]

The bubbles you see with most soaps you buy at the store are from foaming agents they put in them, They have no real affect on the soaps ability to clean/kill germs. I know this because my grandmother makes her own soaps.

[@adrthegreatball4596]

My toxic trait is thinking if I did this, it would look just as good.

[@williamrichardassang5947]

you are the best

[@cristianpaul5220]

Hey, where or how did you make those control keys, do I want them too?

[@studiofr]

Bought those on ebay

[@zkorpthekorp]

What grit sandpaper did you use the sand down the controller?

[@studiofr]

400 grit

[@Kyle_92]

I prefer the videos like this without the backing music

[@juanmanuelosorio4957]

You can tell me that screws are the ones that are in the cross, I just can't, see, wait and see my comment.

[@techfanerd]

Qual lixa usada?

[@studiofr]

400 e 800

[@ahsaniabdan]

Stick ps2 restoration video please

[@ahsaniabdan]

A stick, this video is concole

[@studiofr]

Sure, next week the controller will be ready. 👍🏻

[@ahsaniabdan]

Okay, i will wait, i like this channel

[@studiofr]

Thanks! 👍🏻👍🏻

[@ChrisCovers78]

I don’t think that’s the controller that originally came with the console. It should have the “transforming” D-pad.

[@reballtv]

Amazing 👍

[@eryavrilio3751]

Custom gaming laptop would be awesome 😁👍🏼

[@Smg9999-i6l]

My Xbox 360 start playing 📀 dvds again

[@mohammedalaleeli6645]

i like it so much

[@lucasmarques5873]

Caramba queria fazer isso com o meu slim :/

[@DARKSIDEXIII]

Are people sending you these consoles to fix up or are you just finding them on ebay or somewhere real cheap?

[@studiofr]

Ebay

[@thetigerman]

How durable is the paint does it peel or chip off?

[@studiofr]

I always use a hard clear coat to protect the paint

[@johnchitwood3328]

I know you gift of fixing everything that you put your hands my Super Nintendo need new outer case it work but the plastic switch is broken but power switch work I have to turn power switch it

[@Vista_not_the_OS]

What grit did you use for the controller's surface?

[@gabemorris8319]

What kind of paints do you use when you do these projects?

[@BluesfireTV]

I've always worried that a spray painted controller would feel sticky/tacky, do they not?

[@studiofr]

Not at all! 👍🏻

[@BluesfireTV]

@@studiofr Thanks for the reply! Do you use a clear coat at all?

[@lildiamond69]

I wish to see a n64 added to the collection yk Maybe soon?

[@GYLLEWAY]

How u make the buttons

[@studiofr]

Ebay 👍🏻

[@bryanlopez5151]

@@studiofr How do I look for them?

[@andrewtarantcasischigame2472]

Ma con la 360 slim hai fatto il video comunque eccezionale

[@Saiky-0-8]

Vuelve por favor 😔

[@EEVOL]

What brand/type of paint do you use?

[@studiofr]

Montana pro matte

[@EEVOL]

@@studiofr thank you!! I love your videos so much I am going to do something similar to this with some xbox(original) controllers that I don't use because they are ugly lol.

[@josephtheboi_2410]

Why didn't you just buy a gray controller instead?

[@mortysmith7254]

Nice intro

[@pitu_429]

Make arcade tekken 4 ps2 mod pls it will be so cool and nice i mean with arcade stick and little screen

[@benjaminandradeosses5209]

Yeah

[@mota7506]

Waaaaaait a minute those weren't the original buttons

[@cherifghazawy8006]

Custom the xbox360 slim

[@victorplayeroficial347]

Top