Xbox 360 Kinect 3D scanning

In this video I take you through how to scan a person using the Xbox 360 Kinect.
www.thingivers...
Scanning Software: skanect.occipi...
Remote desktop software: www.tightvnc.c...
STL: www.thingivers...
OR: cults3d.com/en...

[@andreicaeduard]

Really nice video!! Could you also please do a tutorial on how to assemble the turn table

[@ceejay_drb]

Can you please make a video guide on how to assemble the turntable?

[@GoranMilici]

Well this convinced me to buy the kinect. Used ones are like 25 dollars in Amazon. I have a bunch of 3d printers from a voron 2.4, a prusa mk3s bear upgrade, a Taz 5 ratrig vcast idex widebody and a prusa mini. All top of the line hardware eu in y y yy

[@Make-it-work]

Awesome I'm sure you will enjoy it. Those are some beautiful printers. I have a mk3s and Would love a voron but not in the budget yet

[@gothmaniow]

what a cool vid .. i especially like your diy turntable :O ..are the plans for that online anywhere ??

[@Make-it-work]

My video editing skills are very slow but due to the interest I do plan on making a video on it. Here are the STL files that I used in the video but they could definitely use some modification www.thingiverse.com/thing:4891235

[@justintreehouse]

Awesome video. Very informative! Did you make the next video about bringing your scans in to blender? I couldn't find it in your channel. Thanks!

[@A6eek]

kzbin.info/www/bejne/q2mll5l_pKd4pcU

[@blastoffaccess]

Can you use multiple 360 kinect

[@MidnightMarrow]

I've been trying to see the max detail one can achieve with a kinect v1 and most of what I see isn't so great. I dunno if you know for sure or not but would a better system yield more accurate scans while also maintaining the faster speeds or is it the same quality just quicker? I definitely always see cheap laptops and the like being used to scan so I've been hopeful a 12 core system with 32 gigs of ram and a RTX 3080 might be able to process higher quality meshes?

[@Make-it-work]

The detail will always be the same. But it makes a huge difference if the system is not powerful enough to hold the 30 FPS you lose tracking so fast it's night and day difference 15 FPS to 30. Also as of last time I used it you cannot use a 20 or 30 series graphics card my 3090 is not supported at all you have to go back to the GTX card or it will process using your CPU instead. So every time I go to 3D scan with my desktop I have to pull out my 3090 and reinsert my 1070 TI =(

[@Bpboshoff]

Thank you for sharing the Kinect handle files, I'm getting one printed this weekend. I do appreciate it. And the idea of using your phone as a PC screen is very clever. Thanks again.

[@Make-it-work]

Thanks really glad to hear you found this video useful

[@Bpboshoff]

@@Make-it-work I just got my handle and built my sensor, thank you so much again. It looks really good. The holes for the zip ties got blocked because the software wanted support material there so I glued the Kinect to the handle. Works great and I'm super excited to get scanning. Reddit post of it all assembled www.reddit.com/r/3DScanning/comments/occxm0/3d_scanner_i_put_together_with_a_kinect_v1/?

[@Make-it-work]

@@Bpboshoff thank you for the pictures and the updates it's really exciting to see someone else making one of my projects

[@Blackinterceptor999]

@@Make-it-work Apparently according to Skanect they do not support the Kinect anymore...They now have some bundle that's $500 bucks.....It's not so affordable for the everyday person anymore....Too bad they killed it off, and their excuse is kind of a lame one...when we can clearly see it worked for you in this video just fine.

[@medicluigi]

@@Blackinterceptor999 where did you see the info that they dropped support for the kinect?

[@bobklepel1698]

That’s amazing, well done! You can sure handle that technology- you have done that a time or two!

[@kirstinklepel9029]

No kidding😆

[@kamransaeed887]

Hi. Kindly tell me which version of kinect is used. As I searched and came to know that all kinect sensor versions not work as 3d scanner so i am confused about which version should I buy. Thank you.

[@pabloe.castillovargas8248]

me encanto esto como hiciste la base giratoria , seria genial poder construir una si saludos desde chile

[@Instant_Nerf]

Would be great if they added iPhone support since it’s so hard to find these Kinect 360. The iPhones have depth camera and LiDAR.

[@fabiangodde6624]

Zu Beginn stand oben in der Ecke das die CPU nicht ausreicht. Ich habe das gleiche Problem. Am Ende stand es bei dir nicht mehr. Hast du den Computer gewechselt? Ich hoffe es klappt mit meinem Intel Core i5

[@joshchalmers6250]

Hey, excellent tutorial. I can't believe what you can do with a 3D printer.

[@downwash17]

Hi would you be able to tell me the dimensions of the diameter of the top round timber and of the square bottom. Timber please.

[@ebs6286]

It is better than buy expensive scanner

[@clippedoutofcontext5807]

just realised you never did the next video :(

[@nickyroime]

I really need your tutorial of your turntable please

[@martymcfly4038]

Mate this video is amazing! Didn't know the difference between pro and free,,, been using free for ages now

[@celticverse1381]

for a turn table whats the best speed for skanect to render im seeing on amazon they have 30 sec rotation with a 7 inch platform

[@Make-it-work]

The slower the better.(if you go too fast for the FPS It will lose tracking And the slower you go, the more detail you get It caps out at 30 FPS With the best hardware and it doesn't work with RTX cards so a 1080TI is the most powerful graphics card it works with Or you're going to be limited to CPU) I've never timed the rotation speed. But. I'm going about as fast as I can in the video. So make sure it's spinning slower than what you see in the video.(ignore the animated part That's not necessarily accurate speed, that's just for demonstration)

[@rezaemami1]

Hi. Can an xbox One kinect scan better? Doest it give more details?

[@Make-it-work]

In my research people preferred the 360 connect, But I believe a lot of that has to do with the fact that there The best software is only available for the 360 though you do have to pay for it whereas the Xbox One has available free software, but it's pretty junky. and does not work with the software for the 360.

[@rezaemami1]

@@Make-it-work I got the professional version of skanect after watching your video. the result is great. Thanks for your video. I am now struggling with using a phone as you do. It makes the job far easier, but I don't have the necessary accessories.

[@Make-it-work]

​@@rezaemami1 Glad to hear it's an amazing technology. I'm sure you'll love it. as to the phone thing, it's really quite simple All you need to do is grab some remote desktop software /app The One I show in the video is my favorite, but there are a lot of other ones. I have tried some of them and they also work good And as to mounting the phone to the back of the scan act if you buy a cheap case for your phone from the dollar store, you could hot glue it, or you could temporarily just tape or zip tie Your phone to it

[@anthonydematteo1114]

Do you have the part# of the handle you show in your video for holding the Kinect cam? Trying to find it.

[@Make-it-work]

www.thingiverse.com/thing:4538612

[@gaster4565]

i cant find the windows download

[@Make-it-work]

It does appear to be missing from what I can see, but I tried reaching out to their support and they got back to me the next business day and they put the links in the email for me to download again.

[@freezedbrain8767]

Which Skanect version did you use?

[@boimesa8190]

ls there a free alternative to skanect?

[@Allanusmonostat]

Would this work for the Xbox one Kinect?

[@Make-it-work]

My understanding is this software does not work with that connect, but there is other software that does not sure as to its features though. ( when I first looked into it my understanding was the 360 did a better job but the Xbox One had free software from Microsoft ) kzbin.info/www/bejne/mpKmmpiFhrpmqaM

[@HunterTinsley]

Smart move on the turn table!

[@luiskantek]

Hi there, greetings from a Brazil. How you connect the Kinect onto your phone?

[@Make-it-work]

I am not I am just using a remote desktop software so the phone is controlling the computer that's controlling it

[@luiskantek]

Great! And... You printed the model from this video? Does it have good details?

[@kirstinklepel9029]

Very well explained! Thanks

[@amandaarcanjo530]

4:02

[@gelopsycho]

thanks man!!! no more follow up video?! haha stay safe! thanks again! :D

[@Make-it-work]

Yeah sorry it's all filmed but editing is not my strong suit and since there didn't seem to be much interest I haven't been eager to get started since I wouldn't be surprised if it took me 40 plus hours to edit

[@gelopsycho]

@@Make-it-work awwww maann! haha stay safe brotha! thanks again. :)

[@Yuri-Nate]

Thank you for the awesome vid

[@Yuri-Nate]

Very helpful

[@bigprojects2560]

Got a question, what gear ratio are you using on your turntable?

[@Make-it-work]

Not sure on how to do the math on that but it wasn't quite enough here you can calculate it yourself www.thingiverse.com/thing:4891235

[@edensanhardenberg4933]

You have a video for the turntable?

[@Make-it-work]

Not yet but I do plan on making one

[@jonathanendaniellevanes4371]

How did you create the turntable with the drill?

[@Make-it-work]

I used the turntable from an old living room chair. And then the drill is connected to a gear reduction box I created that reduces the speed of the drill down two a shaft that's wrapped in rubber from a bicycle tire so it has a nice friction surface against the round wood turntable but so it keeps a solid connection the plastic piece is on sliders and I have two bungie's pulling it towards the turntable

[@jonathanendaniellevanes4371]

@@Make-it-work Do you have some stl files or links which you 3d printed? Or can you send me an email?

[@jonathanendaniellevanes4371]

@@Make-it-work I sent a email to the email adres of the channel, but it's not working anymore?

[@Make-it-work]

sorry I didn't realize that email address was still on there and yes I did make some STL files but I was never fully happy with the design so I never published it but I can send you some of the files but they probably need tweaking. email: [e-mail]

[@Make-it-work]

Here is the file www.thingiverse.com/thing:4891235

[@Tukn]

Wow, That was impressive! How long does it take to get full 3d model? From scanning the object to get the stl ready to print?

[@Make-it-work]

that totally depends on how successful your initial scan was I have had really good scans that I can export and import straight into a slicer and it works and I have had other ones That can take up to 8 hours of editing in blender to get right I plan to eventually do a video on the process

[@LeadDennis]

Where is the follow up video?

[@Make-it-work]

It's probably gonna take me 50 hours to edit so I keep intending to finish it

[@LeadDennis]

@@Make-it-work I can relate, no pressure.

[@boimesa8190]

lady got back btw