Xiaomi M365 - TEARDOWN!

  Рет қаралды 64,358

eScooter Rider

eScooter Rider

Күн бұрын

Пікірлер
@Thyrex
@Thyrex Жыл бұрын
The most epic disassembling i ever seen!
@stewartpagano1571
@stewartpagano1571 2 жыл бұрын
Thanks mate that helped me a lot with my scooter . Trying to figure it out without pulling everything apart .
@escooterrider1834
@escooterrider1834 Жыл бұрын
Glad it helped! Thanks for the comment!
@mantaskurtinaitis8586
@mantaskurtinaitis8586 3 жыл бұрын
All I wanted to know is how to take the pole connector away from the pole. Everything else is simple as unscrewing the bolts
@alectw
@alectw 2 жыл бұрын
Same
@cristhiko7476
@cristhiko7476 3 жыл бұрын
Help!! How long is the screw at minute 5:41??? I lost the original and the direction gets tight,,, i appretiate it, thanks!!!!!
@allanstrand638
@allanstrand638 4 жыл бұрын
Great work ! but the front engine wheel was never unscrewed!?.
@DennisMathias
@DennisMathias 3 жыл бұрын
Yeah, I wanted that too.
@RetroKafas
@RetroKafas 4 жыл бұрын
Thanks for the video 👍 I just crushed the gray cable (while unfolding the handlebar) going from dashboard to the mainboard. I see I need to detach the battery compartment to be on the safe side while I'm working on to attach the broken wires.
@escooterrider1834
@escooterrider1834 3 жыл бұрын
Yeah, it's always a good idea to detach the battery prior to working with the cables.. you never know when you may accidentally short circuit things
@DennisMathias
@DennisMathias 3 жыл бұрын
I wanted to see the disassembly of the motor.
@Sebur8an
@Sebur8an Жыл бұрын
You didn't remove the front bar from the folding mechanism. I'm currently supposed to do that but i don't think it will come out without braking the bar. Any ideas?
@danielbambino7348
@danielbambino7348 Жыл бұрын
I have a couple of the bars laying around. I'll try doing and let you- Dan
@JorgeBenitez-ev1jd
@JorgeBenitez-ev1jd 9 ай бұрын
@@danielbambino7348 Did you find out how to do it? I have the same question :D
@mireazma
@mireazma 2 жыл бұрын
Is the red brake cable fixed inside the bridge? I can't move it at all, like in any direction.
@escooterrider1834
@escooterrider1834 Жыл бұрын
The red cable is not permanently fixed to the bridge, but it goes through some VERY tight spaces making it difficult to pull out. Apply some WD40 on the cable and you should be able to pull it out. Just keep in mind that it will be difficult to put a new cable back in the same place.
@yusufkenanturak
@yusufkenanturak 3 жыл бұрын
Which number allen did you used in 5:24 and 5:34 ? My latch gaves cracking sounds when i rotate the steer left and right, my service says you can unscrew little and hit tyre to the ground, with this way bearing will be fix a bit with his say. So I need the allen number of this thing's immediately.
@cameronscott9591
@cameronscott9591 2 жыл бұрын
0:41 anybody know what that grey cable is called and if I can get replacements.
@kazcio4701
@kazcio4701 2 жыл бұрын
Idk
@alejandrososa814
@alejandrososa814 2 жыл бұрын
Hi, what is the name of that song?
@Person-wj7wi
@Person-wj7wi 4 жыл бұрын
Please can you show us how to locate and remove the speed limiter
@escooterrider1834
@escooterrider1834 4 жыл бұрын
@Person You should be aware that the speed limiter protects the M365 from overheating. If you remove it, the scooter will be at risk of damage from overheating.
@ssss-df5qz
@ssss-df5qz 4 жыл бұрын
Nonsense, these scooters have proven their durability - I run 1200 watts peak on a 365pro and after 1000+ miles it's fine. Anyway, since you didn't get an answer, I shall oblige - go to the group on Facebook called "Xiaomi custom firmware" and speak to the guys there, they will tell you all you need to know without treating you like a baby.
@tanjiroooo007
@tanjiroooo007 3 жыл бұрын
Please maka also a disassembly of lenovo m2 scooter
@allisonburger911
@allisonburger911 4 ай бұрын
my scooter acceleration jerk whenever I turn light on. Anyone has answer?
@dawoodkhan6067
@dawoodkhan6067 4 жыл бұрын
Can the rear brake light wire at 7:10 be replaced?
@soffe6652
@soffe6652 4 жыл бұрын
Yes but u need a exact replica then
@dawoodkhan6067
@dawoodkhan6067 4 жыл бұрын
@@soffe6652 how do you replace it? Is it just a matter of disconnecting the connector and connecting a new one?
@escooterrider1834
@escooterrider1834 4 жыл бұрын
​@@dawoodkhan6067 The original brake light comes with the wire already attached to the light. To replace it, all you have to do is attach the two connectors together.
@escooterrider1834
@escooterrider1834 4 жыл бұрын
If you're comfortable with soldering then you can easily replace just the wire. However, it's less time consuming to simply replace the brake light which has the wire already attached to it. I hope this helps.
@dawoodkhan6067
@dawoodkhan6067 4 жыл бұрын
@@escooterrider1834 I mean the cable the brake light connector attaches to. Can that be replaced? If so. How?
@aawosi
@aawosi 4 жыл бұрын
Anyone know what alan key was used for the back mud cap
@yamspaine
@yamspaine 4 ай бұрын
That tire was on backwards... it was set to channel water to the treas
@elexiety
@elexiety 2 жыл бұрын
i have a small problem and need some help; I have a xiaomi 1s, and it fell on its side, but when it fell, a metal wire fell off, and i have no idea where it goes. I noticed that the brakes now make a little bit of noise. Anyone got a clue?
@elexiety
@elexiety 2 жыл бұрын
nvm yall it was just displaced after it fell over and i just had to unscrew and screw the brakes back in place
@utsavv1167
@utsavv1167 3 жыл бұрын
Damn… I was waiting for the electrical board teardown 😅
@peerage1
@peerage1 3 жыл бұрын
Any thoughts on how to remove the friction knuckle from the stem post ?
@Лапаю_телок_в_автобусах
@Лапаю_телок_в_автобусах Жыл бұрын
Same question has lead me here, but he doesn't do it on a video
@peerage1
@peerage1 Жыл бұрын
@@Лапаю_телок_в_автобусах I managed to do it! Take the stem post to your local mechanic and ask them to use their hydraulic press to remove it. Take the new knuckle with you and they’ll press the new one in. My local guys did it for free. Only takes a moment.
@Лапаю_телок_в_автобусах
@Лапаю_телок_в_автобусах Жыл бұрын
@peerage1 what is a friction knuckle ? Sorry :))
@MrAnimGuy
@MrAnimGuy Жыл бұрын
scooter:HEY WTF WHY IM NAKED NOW
@Parengkuystv
@Parengkuystv 4 жыл бұрын
Make a video on how to put them back together
@escooterrider1834
@escooterrider1834 4 жыл бұрын
I will. Stay tuned :)
@arielbene2013
@arielbene2013 4 жыл бұрын
Run the video backwards
@arielbene2013
@arielbene2013 4 жыл бұрын
@@escooterrider1834 can you show how to un screw the pole from the folding mechanism ? It has 2 screws , and one of them needs banging with hammer i think
@PlayingWithAndi
@PlayingWithAndi 4 жыл бұрын
you didnt disassemble the fork bearing bowls.
@ssss-df5qz
@ssss-df5qz 4 жыл бұрын
Exactly, a very poor "teardown"
@illidari12211
@illidari12211 3 жыл бұрын
You got to disassemble the wheen hub
@christosmargaritis7
@christosmargaritis7 Жыл бұрын
Sehr gut danke für das Video
@jasondarrall5739
@jasondarrall5739 Ай бұрын
Thankyou..
@mwp9314
@mwp9314 4 жыл бұрын
where is the gps located
@ssss-df5qz
@ssss-df5qz 4 жыл бұрын
On your phone...
@Charkel
@Charkel 4 жыл бұрын
I don't think there is any GPS you have to disconnect if you steal it......
@proxyhx2075
@proxyhx2075 3 жыл бұрын
There is no gps...
@raultorres869
@raultorres869 8 ай бұрын
TY
@skeelo69
@skeelo69 4 жыл бұрын
You did not strip down the motor, nor did you take the tyre off the wheel and remove the inner tubes,and you did not remove the rubber base that you stand on and you did not remove the brake caliper and you did not remove the charging point and the red rubber cap.
@escooterrider1834
@escooterrider1834 4 жыл бұрын
In other words you're asking for a complete demolition...that can be done, all in under an hour, stay tuned...
@illidari12211
@illidari12211 3 жыл бұрын
I just want to see the wheel motor disassembled.
@yamspaine
@yamspaine 4 ай бұрын
didn't take off the folding stem base 😂 that's why I watched it
@Charkel
@Charkel 4 жыл бұрын
Where is the f*cking speaker located?? I need to replace it to a stronger one the warning sound of someone trying to move it is waaaay too low. I need to bump it up a few dB
@nicolaechira3200
@nicolaechira3200 4 жыл бұрын
Taaaare frate !!! Vad ca nu doar noi avem Dorei d'astia care smulg cu patentul cuplele firelor . Spunetii careva ca are cheita laterala . Probabil ca asta pune firele in foc sa scoata cuprul...
@SplixerDEV
@SplixerDEV 3 жыл бұрын
Yeah I just grabbed the scooter to get it out of the car trunk and it disassembled by itself at the part where you can fold it, the more I was grabbing it the more it was falling apart lmao yeah…replaced both tires already and now this uhhh…….
@husseinalkhandak416
@husseinalkhandak416 9 ай бұрын
I have this Xaiomi and I don’t really like it because of it’s really slow speed and non comfortable ride . Unlike the newer models.
@abdulqayum6660
@abdulqayum6660 2 жыл бұрын
Thank you so much for sharing this amazing video with us, God bless you
@escooterrider1834
@escooterrider1834 Жыл бұрын
You are so welcome
@ssss-df5qz
@ssss-df5qz 4 жыл бұрын
Hardly a teardown when you didn't remove the lock block from the pole....
@arielbene2013
@arielbene2013 4 жыл бұрын
Exactly
@proxyhx2075
@proxyhx2075 3 жыл бұрын
I can't get it off, how do I do this? I need urgent help
@ssss-df5qz
@ssss-df5qz 3 жыл бұрын
@@proxyhx2075 you have to heat it up from the outside of the pole with a blow torch to burn the epoxy away. You absolutely must stay under thee melting point of aluminium. Some paint will be damaged, obviously. Once the epoxy is burned up you can put a ram rod in from the top and ram the linkage free.
@allenkamdyn9113
@allenkamdyn9113 3 жыл бұрын
instaBlaster
@BobWhorton
@BobWhorton 2 жыл бұрын
This is the problem with my lads as its constantly breaking the locking cams - cheap crappy Chinese alloy. If I'd known about this before buying the new complete folding block assembly (simple up until now), I'd have gone in another direction.
@يوسفمحمد-ض1ظ
@يوسفمحمد-ض1ظ Жыл бұрын
Is there someone who can give me a scooter that I need badly to go to university, I will be very grateful to him because I need it so much 😢💔
@zwirek3488
@zwirek3488 3 жыл бұрын
Don't buy this rubish scooter. We had two regular and pro versions. After 2,500 km, the bearings will be so loud that it is impossible to drive. Bearings practically impossible to replace. Will start to violin, tap. The brake cable will break. It will stop charging. Replacing a punctured inner tube is a nightmare . My friends scooter broke down after 1200 km. The Xiomi warranty covers nothing under warranty. They demanded 3/4 of the value of the scooter for the repair of a faulty loud motor of no known fault. Stay away from these chinese scooter…
@xuxianruan1778
@xuxianruan1778 2 жыл бұрын
if u dont relay on chinese stuff nowtoday, you died already.
@voodoochile7581
@voodoochile7581 3 жыл бұрын
Why sped up so fast. It’s a pointless video. Dislike
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
xiaomi M365 scooter water damage FIX
10:30
Maker Fabio
Рет қаралды 9 М.
2WD Xiaomi Scooter Frame Conversion at 48V 1700Watt MAX Output
34:14
Xiaomi M365 Battery Issues - Diagnose And Repair
8:08
Well Done Tips
Рет қаралды 1,6 МЛН
How To Revive Dead Scooter Lithium-Ion Battery - (Or Any Device!)
16:26
inside a Xiaomi Mi Electric Scooter Pro, experiments & fun (unedited)
13:42
10 BEST Accessories for ELECTRIC SCOOTERS | Xiaomi M365 Pro
21:20
SlammDunk Productions
Рет қаралды 599 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН