I'm sharing my way on how to remove and replace the tire & tube of the xiaomi scooters. #FrontTubeReplacement #EasiestWay #Scratchless
Пікірлер: 33
@jasonlin5214 Жыл бұрын
Wow, after trying so hard myself to get the front tire back on. Just when I was about to give up, found your video, and using 2 vice grips, got it on just like that with minimal effort. Thank you for uploading this video!
@GilberthFrancisco Жыл бұрын
Welcome sir
@iuriimtl Жыл бұрын
your video already save my time twice... thank you!🤝
@GilberthFrancisco Жыл бұрын
Welcome 🙏
@brettoau842 жыл бұрын
Thanks, vise grip method is definitely easier that previous videos I’ve followed
@openachiu29092 жыл бұрын
thank you for sharing. You cannot believe how easily Xiaomi scooter get punctured tires, even in good sidewalks! Just changing the tire/inner tube is so much trouble. Other higher end escooters now have split rims, making it much easier to change tires.
@RealKushrage3 жыл бұрын
I wish I saw this earlier xD I scratched mine very hard :/ You got my sub for that thanks man :D
@RealKushrage3 жыл бұрын
@@Kaunas666 yea this is such a dumb shit
@RealKushrage3 жыл бұрын
@@Kaunas666 replacing bike tire is waaaay easier
@RealKushrage3 жыл бұрын
Could you please make a video about replacing the bearings on the front and back wheel?
@MuslimahBuilder Жыл бұрын
Gracias!!!!
@GilberthFrancisco11 ай бұрын
welcome
@OnateDario2 жыл бұрын
Thanks, the hammer/screw trick to remove the valve was useful! However I wanted to say the DRILL IS OVERKILL, at least on my Mi Scooter Pro. If you observe the valve opening, it has a plastic part and and a metal part (the actual rim). The plastic CAN MOVE relative to the metal, and if it is misaligned the valve will NOT go in. So I used a small allen wrench (any small metal tool should do) to leverage the plastic part to alignment, and then the valve with the same tool. Hope that helps someone.
@pepsodenttube2 жыл бұрын
If you removed the motor cover, no drill will be needed
@mesutlifestyleandtravelvlo80122 жыл бұрын
Salamat Brother.
@S.... Жыл бұрын
Screwdriver to the rim is your way of having ot scratchless?
@GilberthFrancisco Жыл бұрын
Where is the scree driver?
@jkstudios3653 жыл бұрын
Could you do a video on replacing the disk brake to 135mm or 140mm on a xiaomi pro 2?
@GilberthFrancisco3 жыл бұрын
Just did mine
@alienmodz1210 Жыл бұрын
recommended was paranoid tho that friend of mine take a bolt out motor put it back in dint no if is,right enough but the tire method with drill is no1
@Buzzhumma Жыл бұрын
ilike your style bro
@hasansakib39693 жыл бұрын
what size vice grip you used
@joelmendoza41452 жыл бұрын
Idol magkano ang tire with tube..standard ba sila kahit anung model nang scoter
@sebastiankot16262 жыл бұрын
Brawo ;)
@jimmay86273 жыл бұрын
Strange that your 2:32 wheel nuts weren't caked in more threadlock compound than I've ever seen in my life, as mine was. I'm heading over to Autozone tomorrow to borrow the longest 18mm wrench they have to get that second one off.
@bebelovebobo Жыл бұрын
im having a lot of trouble removing these nuts. even tried heating it with a hair dryer
@esmailkarimi2472 Жыл бұрын
Perfect 👌
@noelromaguerra5724 күн бұрын
Mas mahirap Pala ito mag palit interior kesa sa bike haha
@GilberthFrancisco20 күн бұрын
Oo sir
@buhayabroad88633 жыл бұрын
Bro,pwd pa ako mgpa hack sayo nang batery capacity. Mag babayad ako