Xiaomi M365 / PRO / PRO2 / 1S / 3 extra battery installation tutorial

[@les1669]

Just received my rita today instalation was simple due to the great video's and information you get from David. And you own a xiaomi pro. Thanks.

[@stuartty1]

you are a genius - hope you make a million

[@DenisYurev]

Thanks)

[@davideschiavone2159]

@@DenisYurev ciao mi interessa una batteria extra. Mio numero di telefono e il mio numero e 3402495879grazie Davide WhatsApp

[@nanyibanks]

Hello, does it works with Xiaomi 1s?

[@DenisYurev]

@@nanyibanks yes

[@CALSINA2]

@@DenisYurev essential?

[@skeelo69]

You stopped the music when the old lady crossed the road... 😂🤣😂🤣😂🤣

[@S-O-T]

Brilliant video 😎 My son's pro version does 27 km 😀 I will buy this upgrade kit for him soon

[@DenisYurev]

Thanks!

[@mooseratt]

"You can buy a Chinese battery on Ali express, but it will be an almost guaranteed piece of shit" 🤣🤣

[@imuluer]

Hahahaha so funny how he said 😂😂😂

[@b.bandera3691]

A fews days I became my Boost kit and I´m so excited to start eating the rout. Thanks Denis and your staff. Blessings

[@AKRRektalius]

Great tutorial and nice effect!

[@matt060383]

just installed mine and couldn't be happier, easy to connect and install and with my 15Ah extra battery and limit amps to 25 i am getting 80km range on my pro 2 now. thanks again

[@mrzoro6121]

Hi bro rita is complete with xiaomi pro2? Is different battery then m365 pro cable

[@matt060383]

@@mrzoro6121 i have pro2 and fits perfect, all plugs fit. not sure about non pro m365. takes 10 mins to install and works perfect, i added a 15Ah battery as extra and I adjusted firmware to max of 20 amps now I get 80km range

[@mrzoro6121]

@@matt060383 I have new motherboard FSESC4.20 50A where I can conect the data battery cable is problem

[@matt060383]

@@mrzoro6121 just watch the video, if its different than the stock board then it probably wont work

[@mrzoro6121]

@@matt060383 thanx bro

[@fredisyoga873]

I’m interested in the kit! Looking to upgrade my xiaomi m365 for my wife so she can have similar range as my msuper x when we go on rides together :)

[@significantharassment]

Hello, is the external battery safe to drive with during rain? I use my scooter for daily commuting and sometimes there's no choice but to drive while it's raining, which makes me worry that an external battery is a bad idea for my use. Also, my use of the stock battery sometimes causes overheating during long drives as I modified the firmware to draw more current for hill climbing. Does the RITA adapter evenly distribute the load between two batteries or does it always drain the external one first? I'd just like to know if I should opt for the 12s battery pack over the 10s. Thank you in advance!

[@DenisYurev]

Hi, 1. I would say it is safe to ride during rain if your battery is packed and sealed well. My batteries are good enough. 2. Rita drains a single higher voltage battery first. Then, when batteries voltages are equal, the current is shared between batteries. A 10s external battery is the best choice for you, becase it operates together with the internal battery all the time, while a 12s battery must be discharged by 50% before its voltage drops to 41-42V to start operating together with the interbal one.

[@N1-Tee]

Hello my friend can i do this on a aovo pro m365 scooter?

[@DenisYurev]

Hi! Unfortunately no. Only original Xiaomi and Ninebot scooters are supported.

[@presyan7593]

Hello can you explain to me the part when you use your phone after connecting the battery 4:02 4:03

[@anosromanee-conti7960]

hopefully that u will still produce these awesome mod products in the coming years..😭😭 cause once i have my scooter, u better still keep producing these mod products.😭😭

[@Filipin-vm7gz]

Hello! Do you get yourself a electric scooter?

[@matsudaindustries2530]

Very professional demonstration and video

[@ajayb2478]

Well done ! Love your videos so well explained and edited. Subscribed

[@BurkenProductions]

What is that phone dashboard program you're using while riding called? at 5:25

[@DenisYurev]

m365tools by peretti

[@AndrewSerPro]

Your "hack" is incredible!One question is it compatible with pro 2? EDIT: Yes it is,I read it on your website.

[@jkstudios365]

So it works on the pro 2? Has there been any side effects in relation to the battery, power etc?

[@youtubetube366]

Do the pro 2 get also the 20% more speed?

[@perunao4823]

my top speed is 45kmh with range + speed boost kit and i have pro2

[@CA-RC]

@@perunao4823 Hey stock pro2 motor too? Or upgraded motor?

[@perunao4823]

@@CA-RC stock motor

[@MichaelSimpson-ge1ib]

Hi one more thing if I chose your speed/ range 12s pack and kept my normal internal battery which battery drains first

[@DenisYurev]

12s external is drained first, until it's about 20-30%. Then they are drained together.

[@jonsumpton]

Can you use this kit on the mi essential scooter?

[@DenisYurev]

Yes

[@Awyba]

The piece of cable you used in 2:50 do i need to have that or did you just use it to pull it out of the scooter?

[@DenisYurev]

Any wire is fine)

[@natagush]

Great video! One question: If you flash your xiaomi scooter, will this affect the warranty and serial number of the scooter? And can I "remove" the flash or change it back to the default settings? Thanks for the detailed tutorial! 😁

[@teamcreativity1779]

1. This will remove your warranty. 2. It will have no impact on the Serial Number. 3. You can easily flash it back to original firmware.

[@natagush]

@@teamcreativity1779 Thanks a ton! I've found no answer at all online.

[@teamcreativity1779]

@@natagush I'm Happy, to be helpful

[@blu4able360]

I watched your video, when you were riding I thought, that looks very familiar. Kraków to Andrychów 😂

[@DenisYurev]

Yeah, all polish cities are pretty similar - rynek glowny, zamek. etc). I would say they all are very nice, I like it)

[@angelffalcon3134]

*can you hook up another battery with different voltge or does it have to be the same. Example 36 V and 48v?* I aiamagine no, just connect the same voltages but people on a fb page say you can. Thanks for the response

[@DenisYurev]

The main idea of Rita adapter is to be able to connect 36V and 48 batteries together. The answers is: yes, you can connect 36V and 48V batteries in parallel using my Rita device.

[@getshrekt9023]

Are you still not shipping to the UK? Do you know when you will be able to?

[@DenisYurev]

Hi! Yes, I am still not able to ship batteries to the UK. I have no idea when DPD will resume the service.

[@getshrekt9023]

@@DenisYurev Okay, do you recommend any websites I could buy the battery? I don’t want a cheap rip off

[@Zeductive88]

Hello! Im looking to buy this one but want to use a 13s (48v) external battery. When will you release a video about the installation of a 48v battery with Rita? I remember ypu saying in a video that the installation is a little bit special with higher voltages. Keep up the great work! 🤗

[@DenisYurev]

Thanks! Not sure that I will release it soon, because I have a lot of work. Generally, for 48 volts battery you have to 1. Upgrade the controller for higher voltage support. 2. Cut 12s+ jumper at Rita and then connect it regular way. This information is also presented in the user manual: public.embedden.com/Rita/Docs/English/rita_manual_latest_en.pdf And you can join my public support telegram group, there are some guys who sucessfully connected 13s battery: t.me/m365_custom_electronics_en

[@MichaKaczmarek_Krakow]

thumb up for Cracow ride

[@adrianstanica5338]

Hello mate! Very good this tutorial! Can you send all the pack(increade the speed and battery) to UK?

[@DenisYurev]

Hello, I was able to send parcel to the UK 2 weeks ago, but for now there are some difficults due to COVID and BREXIT. Hope the troubles will dissapear in a few weeks since the UK and EU arranged the trading deal.

[@samlloyd3425]

@@DenisYurev how much does your pack cost for UK

[@kedilipilot07]

Hi Denis, I just want to ask what is that application on your phone that shows all the times voltages etc???

[@DenisYurev]

Hi, m365tools

[@mddlode7168]

Whats the load time of the two batteries (36v two times) is than 18h

[@Bergwacht]

iam used the original m365 battery and an additional 36V 10Ah battery(liitokala) for around a year. The charging time with the original xiaomi charger for both connected was 6 - 8 hours. If you use a cheap China charger, as is usually included with cheap China Batteries it can really take 12 - 16 hours+ I don't know how Rita affects the loading time, iam using the 12s now. greets :)

[@mddlode7168]

So i need now extra connector to load the second batery of 36v

[@fliikiitetheevilvlien2163]

Thorough asf 💪🏋

[@kellynoah6877]

Do you have stock in right now? And how long to ship to the UK?

[@DenisYurev]

Yes, I have in stock. About 5-10 days to the UK from Poland

[@chewsan7733]

@@DenisYurev hi this kite can be installed on the Dualtron mini with Rita ?

[@omowelehappy7097]

I want to do mine to be how can I see you

[@hernandroid33]

Denis ur the best! New sub bro :)

[@DenisYurev]

Thanks!

[@apploz]

this will work fine on the xioami scooter 3 right?

[@DenisYurev]

Yes, but sometimes it's not easy to flash this model. Check if you are able to flash it first. Nevertheless, if you can't - you can still use 10s(36V) batteries with Rita. But you must flash the scooter for higher voltage batteries

[@riyukasumi007]

How is that with the charging of the battery? Is it charged with the original charger or must the spare battery be charged separately?

[@DenisYurev]

If the external battery is a common port BMS equipped(one couple of wires for both charging and discharging), then it may be charged via the scooter charging port together with the internal one. If the external battery is a separate port BMS equipped(with a dedicated charging port), then it is not safe to charge batteries together, because Rita charges an external battery via its discharge port, while a separate port BMS is not able to interrupt charging at its discharge port, which may be dangerous. Another thing is the battery must be a 36V one, otherwise original charger will not able to charge it, and you need a new higher voltage charger

[@bmo7fc802]

Hi do you have the 'Range+speed boost kit' in stock? Delivery to the UK. How long will the delivery take?

[@DenisYurev]

Hello, I need about 3-5 business days to assemble the battery, and then I will ship

[@bmo7fc802]

@@DenisYurev Ok great thank you, I will buy the full kit on Wednesday my friend.

[@solensovida]

Отличное видео! Спасибо

[@jonathanfry2949]

Hi Dennis, You are doing great work. Do you plan to modify your products to suit the Xiaomi Pro 2 soon?

[@DenisYurev]

Hi, it is compatible with PRO2

[@borisevgeniev2912]

Great video! I have mi1s but can't flash with m365downg and I want to buy external battery for better speed (now it is 25kph). Can you recommend something?

[@DenisYurev]

I'd recommend joining my telegram community: there are many battery makers - t.me/m365_custom_electronics_en

[@bonelessx]

Hey Denis, I like the Rita "logic" that you don`t need to fiddle with the different battery packs and keep all on same state etc... because it is very annoying dangerous. However I did noticed that you stopped to sell that specific physically shaped configuration of batteries for the bag. So the link does not exist. Is there any reason for that ? I would love to get the whole pack as well.

[@DenisYurev]

Yes, I suspended batteries sales until August 10, because battery master is going to vacation

[@bonelessx]

@@DenisYurev that is one terrible answer :) vacation. However I was studying elektrotechnik things and I am looking for upgrade. but if someone made it better why not. It is biology.

[@flolan2]

Hi Denis, If it's easy for you to share this info (I've asked several forum with no luck sofar) , I would like to know the reference of the power cables (awg...) in the deck of the M365, also the reference of dataline wires (the three wires twisted green yellow white) And also the reference of the white connector of the dataline, it is a JS-3 pin but there is perhaps a reference of size or type? (For the connectors on the power cables it's XT30 isn't it?) Many thanks, Florent

[@DenisYurev]

Hi. Original power wires are 16AWG 200° silicone. Rita power wires are 16AWG, except the external battery one, which is 14AWG. Original power plug is xt30. Data wires are regular common ones. Data plug is jst pap-03v-s

[@IngVdo]

Nice work! Please do you have this characteristics Table before and after installing the external battery for the PRO model also? There is on paper 45 Km range.

[@DenisYurev]

Hello! It's easy. An extra battery, like I use in the video, doubles PRO range

[@TheHolidaysShopLLC]

Hi Denis, where can i get this "RITA double battery adapter" that you showed to your video???

[@DenisYurev]

Hi, m365.embedden.com

[@MichaelSimpson-ge1ib]

Hi Dennis sorry for the vague question which is I have a 48 volt battery without data wires on it only 2 wires charge wire and power wire the controller has had bms skipped I’m not using xiaomi battery at all can I still use Rita with this set cheers

[@АлександърМадов]

Hi Denis! I just got a Mi Pro 2 and love it! Unfortunately, I live around 11 km from the city centre where I work and the difference in elevation is around 350 meters. As expected, the scooter cannot take me home, as the battery is not large enough and it drains before I get home. Do you know whether adding an extra battery with the same voltage (i.e. without software modifications) will void the warranty on the scooter? Thank you!

[@DenisYurev]

Hi! Yes, of course it will void the warranty =)

[@alessioesposito8260]

Hi Denis. Is possible to put the battery bag on the top of the handlebar rod, facing outward, instead of the place down in the video?

[@DenisYurev]

Hi! Yes, of course it is possible, but I don't provide a mount for this, and you have to think about how to secure the bag. And you also need to extend the wire from Rita.

[@alessioesposito8260]

@@DenisYurev thank you. I'm going to buy your kit at this Christmas. Has your shop also an extender for the wire? I'm not sure to put the bag on the top, but I would like trying.

[@nijatmursali4212]

Thank you for the video. I would like to ask some questions: 1. i got Ninebot G30 Gen 1 which is 36V and I bought another 36V battery from AliExpress which had really good reviews and sells. Do I need Rita adapter in this case while connecting in parallel? 2. In what scenario can external battery explode or something? 3. Do I need to charge these batteries separately, or while connecting them together I can charge them? 4. Do I need to flash my controller if they have the same voltage?

[@Jpslots87]

brilliant, makes a lot easier, when first using can you use normal charging port, or will it require another charger to first charge external to same as internal

[@cirwo85]

Hey I just ordered an extra battery to do this but now found out that the one I ordered can’t be charged in parallel with the xiaomi, it has to be charged separate - can’t be charged thru discharge wires. Hoping this won’t be too big an issue. If you have any advice or tips or anything plz do let me know. Thanks

[@karimhamouda8606]

Can you ship to slovenia? if not anywhere else I can find the rita adapter?

[@DenisYurev]

Yes, I ship to Slovenia from Poland. You can place an order here: m365.embedden.com/

[@mojoleaker]

Hi Denis, will you be uploading the internal battery upgrade solution video anytime soon? Looking forward to that one.

[@DenisYurev]

Hi! Yes, I remember I promised, but I have suspended the internal battery project a bit. I will release it later. At this moment my priority project is Ninebot MAX version of Rita.

[@renesholm6065]

Hi Dennis, I have an essential scooter and just received Rita 4gen. But now I’m aware of my 10s4p battery is with two different cables. One for charging and one for discharging (usage). Not with a common port BMS. 1) Will I be able to use that battery with Rita 4gen securely if I ensure to disconnect external battery when charging. And ensure external battery is charged using external charger? 2: The essential charges batteries in running mode when I brake. Will this setup damage something when using an external battery without a common port BMS using Rita 4gen? Looking forward to hear from you. BR René

[@DenisYurev]

Hi! 1. The most convenient way for your separate port bms equipped battery is to leave two Rita charging lines not connected. That allows you to keep the external battery connected during charging, and just plug 2 chargers at the same time. Check more information in the user manual is "Batteries charging" section - public.embedden.com/Rita/Docs/English/rita_manual_latest_en.pdf 2. Generally, in theory, it may be unsafe, because recovery current goes to an external battery via its discharge port, which can not be disabled by a separate port bms. But in real world this situation is almost unreacheable, because recovery current is not too much to overcharge a battery. Even original Xiaomi battery works this way.

[@dinfar4367]

What does the extra batteri do?

[@keelobrown4991]

Is there a UK version of the charger?

[@DenisYurev]

Yes, I include a special adapter for UK customers

[@keelobrown4991]

@@DenisYurev oh thats perfect, will definitely be ordering when you've got it back in stock!

[@majorpandaru150]

Maybe you explained it in the video but do you need to recharge the external battery separately or do you use the usual battery charging hole and it charges both at the same time ?

[@DenisYurev]

Hi, both batteries are charged simultaneously via the standard charging plug

[@majorpandaru150]

@@DenisYurev Oh ok cool, also what's the difference in terms of what is in the package you ship between the range boost and the range+speed options on the website ? What changes ?

[@DenisYurev]

@@majorpandaru150 Range+speed battery is a higer voltage one, so it grants extra speed, but requires a new higher voltage charger

[@humpreyrivera1073]

hi denis..great videos..ive been watching your videos since it wast in engliah.i cant relate exsactly on datas and procedure.thanks for doing some english versions of your video.i am thingking to order a pack of battery package.but the most potent one.atleast muhlch higher on 12s.my question is if im going to order on your website a bigger battery,do i have to use separate charger,one for yhe original 36v..and another one from your external battery package settings?

[@grahamwilliams8561]

Hi can you please tell me were i can buy one of those controller you place in front of the batteries in your video thanks Graham

[@DenisYurev]

Hello, you can purchase it in my shop: m365.embedden.com/

[@matisurkhroadai3793]

This two batteries how much km work and we can use two batteries by one time conetted

[@bobbymo1289]

OK before I order this, I have a question. I have a standard m365 with a pro dashboard and custom firmware gonka 1.50 installed. If I buy the the range kit will this work alongside the gonka firmware and pro dash board?

[@DenisYurev]

Yes, it will work out of the box

[@bmo7fc802]

@@DenisYurev Ok thank you, I've purchased the range kit.

[@S0ftjam]

@@DenisYurev Hi Denis if I buy Rita and 12s external battery for m365 pro, is it possible to reach even faster maximum speed than 36km/h by changing other parameters when flashing the controller using your website?

[@DenisYurev]

@@S0ftjam with 12s battery you will reach +20% of your current maximum speed.

[@rasankalokuwithana]

Hi, are you not shipping for UAE, I need tot get this full kit, pls advise. Thank you.

[@DenisYurev]

Hi, I am able to ship to UAE, but it costs 90 USD

[@xo3246]

Thank you Dennis

[@DenisYurev]

You are welcome!

[@Saidifect]

Hi Denis, Does this work on the new 1s scooters? I got the BLE 157, DRV 321, BMS 141. Also, do i also have to flash it after or is just plug and play?

[@DenisYurev]

Hi, it works, but some fuss is possible due to 157 if using a higher voltage battery. Range boost kit is plug and play.

[@Saidifect]

@@DenisYurev Thanks for the answer Denis. What do you mean with the fuss? Also, it's plug and play the speed too or only range? For the speed you need to flash?

[@DenisYurev]

@@Saidifect These new BLE sometimes require flashing by a programmer, not by air. Range boost kit is plug and play, not requireing flashing. Flashing will not make it increase speed. Range+speed kit requires flashing.

[@danielwf1971]

Hi Denis. I understand that you can't post Batteries to Australia. Is it ok to post the Rita Adapter by itself. Also Would this work with an ebike battery like this (Ebay: 48V Ebike Battery Lithium 17.5AH 40A Tiger Shark case, charger, Samsung cells) to the scooter goose neck? Thanks for your advice.

[@DenisYurev]

Hello, I did not find the battery you described

[@zeekmclaren3345]

Have you got any stock my friend

[@Chonkybeatz]

Hi mate, do you deliver your Rita kits to the UK and are there any shipping issues?

[@DenisYurev]

Hello, no issues

[@Chonkybeatz]

@@DenisYurev thanks, how much is shipping to the UK?

[@DenisYurev]

@@Chonkybeatz About 20 GBP

[@banzonGreat]

I want to buy the whole range kit including the bag, Rita and 10s batteries. Do you ship here in New Zealand?

[@DenisYurev]

No, I am not able to ship batteries to your country.

[@branislavcebula6432]

Hi, can I ask you a question? I had an external battery installed by a trusted company. When I ride the scooter, I take a break for a while to rest and start the gas again, so the display shows that it is charging. It shows the percentage on the display as if it were plugged into a charger. I do not understand that. I have the recuprration set to Hight. Maybe that's the problem? But it happens on straight way not downhill. Or should I complain that they installed the external battery incorrectly? Many thanks.

[@DenisYurev]

Hi, watch this: kzbin.info/www/bejne/Z5Std5d8eNmAfas In short, you need a custom firmware which disables charging mode at all, this is the simplest solution Or you can use this device if you don't want to flash the scooter: e-scooters.embedden.com/shop/accessories/charging-mode-suppressor-for-xiaomi/

[@branislavcebula6432]

Thank you so much for explaining 👍😊

[@OsayamenThomson]

Hi good morning thank you for your useful information , so please how can I get the original of those things just like your information please

[@dontstealmypenguin]

Hi Denis, do you ship the all in one pack to the UK?

[@DenisYurev]

Hi! Unfortunately I am not able to ship batteries to the UK due to covid and brexit fuss now (April 2021)

[@dontstealmypenguin]

@@DenisYurev ah no worries man, great video anyway!

[@MichaelSimpson-ge1ib]

Sorry Dennis can the Rita be used without the data line from the 48 volt aftermarket battery it’s the Monorim 48 14.4 mah battery

[@DenisYurev]

Yes, you can use an internal 48V battery without data lines via Rita. Just don't forget to set Rita properly(set 13 to the "Internal battery serial configuration" parameter) and cut the green jumper

[@imavridis]

In the specs table with the external battery and only the internal battery, what would be the difference with the rita and without the rita in the case with the external battery? i mean is it the speed, the range in kilometers or the longer battery life?

[@DenisYurev]

+20-30 km range, +20% speed, a little bit more battery life since tle load is shared.

[@History-Point-Shorts]

Hello man, thanks for the wonderful video! I want to mod the battery of my Xiaomi Essential, would any 36V battery pack work without modding the Firmware? Appreciate it

[@DenisYurev]

Hi! 1. If you want to replace the internal battery to another 36V one without special Xiaomi data connector - you have to flash the scooter to let it accept batteries with no data line. 2. If you want to connect an external 36V battery, using the Y-cable mod - you have to flash the scooter to avoid wrong switching to the charging mode when current flows between batteries. 3. If you connect an external battery throught Rita - no flashing is required, you just plug and ride.

[@History-Point-Shorts]

@@DenisYurev Thanks man! I am going to use Rita anyways! Gotta get some extra milage! :)

[@hindozno]

Do we have any solution to the problem that the link for mi 1s cfw is down? Is it possible to use the pro2 link or is it still possible to flash in xiaoflasher for the 1s? Kind regards

[@DenisYurev]

One of solutions is to use a paid XiaoFlasher version, with the firmware builder included.

[@GK_Imagimotion]

Hi. What if I have a second Xiaomi essential scooter and want to take out the batter from it and connect it to my main one, does the way how I do it changes from the one presented by you in the video?

[@DenisYurev]

Hi! It's NOT SAFE and STRONGLY NOT RECOMMENDED to use an original Xiaomi battery as an external one, because its BMS does not protect it from overcharge via its discharge output. You need a battery equipped with a common port BMS, while the original one is separate port BMS equipped.

[@GK_Imagimotion]

@Denis Yurev thanks for the answer.

[@kristofvero7972]

Why you didin't pick the Remove cahring mode on the frimware? It said: Fixes issue of scooter going into charge mode with an external battery connected in parallel.

[@DenisYurev]

Because the main feature of Rita is that you no need to remove charging mode

[@MonkeyUK.]

Was this added in series or in parallel . Trying to get my wires right . + & - to the correct side coming out of the controller . I think the controller shod have a +&- so with two batteries to add power you have one battery’s + from one battery and - from the other battery going to the controller. Then the + & - that’s left gos together. Is that right. I’ve got a 36v am adding iver 12v or 8v battery. To add power to 42or48v . Plus I think I will need to use a relay so it will work when the 12or 8v is switched off. As I do plan on having it as a Opp and not all the time running that type of power. One more thing not sure what u think about controllers. But I think it’s better to over power the controller as if it’s a 48v one there is a low V cut off. So it cuts off at 38v.

[@pylonstrip]

Can i still use the xiaomi charger to charge both the batteries or do i have to get a new charger?

[@DenisYurev]

If you use a 10s external battery, then you can charge both batteries with the original charger. You need a new charger if external battery voltage is over 10s. And please note, that an external battery must be equipped with a common port BMS to be charged via the scooter charging port.

[@pylonstrip]

@@DenisYurev ok thanks for the reply

[@IamTiiny8]

Do you have to charge the battery pack separately? Where can I buy the external battery? Last question that might be 2. When you bought the external battery, did you have to take it apart, if so then where did you buy the blue plastic wrap to hold the batteries in. I hope you read this message. I have a scooter that I want to upgrade

[@DenisYurev]

>Do you have to charge the battery pack separately? No >Where can I buy the external battery? m365.embedden.com >When you bought the external battery, did you have to take it apart, if so then where did you buy the blue plastic wrap to hold the batteries in. I hope you read this message. Google "heat shring tube for batteries"

[@IamTiiny8]

@@DenisYurev awesome I just saw the description without even checking haha thanks a lot buddy

[@chrismcarthur-p9t]

What software/app is used to flash the controller? Regards, Chris

[@DenisYurev]

These days the best choice is "Scooter Hacking Utility" or "XiaoDash"

[@mr.miguelsouls5273]

Prosím pôjde teda nainštalovať externá batéria na Xiaomi Mi Scooter 3 ? Nejak som sa k tomu nikde nedopátral a tomuto videu po anglicky nerozumiem. Raz mi povedali, že na ten môj typ kolobežky tam chýbajú články, na pripojenie externej batérie. Viete mi prosím poradiť? Ďakujem🙏

[@DenisYurev]

Hi, try automatically transtated subs.

[@Pascal666...]

How is the battery selected,? Or are they connected in paralell due the Rita?

[@DenisYurev]

They are "balanced" like they would connected via 2 diodes. The higher voltage battery is discharged first, until the batteries voltages are equal, then they are being discharged together "in parallel"

[@Pascal666...]

@@DenisYurev thank you

[@janersy2003]

Just about to order this Denis. Will it work with 48v 42ah 1000watt 13s3p 18650 Battery Pack Mh1 54.6v pls?

[@DenisYurev]

Hello, yes, but you must reinforce your controller to use this 12s+ battery. Rita also supports it, but you have to connect it special way, please check the Rita user manual "Using 12s+ batteries" section: public.embedden.com/Rita/Docs/English/rita_manual_latest_en.pdf

[@janersy2003]

@@DenisYurev Thank you very much for your reply. Love the product. U legend.

[@vitalijn92]

Are there any updates for the Ninebot G30 ? (Seems like u are not interested anymore for G30 compatibility for whatever reason.)

[@DenisYurev]

No worries, G30 version is completed and tested, and I am finishing some stuff like documentation and videos

[@vitalijn92]

@@DenisYurev That's awesome. 🤩

[@sickquence]

Are you Russian living in Kraków? I am going to order boost kit, you have done very great job my friend!

[@DenisYurev]

Thanks)

[@daveshaw5293]

Hi Denis, how do I improve the performance on my pure air lr ??

[@Mugmeister1337]

I do have a question, I am looking to purchase the extra battery pack with the 20% added speed. Do you still need to flash some hardware or is it just 'simply plug and play'. Or is it just the the extended range one where you just plug and go? And if I connected just the range pack, do I need to separately charge the additional pack or can I charge both batteries at the same time via the scooter charger?

[@DenisYurev]

The latest Rita generation is equipped with a feature, which allows to avoid flashing the controller when using a higher voltage external battery together with the original internal battery. You need a battery with a common charge and discharge port to be able to charge it via Rita. Separate port will also work, but there is a risk of overcharge, because this separate charge port bms is not able to interrupt charging on discharge output You can leave it as is, and be very careful, understanding that there is a real risk of fire Or you can replace it's BMS to a common port one: aliexpress.com/item/32875971231.html Or another option is to charge the external battery separately via it's charging port, not using Rita for distribution charging current from a scooter charge port. In that case you don't use Rita charge plugs at all. You should connect the scooter charging port directly to the original internal battery(as it was connected from a factory), and if you connect it like this the charging current from the scooter charging port will not go to the external battery via its discharge port. Regarding your question: there is no need to charge the external battery separately if the battery is purchased in my store, because it is equipped with a proper "Common port" BMS.

[@Mugmeister1337]

@@DenisYurev Thank you for this amazing responce. I can see why people are delighted with your professional help! I will very soon order the Rita! Thank you very much for explaining so clearly👌🏼

[@sebzr7_63]

@@DenisYurev I ordered the range&speed kit, on its way this week 😀. I got the same question regarding the need to flash the firmware. So far I understood your answer we don't need anymore to modify something in the firmware with the latest Rita release? I'm running my Pro2 scooter with Xiaogen cfw, the charging mode is already deactivated, so I wondering if I need to reactivate it or not? I also wondering if I need to modify the overvoltage battrry setting? By default parameter is deactivated but shows 43volts. Thank you in advance

[@DenisYurev]

@@sebzr7_63 I would say you don't need. But let's see.

[@johncarlevaro943]

Hi, do you happen to know by any chance if the mi 3 battery is the same as 365? Thanks

[@DenisYurev]

Hi, it's the same.

[@KewinWerkPoland]

Can you made such device/inteface for scooters which do not have BMS comunication to mainbooard? I have only Power cable and charge cable from battery pack.

[@DenisYurev]

No, I can't

[@youtubetube366]

Does the battery capacity shown from the both batteries on the scoter display or just the internal capacity? 🔋

[@DenisYurev]

Just the internal one.

[@les1669]

I would like to by one of your kits or pre-order if possible I have a xiaomi pro m365 thanks. Great videos very informative.

[@DenisYurev]

m365.embedden.com

[@les1669]

@@DenisYurev sorry but what is the cost in us dollar and shipping I live in Hawaii. Thanks so pumped to get.

[@matiasnigrum1348]

Denis can I use the original charger to charge both batteries together?... I suppose not but I ask anyway....

[@DenisYurev]

You can do it if both batteries are 10s(36V) If at least one of your batteries is a higher voltage one, then you need a higher voltage charger to charge it.

[@Wave.361]

Hey Denis! Can i still use the Standard 250w Motor, or should i get a 350w Motor? because with the speed upgrade i have a higher voltage right? Because im thinkin about getting a higher watt motor so it works better when i buy the speed and range upgrade for my xiaomi pro 2

[@DenisYurev]

Hi, stock motor is fine. Most of "350W" motors you can see at the market are mega shit. You know, you can go to a shop and buy a 1.5L milk instead of 1L. But it does not work with motors at all, it's not enough to just compare 250 vs 350, there are many other parameters and especially quality.

[@Prefusify]

How do I get hold of RITA attachment to enhance operation of scooter?

[@DenisYurev]

Hi, I did not understand the question.

[@brottochstraff]

Hi Dennis. What is the most hassle free way of doing this? The 10s kit will charge with original charger, show correct battery state while driving and while charging? I don't care about top speed, its illegal here in Sweden anyway, I don't want to risk getting stopped. I only want extra range.

[@DenisYurev]

Yes, 10s is the simplest. No new chargers, plug and ride. And yes, proper charge level displaying.

[@luisrodrigueztineo8397]

Great job, man! Just ran onto your videos for chance, after some hours trying to find a way to safely increase my Xiaomi Essential Scooter without the need of modifying the firmware or the physical structure of the scooter. Is it possible to ship RITA to Chile?

[@luisrodrigueztineo8397]

Maybe an official store on Aliexpress?

[@DenisYurev]

Hi, unfortunately there is no way to ship to Chile, I have no idea why my post office does not provide it.

[@samirduric387]

Can i connect 12s battery in rita adapter without bms or i must connect with bms

[@benclews1980]

Does this same method apply for a kugoo g2 pro? I love my scooter but I want more range.. so wondered of this can he done across the range of most or all scooters? Thanks

[@DenisYurev]

Hi! At this moment Xiaomi scooters only are supported. Ninebot MAX G30 support is upcoming

[@startcherif]

very nice video, thanks for your time

[@animeknowledge5048]

Hi Denis, I'm new to battery stuff and it was very confusing for me to understand: I want to build my own battery replicating your "range+speed boost kit" in the description you said you are using EVE INR18650-26V cells, I'm assuming you are using 12 cells to reach the 44.4V (3.7V * 12 cells = 44.4V) but if every cell has 2550mAh isn't the the total 30,600mAh instead of 10,200mAh. Also the battery on the video you said it has 50 cells sorry for my stupidity but I really want to know how this works.

[@animeknowledge5048]

Ok I made some progress so there are 12 cells in series to reach the 44.4v while other extra cells are to increase mAh I still need to make sure I got this right

[@animeknowledge5048]

I got the explanation for everything I wanted after some research and studying. It's a bit complicated since you are connecting in series and parallel, so if the cells are connected in series we are increasing voltage and if the cells are connected in parallel we are increasing storage capacity to note that the batteries need to be the same mAh. In this case we are using both series and parallel things are bit different in connection to make the 10Ah kit we need 48 of [18650 3.7v] batteries, 1 horizontal row(series)= 12 batteries Volt= 44.4V mAh= 2550 to increase capacity we need other 3 rows (parallel) of 12 batteries to reach 10Ah so 12 rows and 4 columns

[@animeknowledge5048]

Now I get why it says "12s4p" 12 series 4 parallel

[@DenisYurev]

@@animeknowledge5048 Bingo! I am glad that you have managed to discover it =)

[@radekholy7476]

Does Rita act like a BMS for external battery? Or should I put another BMS into my external battery when building it?

[@DenisYurev]

You have to use a BMS. Rita just distributes batteries currents

[@radekholy7476]

@@DenisYurev Thanks, now Im begining to understand the principles. Now for BMS - do I need to obtain one that limits the current to 25A or can I use for example 30A or 40A BMS? If I get it correctly, the control board has a full control on current that is being drawn from batteries, right?

[@matiasnigrum1348]

Denis What means RITA because everybody is mentioning in the below posting.....

[@DenisYurev]

The previous video explains that)