XFLY Eagle Twin 40mm RC EDF jet Wing with Gyro EPO 1019mm (Red/White) Unboxing

Рет қаралды 7,635

Petrincic Bros RC

Күн бұрын

Пікірлер: 47

@ZIGZAGBureauofInvestigation 11 ай бұрын

The Only Way 2 FLY is From the Ground ! I Salute your Wild & Crazy Missions

@AerialRCFun 11 ай бұрын

Great idea about the German paint scheme as I also saw some old photos of their experimental designs with engines on wingtips. Thought about adding wheels myself as it would be pretty easy without adding much weight or drag but decided against it because I imagined it could suck in debris with the intakes so close to the ground. I have some videos of my initial flights, this thing is great!!!

@scable-eq7bp 11 ай бұрын

This is a really cool plane but very difficult to fly. Because it has thrust vectoring plus elevon control it has a bad habit of tip stalling under reduced throttle. It seems like when the edf's are in the thrust vectoring mode they are over powering the elevons in the turns. Captain Drone did a review with this plane and he was having major issues with it, it crashed several times while making a turn. We suggested reducing the throws on the elevons and add more expo and also reducing the amount of rpm going to each edf while in thrust vectoring mode. He tried all that and said it flew better but what he ended up doing was disconnecting the thrust vectoring and just control it via the elevons and stated it's a joy to fly now....

@AerialRCFun 11 ай бұрын

I watched those videos and it's unfortunate he had troubles but my experience was quite different. I have flown wings before this one. I reviewed several YT videos before flying for tips and CG is critical as well as launching in the correct flight mode. Battery should be as far forward as you can get it, generally speaking. Insure differential thrust is not reversed, when yawed, the lagging wings motor should speed up. Launch in locked (self-level) mode and it's a breeze - never had a problem with launching this in the least. Warning! The only problem I had (which is also shown by another guys YT video named Dr. Cho) was when landing one needs to cut the power because she really wants to glide. Flies fine power off but what happened was when I was getting close to touch down I added a bit of throttle to adjust for desired touch down point and was about 4 feet off the ground and the craft immediately yawed out of control. I think it has to do with throttles re-initializing after a long flat glide with power completely off. The cure is simple - when landing I now just make sure not to re-engage throttle and just committ to land. No further problems and I love this wing, the dual EDF's spaced far apart give an interesting sound effect and this model is tons of fun!!! Oh yes, be sure to go with higher expo and rates than you normally would because she can be pretty sensitive otherwise!!! There are videos on my channel showing launch, some flights and my loss of control at the landing just like happened to Dr. Cho in one of his videos.

@mikeupton5406 10 ай бұрын

Oooohh! Thats a sexy Milwaukee tool station.

@markdemeres9598 3 ай бұрын

Hello my brothers from another mother… I have this wing too, “What is Dis?” A Horton hears a what?😜 Cool wing not like others by far… Big RC ❤from Virginia!

@JohnHill-jm7tm 11 ай бұрын

Look at Dis 🥰. Good looking plane 👍. Looking forward to seeing you flying the maiden 😜. Do love me some Brothers and Alina ✈️🧔💝💝💝

@russcole5685 11 ай бұрын

You'll be very happy with the M18 chainsaw, and those 12Amp batteries are the bees knees for the high drain tools. I've got the M18 magnet base drill, and its fantastic for onsight jobs, and within the workshop. No power cords dragging everywhere

@JakeBullit123 11 ай бұрын

I have this model. I fly with 4s 2600 all the way forward. Let it get some speed up before turning and keep a bit of speed up when landing. Flat spins are crazy with differential thrust. Enjoy.

@leecollins8051 11 ай бұрын

Captain blaz CUT CUT .....I love this so much ❤️...I love the flying wing ...but much more I love you two guys ...so funny always.... Can't wait to see the maiden ... Hope your both well ....lee over in 🇬🇧

@davidrivero7943 11 ай бұрын

That is beautiful , muchachos !! Love the Wing type, LOS for life & eyes would not keep up, thou. Helicopters are Fun.

@alangentry6295 11 ай бұрын

Very nice flying wing can't wait to see this on the runway thanks for the review

@frankienv3906 11 ай бұрын

those wing tip motors look like very powerful drone motors. I scratch built a small 27 inch airplane and used a drone motor and its a very fast plane !

@bmosley4444 11 ай бұрын

Agree about the Horton, super awesome cool

@kevimkaschl9963 11 ай бұрын

that's awesome Robert u are going to have a blast with that bird lol.

@ironmover5800 11 ай бұрын

Those wings look fun , I may have to get one

@PhilipCockram 11 ай бұрын

Best of luck of with guys . SALUTE !

@vernonlloyd1388 11 ай бұрын

Oh dear I are waiting to see this wing fly 😮

@reckemroysrc3764 11 ай бұрын

Very cool and set up really nice. Can't wait to see the maiden 😊

@HelixRsix 11 ай бұрын

Interesting plane lads it definitely has the B2s about it will be a interesting flight I reckon

@migalito1955 11 ай бұрын

Interesting plane. I'll remember it come spring. I like HobbyKing too & its one of their planes.

@williesmith1530 11 ай бұрын

I'm NOT a big fan flying wings but I can't wait till the MAIDEN FLIGHT video to see this thing fly good luck.

@gazza4230 11 ай бұрын

I got those edf’s in my f22 from xfly Robert it’s all built now and when I get out I will post vid on my channel those edf’s are diddy though lol big salute 🫡 Gary 🇬🇧

@8poundquark 11 ай бұрын

Almost a Horten😊. I hope you have good luck. It's wonderbar🎉

@russcoaus2043 11 ай бұрын

Gentleman fantastic channel great stuff. 💯👌

@TastierBackInThe80s 11 ай бұрын

Reminds me of the Horten flying wing. Curious to see how it flies.

@williamrobinson7435 11 ай бұрын

A really exciting flying wing this. I bet it's pretty difficult to fly though, even with the giro enabled. I like the fact that it's got a nice long carbon spar, this looks like the kind of bird that might take the odd tumble. Big salute as ever from London. ⭐👍

@Workerbee-zy5nx 11 ай бұрын

This sexy air plane is a "Hot Wing" maybe with buffalo sauce and ranch dip.🙂 good luck on zie maiden flight. 🎉

@MammothPaige 11 ай бұрын

Good luck

@bigbolloxs36 11 ай бұрын

flew mine did a flat spin and the esc or gyro stopped crashed now edf in my air boat 😂

@dizzychizzy1 11 ай бұрын

I could buy that for sure.👍

@DavidKozinski 11 ай бұрын

Very cool design! Can't wait to see her fly. Very Sexy plane!

@reworkfpv7359 11 ай бұрын

You should fly the wing FPV style

@stephenrout9025 11 ай бұрын

have you looked at this Plug and Play (PNP) | OMP Hobby 60" Edge 540

@bagoistvan3182 11 ай бұрын

0:24 ...🍺🍺🍺🍺🍺😁😁😁

@stephenrout9025 11 ай бұрын

make sure you turn giro on its a hand full with out it

@stephenrout9025 11 ай бұрын

hi is that a xt60 plug

@halmakenreuther8843 11 ай бұрын

Should be able to do vertical takeoff 😁

@jayaustin3096 11 ай бұрын

Enjoy it while it's still in one piece. Nobody can fly that thing. Now you have a challenge my friend. Oh ha ha oh ya. Good luck my friend. Show us it can be done. The whole world is watching. Lol.

@yamittr250 11 ай бұрын

3-4 yrs ago you flew a wing in the rock pit. What happen to that place ? Refly that wing Please. I want one.

@golemsnatch5755 11 ай бұрын

Going to be interesting if one of these fans goes out without the other being shut down at the same time.😶

@randall4411 11 ай бұрын

This wing doesn't seem like a good idea , but the saw does .

@michaelwhinnery164 11 ай бұрын

That model is gorgeous. Putting the weight of the EDF's way out on the wing tips is a bad idea.. this plane would fly better if the EDF's were positioned at the center of rotation... with the computer stabilization off this model will have a difficult time getting in the air. I predict it will fly but in a dog fight this plane would get chewed up by the Same plane with EDF's at the center. Good luck with the maiden...