Xiaomi Electric Scooter 4 PRO 2nd Gen

Xiaomi Electric Scooter 4 PRO 2nd Gen - SPEED

Рет қаралды 2,005

23 күн бұрын

РОЗПАКОВКА - • РОЗПАКОВКА - Xiaomi El...
ОГЛЯД - • Xiaomi Electric Scoote...
Xiaomi Electric Scooter 4 PRO 2nd Gen
Part - 1
• Xiaomi Electric Scoote...
Xiaomi Electric Scooter 4 PRO 2nd Gen
• Xiaomi Electric Scoote...
Elektrokoloběžka Xiaomi o nosnosti 120 kg
Skládací konstrukce zaručuje snadné uskladnění
S bržděním si poradí bubnová brzda
Vhodné od 16 let
K výrobě madel byl zvolen kvalitní materiál, konkrétně polypropylen
Barva: antracitová a černá
Pro bezpečnou jízdu je doporučená výška jezdce od 120 do 200 cm
Xiaomi Electric Scooter 4 PRO 2nd Gen je typově městská elektrokoloběžka
S osvětlením elektrokoloběžky Xiaomi pomáhá přední světlo, zadní světlo a zadní odrazka
Elektrická koloběžka Xiaomi Electric Scooter 4 PRO 2nd Gen ...
Elektrická koloběžka Xiaomi Electric Scooter 4 PRO 2nd Gen ...
Další vlastnosti elektrické koloběžky Xiaomi
Pro dosažení optimálního výkonu je nutné zvolit vhodnou velikost kol. Průměr předního kola je 10", zadní kolo má poté průměr 10". Hmotnost elektrokoloběžky Xiaomi se zastavila na hodnotě 19,4 kg.
Baterie elektrokoloběžky Xiaomi

Пікірлер: 18

@kevin-hp7vg 20 күн бұрын

Thanks for the video as always 😊❤ Did you manage to modify the firmware? Or did you change the controller directly? 😊 And I have a question for you, how much PSI do you inflate your tires ? I inflate mine to around 2.2-2.4 bars because I am light (60kgs) and this seems to be a good compromise between comfort and autonomy and durability of the tires (I based myself on the recommendations of the Ninebot g30, which have similar specifications in frame/total weight/tires as this Xiaomi, because Xiaomi makes a PSI recommendation much too high , it is a valid recommendation for old Xiaomi in inner tubes but not for tubeless in 10 ") Thank you in advance for your answer

@AdminAlex123 20 күн бұрын

Thank you very much😊 It was when driving down a hill. When I can change the software, I'll post a video about it. Tire pressure I have 2.7 bars. My weight is 80 kg. I totally agree with you. If the wheels are inflated according to the recommendations from Xiaomi, the scooter becomes very hard and over time the frame begins to creak.👋

@kevin-hp7vg 20 күн бұрын

@@AdminAlex123 Okay I understand, thank you very much for your recommendations, it reassures me in my choice of PSI inflation. It's true that with Xiaomi's recommendations (45-50psi) the driving is far too brutal and the frame (as well as the components) must suffer 😅 being a mechanic I had difficulty interpreting this inflation pressure recommendation (even on the tires it is indicated 100kgs max for 50psi max),it would be more judicious for them to recommend according to the weight of the driver (a bit like cars). Thank you again, wishing you good luck

@AdminAlex123 20 күн бұрын

@@kevin-hp7vg All this is done so that you can drive as many kilometers as possible. Xiom is not interested in the driver's comfort and condition of the scooter. You are doing everything right👍

@ReneLamour 18 күн бұрын

@@AdminAlex123does the creak disapear again if you use less pressure or if once apears it stays ?

@AdminAlex123 18 күн бұрын

@@ReneLamour To make the creaking disappear, you need to use a silicone-based spray. In the place where the scooter is unfolded. Tire pressure doesn't matter.😊

@user-jh2qo8ji9e 20 күн бұрын

Красива локація 🌲🌳🛴

@AdminAlex123 20 күн бұрын

Дякую😊

@user-fm5rx6pv7o 18 күн бұрын

Як ви його розблокували зніміть відео

@AdminAlex123 18 күн бұрын

@@user-fm5rx6pv7o Я ще над цим працюю. Як тільки вийде викладу відео😊

@jacobflores4057 13 күн бұрын

Wow ¿En ese terreno con piedras y árboles no se te dañan las ruedas? Se ve increíble la velocidad desbloqueada, soy de Perú, saludos

@AdminAlex123 13 күн бұрын

@@jacobflores4057 Gracias por tu comentario. Las ruedas resisten sin problemas. La presión de los neumáticos es ligeramente inferior a la recomendada por el fabricante. 🇵🇪 👋😊