I've now watched everything you have done. My hats off to you, sir. Great job on everything.
@RestorationRelaxation3 жыл бұрын
Thank you, friend!
@HeadfirstHumanity8 ай бұрын
That spring replacement idea never occurred to me before, it's so simple and yet I've never thought of it! That would have come in handy so many times in the past. Thanks for sharing!
@t683 жыл бұрын
1/10 tell me how hard it is to rgh an Xbox do u think I should buy one or do it myslef
@RestorationRelaxation3 жыл бұрын
How much experience do you have with soldering and tinkering around with computers?
@johnadmire98873 жыл бұрын
The spring trick WOW! Also, do you thing your wrists would like it if you bought a power screwdriver?
@RestorationRelaxation3 жыл бұрын
I’ve thought about it! I feel like I’d be more likely to strip screw heads, although I’ve never tried one of the handheld ones - are they good?
@yodead3693 жыл бұрын
@@RestorationRelaxation do it! Save time, save money!!
@gl8833 жыл бұрын
That was some fine work there! I've been looking for smaller tech repair channels to watch for a while now, though all I seem to find 80% of the time is either clickbait or the person has no idea what they are doing. So im glad I was able to find your channel. Keep up the great work!
@RestorationRelaxation3 жыл бұрын
Thank you for the kind words!
@TD-32697 күн бұрын
Great job! Very thorough. Spring tip was exactly what I was looking for. Drill bit size would have been a plus. Thanks for the video!
@xAKIMBOCURLYx3 жыл бұрын
Amazing work with that spring. You might also consider giving it a fine grit sand and some spray paint to fix up the appearance
@RestorationRelaxation3 жыл бұрын
Thank you! I only wish I could have gotten the USB port sorted, but it was honestly impossible to fix it, the way it broke
@ralph82373 жыл бұрын
"dirtiest one yet" ... yeah, you mean, more to come? This isn't that bad, I've seen much more gross consoles and computers in the past ;-)?
@RestorationRelaxation3 жыл бұрын
A while back I unfortunately opened an Xbox FULL of roaches. Too bad I didn’t have a channel then
@Krait-sd7sh3 жыл бұрын
I once fixed a 360 elite too and it’s inside was coated in dust it made my allergies bad
@RestorationRelaxation3 жыл бұрын
@@Krait-sd7sh one of the slims I fixed was so dusty, I had to wear an N95 to breathe without gagging
@SuperHitman552 жыл бұрын
Thank you for restoring this beauty of a console!
@patrickmurphy94702 жыл бұрын
I just picked up an Elite with the Kronos chip for $10 and Goodwill. This video will help me restore this beauty. Thanks.
@santiagotororestrepo6858 Жыл бұрын
Hola
@nazarenocarrizo77762 жыл бұрын
Good channel. I follow you from argentina.
@RestorationRelaxation2 жыл бұрын
Thank you!
@FF2007Vyonder2 ай бұрын
8:04 That could have damaged the motherboard of the Xbox 360.
@user-yk1cw8im4h2 жыл бұрын
does the disk tray closes fine after the cleaning? I have it in the same state wondering if this could fix it.
@RestorationRelaxation2 жыл бұрын
Works perfectly
@user-yk1cw8im4h2 жыл бұрын
@@RestorationRelaxation cool, there's so much problems that no one really know the answer to with that generation of consoles.
@martin16492 ай бұрын
can you use some sort of grease on the fan bearings to quieten it down ?
@nevter27123 жыл бұрын
Man you are soooo underrated, you deserve more
@RestorationRelaxation3 жыл бұрын
Thank you! 🥰
@yodead3692 жыл бұрын
Yes he does! The patients, the temperament to sit there and move the camera and make all these positions happen! Also not to mention that he has a great camera, unlike most mediocre KZbin channels.
@muhammadharitsdaud14192 жыл бұрын
My favorite motherboard jasper because the durability is guaranteed
@muhammadharitsdaud14192 жыл бұрын
I've been using jasper since 2010 till now and still working fine
@RestorationRelaxation2 жыл бұрын
I used this board in my latest video if you haven’t seen it yet - I love it! I just need a quieter fan
@hanneman45095 ай бұрын
4:46 Brushless fan 5:15 Proceeds to clean fan with a brush. Fight the system. 🤘
@powpandapokung88899 Жыл бұрын
you havent even seen mine i bought it second hand and its rusting away with cockroaches inside
@lucasrem7 ай бұрын
why you need 360 now ? museum ?
@rtas2 жыл бұрын
Lovely relaxing teardown and cleanup, enjoyed watching and may be using this as a semi-cleanup guide in the future when I move to RGH the elite that just came in the mail. Thanks!
The way you cut your videos looks great. I should probably implement something like that in my videos to make them not so lengthy. Great job with that spring by the way! DIY is always best.
@RestorationRelaxation3 жыл бұрын
Thank you so much!
@RNSTOTTE3 жыл бұрын
I saw a few years ago, a guy that instead of a spring for the usb cover, he cut a small piece of a flexometer and uses as spring. I did and ita alittle bit harder to open but now it closes.
@RestorationRelaxation3 жыл бұрын
The USB cover was very frustrating. The plastic piece that held the spring in place was broken, and the whole mechanism was just a mess. I probably spent at least two or three hours trying to get it fixed.
@bertosudu950611 ай бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@owaisrafiq68102 ай бұрын
is it not risky using a brush on the motherboard?
@RestorationRelaxation2 ай бұрын
@@owaisrafiq6810 nah
@itailevin2 жыл бұрын
Love the content, I am sure you will get to 10k subs very soon!
@RestorationRelaxation2 жыл бұрын
Maybe someday! Thank you!!
@balrogxi3 жыл бұрын
I like your videos
@RestorationRelaxation3 жыл бұрын
Thank you very much!
@74bobby3 жыл бұрын
Great Job. I Like seeing your channel Grow...
@RestorationRelaxation3 жыл бұрын
Thank you!
@CliffNark7 ай бұрын
Best looking console ever made, got myself a mint 2010 serviced Falcon and it is hard not to look at even when playing games, good vid boss
@Pandabaerchen882 жыл бұрын
80% from the 360 fat´s i have made with rgh1.2. Look´s like this console. It´s normal !
@classicgarage9892 жыл бұрын
Really thanks for spring.
@RestorationRelaxation2 жыл бұрын
Glad it helped!
@Dark_Jaguar Жыл бұрын
Thank you for this video. I found an oddity, a Jasper 1 board with a Kronos board from July 2009, and I'm using this guide to help me safely take apart and clean this.
@Thunderpuddle10 ай бұрын
How you don't gag while cleaning this, I have no idea. Made of strong stuff!
@jhonsmith71973 жыл бұрын
Hey,i'm from Morrocco and i like to move working in usa, can you help me to find a job over there plz?
@Peepo_Hi3 жыл бұрын
Wow, that's a lot of Thermal Paste.
@RestorationRelaxation3 жыл бұрын
The inevitable thermal paste comment :)
@mikehearn4231 Жыл бұрын
i threw a coolrunner rev c in mine with the Xenon cpu heatsink with arctic mx4👌🏻 she runs great!
@youtube_yolo42402 жыл бұрын
I have lost my power cable on the same xbox, any idea of where to get one? I want to use it again so bad
@cuivie83422 жыл бұрын
I have a 2007 model it still works I just have to change the shell
@theprimestonecollection295 Жыл бұрын
Where does the Falcon fit in as a version of the console? .5 model?
@codycommentsonvideos57552 жыл бұрын
Some of the metal on my Xbox 360 Elite is bent so i can’t close it all the way
@ruffrider26263 жыл бұрын
Good job. Keep up the content.
@RestorationRelaxation3 жыл бұрын
Thank you!
@Anytyme06 Жыл бұрын
What kind of screw driver is used at 2:45?
@XRelays2 жыл бұрын
4:54: are those maggots🤢 good job on fixing this console, i've noticed that almost every jasper/jasper v2 has the exact same issues as yours (extremely dusty or dead disc drive), yet they still work, but i've seen Xenon and Zephyrs have RROD or not even turn on that have no dust or very little use. really shows how Microsoft improved the 360 as the years went by
@jayc.landgraf682811 ай бұрын
The issue wasn't even heat in the first place. Yes, it was heat-related, but it had absolutely nothing to do with the peak temperature, but rather the fact that it would heat up and cool down when the console was turned on or off respectively. The GPU's die was connected to the substrate/interposer through a bunch of microscopic solder bumps (they're SIGNIFICANTLY smaller than the solder balls on the BGA itself) that are usually protected against issues with an underfill underneath the die. However, ATI (who made the chips for the 360) used the wrong type of underfill that would fail and cause the GPU to stop working. A lot of people have tried to "fix" the issue by doing reballs/reflows, however, these were only temporary and the issue would usually come back within 2-3 months. The late-Falcons/Opus, all Jasper V1s, and especially the Jasper V2s had fixed versions of the GPU that had the correct underfill and therefore wouldn't fail. Some Xenons that were sent in after a certain period of time would also get a fixed GPU known as the 80nm Elpis.
@PEACEWALKER1992 Жыл бұрын
Thanks for showing :)
@Tankpookas Жыл бұрын
Broke the top part of my console doing this 👍
@RestorationRelaxation Жыл бұрын
RIP
@rob8312 жыл бұрын
"Kronos" doesn't exist, that's just a myth.
@RestorationRelaxation2 жыл бұрын
Nope. It’s a v2 Jasper.
@rob8312 жыл бұрын
@@RestorationRelaxation Yes, there's two models of jaspers, just the term "kronos" doesn't exist. It's a myth. The original free60 team, which had dissected every 360 motherboard, and many other experts, has stated there really is no difference between the two.
@brendan_waugh10 ай бұрын
It’s printed on the chip. I’ve just stripped and cleaned a console.
@rob83110 ай бұрын
@@brendan_waugh No such thing as a Jasper "kronos".
@brendan_waugh10 ай бұрын
@@rob831 ok, you go off what you read, I’ll go off mine.
@seanim5721 Жыл бұрын
Hey FYI that not an elite
@RestorationRelaxation Жыл бұрын
How so?
@seanim5721 Жыл бұрын
@@RestorationRelaxation an elite says so on the back and the disk drive is different that's just a normal Xbox 360 fat jasper