Xiaomi Mi 11 LITE 5G - How to REPAIR Power BUTTON

[@moridichiu]

Thanks

[@CrocFIX]

You are welcome and thanks for the donation :)

[@ill-fatedgamer]

Thank you soooo much. I have had this phone in my house 2 years not working. I was able to fix because of your video !! now my daughter has a new phone. She is VERY HAPPY .

[@CrocFIX]

You are very welcome and thanks for your feedback :)

[@miskod1364]

That twist was amazing. I was fixing the same phone and faced this problem. Then I got to your video and you did it very nicely. Thank you.

[@CrocFIX]

You're welcome 😊 I'm really glad i can help with my videos. I also hope for some support...just a click on the LIKE button and Subscribe to my channel 💚

[@josefbarton5528]

Thank you for the perfect instructions, in 1 hour the repair is done!

[@CrocFIX]

I'm glad my video did help you. You are welcome and thanks for your feedback ;)

[@OM-Enzo]

Many thanks for your excellent repair instructions! I followed your guide constantly during the repair of my Xiaomi Mi 11 Lite 5G on a tablet not to forget anything, and now my device finally remembers and recognizes my fingerprints again! I only deviated from your instructions on one point: When I had successfully opened the carefully heated device according to your instructions, I thought it made sense to rub off the still soft adhesive first to have a flat surface for re-gluing afterwards. But I'm sure you and all the others will do the same next time :-)

[@CrocFIX]

You are very welcome. I'm glad that you think so and that my video was helpful. And yes, always rub off or cut the soft adhesive if there are bubbles or bumps. Thank you for your feedback and don't forget to Subscribe. :)

[@bensonobinna6703]

Your a great teacher. Very good in explaining.

[@CrocFIX]

I do what I can :) Thanks for the lovely comment and I hope you Subscribe to my channel :)

[@daromani]

Thank you so much for this video. I need to replace the power button on my Xiaomi 13. I cannot find a video that shows this procedure for Xiaomi 13, nbut I assume it will be a similar process to what you did in your vide. I have several questions: 1. Do ypou know of a supplier to purchase a Xiaomi OEM replacement power button? I have not been aboe to find any onlne, they all seem to be aftermarket. 2. Xiaom3 13 has IP68 water resistance rating. Do you think it is possible to retain this rating after this repair? 3. I notice you use a special caulking fo rmobile phones for the back cover. Where do you get this caulking? Would B7000 or T8000 be a suitable replacement? Thank you.

[@CrocFIX]

You are very welcome. Yes, it is a similar process. And now to your questions. 1. The OEM button you should find here - ebay.us/eDrOUG 2. No. Only with factory machines or really only factory replacement parts including sticker kits and screws etc. 3. Yes, B7000 or T7000 or T8000 is a suitable replacement. Check my links. 4. You are welcome and good luck ;)

[@RupaChettukonda]

Thanks bro very usesfull video thanks u very much ❤❤❤❤😊

[@CrocFIX]

Glad I could help. You are very welcome and enjoy :) Hope you Subscribe ❤️

[@DaveDdk]

Hi, great video, will help me for sure. Please give me a hint - my Mi 11 LITE 5G turned off yesterday by ca. 25% battery, no reaction on the power button now, display stays black. Also nothing get displayed when the charger is connected. Is it possible that the power button is broken or maybe the battery?

[@CrocFIX]

Hi, it could be a cable, bad connection of the power button or display connector. Also the battery is possible. Take it apart and look carefully. Good luck 🤞

[@georgek5754]

I changed it and after 2-3 months I had the same issue. What do you suggest? I was thinking to buy a new phone because it is quite annoying that the button stacks inside.

[@CrocFIX]

It's a common Issue. Try to protect somehow the Flex cable of the button. It gets broken somewhere...

[@kanerecca702]

replacement button still support fingerprint function?

[@CrocFIX]

Yes

[@melvineikao4430]

not every hero always wears a cape but a huge thank you my friend!

[@CrocFIX]

Thank you for the very nice comment and you are always welcome :)

[@DoomWalker42]

Can I open the back cover without a heat gun? Would using a hair dryer work instead?

[@CrocFIX]

Yes, an Hair Dryer will also do the job for once. For more repairs I suggest an adjustable heat gun.

[@DoomWalker42]

@@CrocFIX Thanks I can't afford a heat gun unfortunately I would try it on the lowest heat though. Would it damage the phone to use the hottest temperature?

[@CrocFIX]

@@DoomWalker42 Never use too hot air. You can damage the internal parts, camera and other stuff.

[@DoomWalker42]

@@CrocFIX Ok I will be careful.

[@renz8529]

does the finger print works after replacing power button?

[@CrocFIX]

Yes. In some cases you need a factory reset, but not always.

[@theodordruid7396]

Thank you! Easy to follow and now my wife has a working phone again😊

[@CrocFIX]

You are very welcome. Thanks for your feedback :)

[@zakzag]

This video is clear and quick fix for the button i was struggeling with for months because i could not switch on my phone. I saw another guy who heated up the background with hot air soldering station but I found it very stupid to do.

[@CrocFIX]

Yes, the best way is just replace the button, it's not expensive. Thanks for your comment btw.

[@zakzag]

@@CrocFIX I have problems with the battery. If I put it back, the phone sometimes shows 0% charge, sometimes the right one, but it looks like does not charge when put on cable. But eventually it does. when it charges to 100% it won't change, even if i use it. DO you have any idea what the problem is?

[@CrocFIX]

@@zakzagdid it happen when you repaired the home button?

[@zakzag]

@@CrocFIX yeah, I took out the battery, but when i put it back, it did not work properly any more. for example now I charged to full, but suddenly the charge level dropped to 0 and the phone switched off. Must be some contact problem or something. Have you ever experienced it?

[@CrocFIX]

@@zakzag Maybe it's just the connector. Try cleaning the battery connector and the connector on the motherboard. Look close if you have bended or damaged something. Alsow look if you have riped a cable.

[@avimoris5589]

‏‪ ‏ ‏‪0:33‬‏ Hi can you please help Me to get Power button Where to buy? 😅

[@CrocFIX]

The link is in my video description ;)

[@Mark-nw6lh]

What's the type of the screws please

[@CrocFIX]

philips screws

[@Boso917200]

Helló. By your videó I fixed this phone a few minutes ago. I also spent few minutes about how was the cable... 😂😂

[@CrocFIX]

Hehe...Thanks for your feedback. Subscribe and join the CrocFIX tech family and be first to see the latest tech videos ;)

[@akram_khan]

it seems you're very careful even fitting the tape properly great teacher

[@CrocFIX]

I try my best. Thank you for the great comment. Hope you click on LIKE & SUBSCRIBE ❤️

[@stariacell]

Sir, is this button compatible with every Mi 11 lite version? Like 4g or 5g ne ?

[@CrocFIX]

Yes, it's compatible with 4G & 5G

[@stariacell]

@@CrocFIX okay thank u sir

[@CrocFIX]

@@stariacellwelcome

[@marcinnn9836]

Dzieki, wymienione w 15 min

[@CrocFIX]

Zapraszamy :)

[@زانهسعدالعسيري]

I want to order this, I cut off the start button, but I am in Saudi Arabia, and what is the price of this piece?

[@CrocFIX]

You can check my links in the video description

[@juniorgie5044]

Can I turn on the phone by clicking on the pins from the power button?

[@CrocFIX]

No

[@NELSERVICEHANDPHONE]

tengkyu suhu...sukses slalu

[@CrocFIX]

You are welcome 💚

[@AhmedEhab-z9w]

Where to get the button from?

[@CrocFIX]

In my link in the video description. You can buy everything there

[@NikyRipy]

HI. You forgot to move those two little square black spacers. 😊

[@CrocFIX]

Thanks for reminding me :)

[@ΓΙΑΝΝΗΣΚ-η3υ]

VERY GOOD ! THANK YOU !

[@CrocFIX]

You are welcome and thanks for your comment :)

[@ahmedpeak]

My power button 11 lite NE become soft Can it be repaired by cleaning?

[@CrocFIX]

Not really...you can try and see if there is dirt inside, or just pure a bit of isopropyl alcohol in the button and try clean with a toothbrush. But I think you will need to replace it, as the small dot on the button probably got worn out or have been damaged. Good luck.

[@ahmedpeak]

@@CrocFIX thanks a lot. Sometimes the key is stuck and causes the phone to be restarted, whether the key is corrupted or still dirty??

[@CrocFIX]

@@ahmedpeak Hard to say. You will need to open the phone and check.

[@ahmedpeak]

@@CrocFIX Tnx bro

[@azmc4940]

It worked, but I cracked the glass backplate, that happens very easily.

[@CrocFIX]

Great that it worked and sorry for your glass. Luckily it's not that expensive

[@godsownsoldier]

Power button getting stuck is a very common issue on this device. Its saddening cause it was such a beautiful device. 😢

[@CrocFIX]

True

[@Mike-zw3wi]

Super Anleitung, Danke 😊

[@CrocFIX]

Freut mich! Bitte und danke für dein Komentar :)

[@MahavirsinhPadhiyar-y4r]

Thank you ❤ I'm successful this this mi 11 lite fingerprint stirp replace 😎🔥❤️❤️❤️

[@CrocFIX]

You are very welcome. I'm very happy my video did help you 😁

[@_KG_]

Can anybody tell me how looks 8/128 global version motherboard. Does it look exactly like 6/128?

[@CrocFIX]

Sorry, I don't have that information (I think it should be the same look). Maybe someone of the community will have the answer.

[@_KG_]

@@CrocFIX Anyway thanks a lot. Maybe you could give me advice where I can order motherboard of Mi 11 lite 5g (m2101k9g) 6/128 or 8/128 Global version, not Chinese one with global firmware written?

[@nacatiri4600]

do i need to buy a DIGITAL HEAT GUN to open my phone? it costs like 128$

[@nacatiri4600]

oh i found some for 45$, but still

[@CrocFIX]

You can use a hair dryer if you will do just one repair. For more repairs I would suggest tu buy a Heat Hun, becauste of the precise heat setting

[@Dean.Michael.Winchester]

This is not the same for Mi 11.. The button and switch is seperate.. Cant find any way to remove the button itself..

[@CrocFIX]

Mi11 and Mi11 Lite are not the same

[@Dean.Michael.Winchester]

Is this the same for Mi 11? my power button suddenly become "soft" (no clicking sound) and did not do anything when pressed.

[@CrocFIX]

Tutorial is similar, but the part to order is different.

[@Dean.Michael.Winchester]

@@CrocFIX i saw in online store, the button and switch are 2 separate part, unlike mi 11 Lite. In my case, do i have to replace the button only or both button and switch? The volume up and down are working like normal tho, only the power button is "soft" and not working.

[@AntonydavidM]

gracias mano hice el puente con la miniatura de tu video y me sirvio

[@CrocFIX]

De nada

[@johnromananodan5324]

What's the name of the power button? I'll buy a new one

[@CrocFIX]

The link is in my video description

[@Bitterbean.]

Thanks!

[@CrocFIX]

Welcome!

[@silk2679]

You are repairing nothing just replacing it

[@CrocFIX]

Kind of true. But if you bring the phone to a repair shop. And they reapair it, because it didn't work...and they replaced some parts to make it work. Did you collect a repaired phone or a replaced phone?

[@HappySingh-r8f]

👍👍👍👍

[@CrocFIX]

;)

[@kailashbhadhana3268]

Thank bro

[@CrocFIX]

Welcome

[@arkadiusmaximus4631]

Great !

[@CrocFIX]

Thanks :)

[@yomtovbachar4996]

למה חייב להחליף כפתור קול

[@CrocFIX]

זה כפתור ההפעלה ולא כפתור עוצמת הקול. כי זה לא עובד

[@marketingdms]

Hi my power button is also dead. Is there a way to power thé phone without power button?

[@saadamin79]

Yes attach the wire to phone and laptop. Press volume button to enter recovery mode. Then you can restart by resting the pointer at reboot for 2 minutes

[@CrocFIX]

@@saadamin79thanks for sharing

[@susanarodriguez1430]

After changing power button, Touch ID still working?

[@pietroenricopannunzi682]

change job, bro !!!

[@CrocFIX]

:)

[@nihe5247]

Why are sou saying Mi and M I?? 😂

[@CrocFIX]

Sorry, my accent :)

[@xiaodre9845]

I just broke the back glass dammit

[@CrocFIX]

:(