Followed this video and broke every clip on the lid , watched again paused and zoomed when he turned over the lid and noticed all his plastic clips are also broken, a warning at the start of the video would have been nice.
@KWPZ213 ай бұрын
It's a quick disassembling quick guide afterall. 😂
@nmnrmk10 ай бұрын
Thanks for showing us the proper way to destroy the top lid 👏🏻 I should have read the comments first 🤦🏼♂️
@Doppelgahner8 ай бұрын
Top cover cannot be dispatched from the device without breaking clips. To not breaking the cover itself, use plastic or wooden spatula, put it inside near the clip and gently push it, but with force. AFter fixing what you wanted to fix, just put the cover in place and remember it's not holding in place. Thermal glue is an option as well - top part is not heating during work and glue wouldn't melt.
@ibnfahmi7372 Жыл бұрын
[🛑WARNING] My top lid is broken following this guide
@vanngocao11317 ай бұрын
Mee too.I broken 5 plastic clips holding the top cover when tried to remove it. You should bend the cover inward to release the holding clips
@IguanaMGT29 күн бұрын
@@vanngocao1131 I thought so, too. Nope. That way it's easy to break the lid itself because it's very thin.
@TadasLaur Жыл бұрын
good job, your top cover is broken 🤣👍
@hayatev98 Жыл бұрын
After ko buksan saka ko nakita comment mo. Ayun sira. 😀
@PVflying11 ай бұрын
What is the correct way to remove the lid without breaking it?
@TadasLaur11 ай бұрын
@@PVflying still don't know 😅
@PVflying11 ай бұрын
@@TadasLaur ok! 😄 I don’t know if it is worth me taking mine apart. The screen stopped working which means it is guesswork when you try to set the temperature and time. Part of me thinks it could be a loose connector between the screen and the main board, but probably if I take it apart I will break the lid and then discover the screen needs to be replaced, which I can’t do without a spare part which I can’t buy anywhere.. So less than 18 months after buying this thing it is junk
@TadasLaur11 ай бұрын
@@PVflying yes it could be pure contact, so its posible to fix. I always braking top lid, then using super glue to mount it back 🤣
@IguanaMGT29 күн бұрын
I recreated those clip tops that broke off with heat glue gun. In case that won't work due to heat melting the glue, then I'll use my son's 3D printing pen which uses sturdier plastic filaments. I don't have it handy. Also, using thermal glue you can just cover sides of the broken incomplete clips to make them thicker and the glue surface will add friction to hold it in place firmer than without it.
@ManiaReina6 ай бұрын
How to destroy the top cover quick guide , that’s the proper name for this video
@ReparatumismoSPAIN11 ай бұрын
Hello, great video that will be of great help to me, I have to check a coworker's machine with E1 error, turn the machine off and on and the error disappears, sometimes doing it several times, according to the little documentation that there is on the internet, It is a failure of the thermal sensor, can you please tell me if you have encountered this problem and if it is directly the sensor or a problem on the PCB
@silviagarciamendoza-demon11 ай бұрын
Hola en tu vídeo dices que han realizado una modificación la empresa, yo acabo de ver este vídeo en cámara lenta en el segundo 0.36, también sele rompe las 5 seguridades, últimamente los electrodomésticos estan desechables y no se dan cuenta de la contaminación que esto provoca, saludos desde Barcelona España
@ReparatumismoSPAIN11 ай бұрын
@@silviagarciamendoza-demon Muchas gracias por indicarlo.
@Magacelo6810 күн бұрын
buenas tardes las dos tapas superiores donde se pueden comprar gracias
@sametcalsknn7 ай бұрын
Sir, is it possible to remove only metal mesh ?
@gxmcdg6 ай бұрын
I think the "shafts" of mine arent locking the basket in place properly when I insert it in the airfryer. I have to smash the basket inside the airfryer in order for the shafts to "lock" the basket and the airfryer start the heating. Any idea on how to fix that?
@KommyKT9 ай бұрын
where can I buy a new heating pipe?
@liudmilakarablikova6064 Жыл бұрын
How to remove the top cover, i can not do it😢 do you need special tool for that or is there a secret combination of moves? 😅
@V1RUS-nx4tc8 ай бұрын
Angielski I damaged the cover. It is set very firmly. In the video, the ends of the hooks are probably broken off?
@liudmilakarablikova60648 ай бұрын
@@V1RUS-nx4tc me too, i just broke the lid of😁 but while i was breaking it I thought that i am opening it properly 😅
@nandiudvarhelyi4167 күн бұрын
Követtem a videót,.mindjárt az elején ahogy le kell venni a tétjét, akkor már mind a 4 műanyag fülecske eltört. De látom a felgyorsított videón is látszik hogy 3 el van törve. Mind1, legalább portalan és tiszta a sütő teteje... A gyártó meg b....meg amiért ilyen gyenge műanyag pattintós fület csinált.
@tasy1210 ай бұрын
Mine has a problem with the rotor. It stops spinning after 1-2 mins.
@arosnett5 ай бұрын
Visited my parents and found this crap present unused. Turned out the fan never worked. Disassembled and broke the clips of course. Found the fan windings are not good. Open circuit from Neutral blue to high/low speed wires:(
@yuldashevroman3 ай бұрын
Broke all the rivets!🤬
@leizelann1226 ай бұрын
Misleading way of removing the top lead.
@V1RUS-nx4tc8 ай бұрын
Fraud. It is impossible to dismantle the cover so quickly. The hooks are strong. And they often break when dismantled.
@KpatrikZoltan Жыл бұрын
How to remove air outlet? I try it but..
@kliibapz2 ай бұрын
It's so hard
@user-vf8ro5se2c6 ай бұрын
Top cover is broken even i used the same tools. Dont follow this video.
@nattakitphuphatsirikorn40985 ай бұрын
Look like this is not the same model. The cliplock at 4 corner cannot push or pull to unlock