Xbox 360 Power Brick to 12V for car amplifier

XBOX 360 power supply for car audio or any other 12v needs.
Wire colour code:
Yellow: 12 positive
Black: ground
Red: 5v
Blue: signal to activate 12V
This video is for entertainment purpose only. The uploader assumes no responsibility or liability for any errors or omissions in the content.

[@RajunCajun1]

Thank you for sharing this! I believe I needed this because I hook my amplifier up to my home stereo and when I turn off the power the amplifier makes the speaker pop!

[@MrMaster2262]

I did similar years ago but linked the red and blue wires together without an on/off switch... i used a paperclip to loop the sub 12v connection with the sub remote connection and used the plug mains switch to turn it on/off... worked just great 😉👍

[@alfonzojohnson2126]

Thanks for creating this video.

[@alaskadriftking]

Thank you for this!

[@loganplaysyt5522]

thanks man

[@RajunCajun1]

I hope this is the solution for speaker pop when I disconnect the power from the amplifier in my home stereo with my car amplifier!

[@RajunCajun1]

I used an X1 power block

[@HermanOtto-wr2nn]

Witam z Polski pomogłeś jak uruchomić zasilacz oczywiście leci łapka w górę miłego dnia

[@manolorodriguez3905]

It works but not powerful enough for my 1100 watts subwoofers , it cuts off when increased volume.

[@justget0844]

So, should I just run a receiver w a power converter to my amp instead?

[@RyanGoad-ef7zy]

Where's the white wire go to??

[@bmars9101]

Does not work at all my amp runs 75 amp does not even turn on the amp

[@jamesgonzalez1906]

Any one no how to connect receiver radio to amp I already got amp Speakers hooked up thanks

[@prestanwebster5711]

What is the white wire

[@antonionolasco1658]

It’s the remote wire which is used to turn on the amplifier when the car stereo in your car turns on but in this case you wouldn’t have a car stereo so he wires current from the positive into the remote wire acting as a signal from the car stereo to turn on the amplifier

[@NFL.Off.Brand.Productions]

its red the light?

[@skiddermadnessnewzealand2148]

Yea i have a red light on mine and it still works

[@skiddermadnessnewzealand2148]

Not all of them are green

[@NFL.Off.Brand.Productions]

@@skiddermadnessnewzealand2148 its supposed to be green and its not i have to buy a new one😭

[@NFL.Off.Brand.Productions]

@@skiddermadnessnewzealand2148 bc it dont work for me

[@pmoneysign3416]

How do you do the switch 😩😩😩

[@Law_Abiding_Citizen_ok]

With your finger!😂

[@Senpai_J0N]

Lol @ Paul It looks like the standby(bluewire) is connected to outside prong and 12v (redwire) is connected to middle prong