XIM Matrix How To Use The XIM Workshop No Recoil Basic Guide Anti Recoil

Watch the Advanced Workshop video right away: / ximcentral
Link Channel Membership Subscription: / ximcentral
Buy XIM Matrix here (paid links):
Cheapest = Flashback: www.flashbackltd.com/products...
Amazon US: amzn.to/3DTZkFS
Amazon Germany: amzn.to/3KFbsyd
Amazon UK: - in a few weeks -
Amazon France: amzn.to/45Pr5es
Amazon Italy: amzn.to/4609Ebg
All XIM Distributors & their shops: xim.tech/shop/
Link XIM Workshop Firmware & Manager: community.xim.tech/t/xim-matr...
Link XIM Manual: guide.xim.tech/What-Is-XIM-MA...
Link XIM Matrix Groups Guide: • XIM Matrix - Smart Act...
(xim.tech) Designed by gamers, XIM MATRIX provides the best possible mouse/keyboard, gyro aiming and controller solution for the Playstation 5, Xbox Series X/S, Xbox One and PlayStation 4. It also offers Smart Actions, Universal Sensitivity and a lot of other exclusive features!
Intro made by WarCat Designs. Contact infos for business inquiries: Email: [e-mail]
Twitter: / kylec786cod
Song: Lightness by Nomyn (monetizable copyright & royalty free)
Link to the song: • Lightness - Nomyn (No ...
/ nomyn Creative Commons - Attribution 3.0 Unported - CC BY 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library • Lightness - Nomyn (No ...
#xim #ximmatrix #norecoil

[@XIMCentral]

Watch the Advanced Workshop video right away: kzbin.infojoin Link Channel Membership Subscription: kzbin.infojoin Buy XIM Matrix here (paid links): Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66 Amazon US: amzn.to/3DTZkFS Amazon Germany: amzn.to/3KFbsyd Amazon UK: - in a few weeks - Amazon France: amzn.to/45Pr5es Amazon Italy: amzn.to/4609Ebg All XIM Distributors & their shops: xim.tech/shop/ Link XIM Workshop Firmware & Manager: community.xim.tech/t/xim-matrix-firmware-20240114-manager-20240114-beta/280976/3 Link XIM Manual: guide.xim.tech/What-Is-XIM-MATRIX/ Link XIM Matrix Groups Guide: kzbin.info/www/bejne/aXvXdKl5pdGspsk

[@fernandocarrera2680]

Could you help me with a configuration for PS4's Warface?

[@XIMCentral]

@@fernandocarrera2680 Hey, i have never played the game but in the XIM Forum you might be able to find a config for it.

[@ExeCuTjioN]

When does the r6 video drop?

[@XIMCentral]

@@ExeCuTjioN Probably end of the week, its already in early access for channel members.

[@ExeCuTjioN]

@@XIMCentral danke bro

[@user-oj6ri5vj6i]

Odin, you're the best!!! Very informative and simple to understand! Thanks 🙏

[@XIMCentral]

Happy to hear that, thanks! :)

[@six6q]

Workshop was a W, hope the xim team keep releasing updates like this

[@XIMCentral]

Happy to hear that man! :)

[@AkanPush]

Excellently explained and a child can do laundry. Finally I can really get started with my matrix. Class thanks Xim for this and Keep up The Good work. Regards Diabolk

[@KizWhalifa.]

What are you on about lmao 😂

[@MadTabMan_UK]

Excellent video tutorial. Thank you so much

[@PrismFave]

nice tutorial, made one myself on it but yours is way more in depth

[@XIMCentral]

Thanks man! The in-depth tutorial in a few days will show a few more tricks on how to achieve a truly perfect result! :)

[@PrismFave]

thank you will need that @@XIMCentral

[@getdestroyed1958]

Thank you for this amazing feature!! I can’t wait to mess with it today!

[@XIMCentral]

Let me know how it works out for you!

[@getdestroyed1958]

@@XIMCentral I messed with it on mw3 using the ram7. It was a little tough to dial in. I may need to mess with it more, but I think it would be great for you to do a tutorial on this for cod! I don’t think i I could dial it in like it’s a laser beam, because of the randomization, but a small cluster I think could be doable, but would love to see you do it!

[@XIMCentral]

@@getdestroyed1958 Hey, the steps for CoD would be the very same as shown in this video. Use the vertical modifier to further spread out bullet holes, and then trace 3 pattern. Use the X and Y scaling afterwards to finetune. This should provide an excellent result afterwards!

[@getdestroyed1958]

@@XIMCentral TY! I did that and it doesn’t look like yours lol. It makes me wonder if it’s possible to get the bullet spread very tight for COD. Seeing you demonstrate it in COD would set the tone for what realistically you can do for COD. Just a suggestion. I still need to mess with it more, but I love the enhancements!

[@XIMCentral]

@@getdestroyed1958 What is the outcome when you finish the workshop and dialed in the X and Y Scaling?

[@guerinogames6976]

Xim top 1 thanks !!!

[@Haunttts]

Feel pretty competent with workshop, yes. Am I still gonna watch the video? Also yes

[@XIMCentral]

💪😄

[@bronko4858]

Beam du bist einfach der Beschte❤

[@xnobodyx9799]

Hii nice tutorial this will be pretty usefull, i got a question, for common synch the value is still around 15? Thankss❤❤

[@XIMCentral]

Yes, roughly 15-0-0. In some games you may have to use 13-0-0 or maybe 17-0-0 though.

[@KingKush-420]

I wish I had this xim before I switch to PC looks like fun

[@XIMCentral]

Matrix is also PC compatible and allows native MnK output. So you can play CS2 and other games with native MnK while using smart actions and everything else! ;)

[@47kicks75]

Very nice video!But how u manage different weapons during a game? For example in Warzone, u start with one weapon, and when u get your loadout - you get another one- your main one. You have to switch beteween profiles ingame for every weapon?

[@XIMCentral]

See the video recommended at the end of the video on how to do that! :)

[@Elbomboclat1]

I’m so thankful for this! The anti recoil use to be hard for me.

[@rizzeerizz8985]

about time m8

[@420]

I need to watch and learn about groups. I need multiple recoil patterns for common weapons I use in Apex Legends.

[@XIMCentral]

See the video linked at the end of the video for that! ;)

[@Matrix_DHZ]

Hey Odin, I appreciate the effort you put in the videos so that everyone can understand (in what your doing a insanely good job) and copy it step by step. Thank you very much for the guidance! I do have one serious bummer to talk about, it’s the mousetrap on R6. Since the Majors begun I get moustraped left and right, with no reason what so ever. I do have a GK61 with SAB on 78 and a Logitech G Pro Superlight with SAB 54 (I went from 50 / 36 up) but I still get Moustrap every other game (even without the anti recoil settings) and this is a real bummer for me because R6 is such a nice game that I used to play day in day out but now I don’t really wanna touch the game anymore

[@XIMCentral]

An improved SAB may get released soon for Matrix. Until then your only way is to progressively increase your SAB until you are fine again. The upcoming SAB is much more advanced and offers far more customization! It has been refined by alpha testers for lots of months now!

[@Matrix_DHZ]

@@XIMCentral thank you for the information, hoping to watch the upcoming video on that once it releases ;)

[@XIMCentral]

@@Matrix_DHZ Will definitely do a video on it once it reaches release state! ;)

[@paulvolpe1274]

How does the recoil affect other guns. Since this example is for r301 how would it effect the flatline or the smg ones?

[@XIMCentral]

Those have different recoil patterns and would require their own workshop. See the end of this video on how you can conveniently handle this within one config! :)

[@NM-vj8nc]

In a game like Apex Legends like you are showing, is it better to do the recoil workshop with our without attachments that affect recoil such as the barrel and stock?

[@XIMCentral]

Weapon attachments change the recoil pattern. So ideally use a weapon loadout that you are very likely to use ingame for the most consistent results.

[@HAHAd2]

Don’t use barrel stabilizers

[@NM-vj8nc]

@@HAHAd2 oh nice tip, all the rest is best with the epic attachment i assume

[@ibez07]

is it worth upgrading my apex for a matrix? can u do an apex legends matrix config with guns recoil controlled plz. thank you for all your help over the xim apex lifespan, im still 7sing the matatuiki config :)

[@XIMCentral]

If you see value in the Matrix exclusive features and improvements then yeah the upgrade is definitely worth it! Ill soon do an Apex Legends config video for Matrix! :)

[@Weather-rs9fu]

Hi I was wondering if it was possible to use an older manager for xim matrix on the phone having to constantly go on my pc to change settings etc is a bit tedious

[@XIMCentral]

Thats not possible, no. You can however upgrade your phone manager to the most recent beta manager if you want to.

[@MadTabMan_UK]

Thanks

[@XIMCentral]

Wow thanks a lot for the donation, i think that is the second one i have ever received since like 10 years of KZbin haha. Much appreciated! :)

[@megaquex_6393]

i cant connect my ps5 directly with lan cable. is it possible to use a repeater with lan switches? so wifi router connects to repeater and from repeater with two lan cables to ps5/matrix?

[@XIMCentral]

Yes thats possible! :)

[@deadghost2154]

Nice work , i have a question how can u make bullets stay on the wall in apex legends?

[@XIMCentral]

I think its somewhere in the Firing Range settings.

[@phildean6884]

So do I do it for each magazine for example I’m going do this for the R99. If I do it with a level 3 mag and have no mag will it work or not ?

[@XIMCentral]

Hey, you would do it with a max size magazine. Then it will also work with smaller magazines.

[@Franciscoxds]

Is it possible to make a xim aim response curve for the linear COD in game response curve? I feel that this would govern even better mouse movements and work better with aim assist.

[@XIMCentral]

The XIM ST is already providing you with a linear experience. It doesnt matter what response curve has been used when training the config ST, the result will always be linear. What matters though is how good the response curve is and how well the resolution points are distributed across the controller. Linear is usually really poor in that regard and therefore usually not chosen as the response curve for XIM STs.

[@myrePlayyyy]

Thanks for ur great work all the time! But I wish u would upload a complete tutorial for apex legends just like u did with the Xim apex before 😎 I think the most people don’t understand how the Xim Manager works out…

[@XIMCentral]

Oh that will come very soon! Will do a Matrix matutaiki config tutorial prior to that though (probably)! ;)

[@colbyc2273]

Does it matter how close you are to the wall when shooting and tracing bullet holes?

[@XIMCentral]

That doesnt matter! :)

[@user-be2gf3rd4q]

Tell me, do you plan to implement the dualsense trigger effects?

[@XIMCentral]

I think that is on the to-do list, but i dont know how high the priority is. The Dev Team is currently working on other projects. Features are usually addressed based on popularity within the XIM Forum.

[@hishamalhabrosh6010]

Hey odin I like this feature a lot and i used it in mw3 and it works very well, but in the game (The Finals) the bullets disappear almost instantly after you reload so you really don't have any time to trace , what do you think the solution for any game that has disappearing bullets be ? Thanks alot for the videos ❤

[@XIMCentral]

Hey, take a screenshot of the bullet pattern to later trace it. Ideally dont shoot into a completely blank wall but a wall with distinctive marks. You can then later use those marks to identify where each bullet went in your screenshot to the aim to that position. If you use a completely white wall then you will have no orientation on where to aim when looking at your screenshot.

[@hishamalhabrosh6010]

Good tip , but still it will be hard to trace all the bullets , i will try this tip and give you my results later , thx a lot ❤

[@XIMCentral]

@@hishamalhabrosh6010 Any wall with lots of scratches or paintings on it can help to later identify on the screenshot where a bullet hole was located!

[@user-nr8bv9es8i]

@ximcentral I have a question if I’m playing hybrid mouse and controller for movement for r6 do I still need to use sab or can I turn it off and leave it at 0?

[@Mika2Acccount]

U need aim sab

[@XIMCentral]

You can disregard Move SAB then since you already use an analog movement device.

[@LHDubstep]

How do you do this on the finals? The bullet holes disappear before you can trace them

[@XIMCentral]

Either take screenshots/a video while shooting at a wall with a distinctive texture so you can later track where each bullet went to, or do the manual anti recoil way as shown in my "XIM Matrix Perfect Anti Recoil" video. With that approach it doesnt matter if bullet holes vanish rather quickly.

[@SadFacecx]

Sorry, I'm a little lost, is the advance workshop not available for warzone config for example? Edit I managed to find it when I was looking into the apex config files but I couldnt get it to pull up for warzone config

[@XIMCentral]

Hey, all game configs have the workshop. You enter a binding of your choice, go into the smart action manager, and then into the workshop. If you are on controller then the steps are a bit differently. I have covered those in a dedicated video on this channel.

[@raisedservices9540]

Will Xim make presets for each game for each weapon? Then just copy and paste the preset?

[@XIMCentral]

The XIM Cloud will most likely have that once it becomes available.

[@Flankurself]

if I set it up on a close wall would I not be able to shoot far because there different patterns and if I set it up for far won’t they be different close

[@XIMCentral]

Hey, use the vertical modifier to help with this. If necessary set it to a negative value to tighten the recoil.

[@azzuleop7044]

is there secondary binds for matrix like there is on the apex?

[@XIMCentral]

Yes there is. You can bind as many button with additional actions as you want to! Also you have up to 7. Assign different bindings to a new group and then switch into that group to access completely new and independent button layouts!

[@willwood2360]

How do you do it if your using lmg that has large magazine.

[@XIMCentral]

Use the vertical modifier with a negative value to tighten the recoil so all bullets fit onto the wall.

[@limonix682]

What should those who have an iPhone do? When will the app be released from beta testing? I really want to customize my macros. But since there is no current manager for iPhone, I can’t do it :(

[@XIMCentral]

Either sideload or use the PC/Android Manager. The XIM Company is trying to find a solution but its really hard with Apple and their policies :(.

[@limonix682]

what about PC manager? Do you need bluetooth on your PC for it to work?@@XIMCentral

[@OnlyPluto-_-]

Hello I have a question, what would be a solution too me using the besavior, I can’t use it because on my ps5 slim my headset dongle is blocking the other usb c port

[@XIMCentral]

XIM Matrix with its PS5 compatibility would be the best alternative.

[@blasedimento8999]

I have the besavior u5 and xim apex. When plugged in it will work for a couple seconds then become completely unresponsive. If it’s drawing too much power what do I do to fix that? Also I never updated my besavior but I only have a MacBook can I still update the firmware on a Mac? I want to use this to play ps5 games but can’t figure it out please help. Thank you

[@XIMCentral]

Hey, see the Beloader forum, you must downgrade your firmware.

[@chrisortiz432]

I have a question will the xim nexus gyro controller work on PS5 after the unfortunate update.I dont have a labtop right now so remote play wont be an option.

[@XIMCentral]

Hey, which update do you mean? Did you previously use a Besavior U5?

[@user-uk7jx2pq3s]

Are you going to make a video about antirecoil on xdefiant by any chance ? :D It was working fine until the tweak for the aim assist. I have huge trouble there haha

[@XIMCentral]

What is the issue with the aim assist? What has changed?

[@user-uk7jx2pq3s]

@@XIMCentral my bad, what i meant was : When you talk about tweaking the values again to make it work with the aim assist ( when you are on the target ). It still has the weird flinch at the first bullet even when i change the value haha

[@XIMCentral]

@@user-uk7jx2pq3s You can remove that by manually editing the smart action sequence of your workshop result. Say it goes up right at the start, then increase the deg/s of the first entry. If it moves down to much lower the deg/s of the first entry.

[@GokkeShu]

Do you have a discord or something? Guides are fine and that, but theres still so many questions newbs needs answeared, like how do you use the manager with nav mode off? i cant use the workshop while im in nav, but i cant use the mouse while im not

[@XIMCentral]

Hey, you can check out the XIM Forum with over 100.000 users on that. The XIM Company has no official Discord, there are a few inofficial XIM Community Discords though. I also run an inofficial Discord as a channel member KZbin perk. I would recommend to use the XIM Forum instead though, since most questions have already been asked there and must only be looked up via the search bar.

[@funkzll.]

Any tips for doing this on rust ?

[@XIMCentral]

Either stack Workshops for Rust or use the manual anti recoil approach as shown in my "XIM Matrix Perfect Anti Recoil" video.

[@SubduralAudio]

Would you ever do a private Discord screen share? I would pay you to walk me through this. I'm over my head and cant seem to figure it out

[@XIMCentral]

Hey, what exactly do you struggle with?

[@MrTurbocheeks]

Hi Odin, long time premium member here, will you be returning to making game configs again soon? I’ve been using your configs pretty much since Xim apex came out and they have always been perfect for me, especially Call of duty Cold war and Overwatch 1. A config tutorial for The Finals or for Xdefiant when it releases would be great, thanks 👍

[@XIMCentral]

Hey, yes config tutorials will resume very very soon! Next week i wanted to create a video for a XIM Matrix matutaiki config, and after that most likely Apex Legends, then CoD/WZ3! :)

[@maryahreed304]

Hello my xim just came in today and all my devices are plugged up but while I’m playing r6 while in the shotting range I can’t move my scope. It will only allow me to aim and shoot. When I aim I can’t move my scope to a different direction using my mouse. Any suggestions?

[@XIMCentral]

Hey, you must leave the Nav Mode for this to stop. See this guide to get started: guide.xim.tech/What-Is-XIM-MATRIX/

[@user-hk7tq9il4p]

Привет установил последнюю версию прошивки и xim не стал конектится с планшетом а на старой версии всё работает нормально подскажите в чём проблема

[@XIMCentral]

You must update both your XIM Firmware via PC or Mac, and the phone manager. You cannot use the phone manager from the app store anymore, instead use the one from the XIM Forum.

[@bonkers7772]

Top video habe nur 1 Problem wenn ich schieße zieht das Aim komplett nach unten

[@XIMCentral]

Siehe X and Y Scaling im Workshop, damit behebst du das (wird im Video auch gezeigt).

[@abdulla84uae]

all good until i get into the trace part ny weapon fire instead of clicking an the xim matrix wants me to disable firing how to do that when i wan to trace each bullet ?

[@XIMCentral]

If you have several fire actions you must disable those by clicking into them and then top left active -> disabled.

[@user-bq3ho6fk9n]

Does the workshop work for if I want to use smart actions on controller only?

[@XIMCentral]

Yes absolutely, and its exactly the same steps. You just use a controller config instead and open the workshop from your fire binding (usually right trigger).

[@pueto1609]

when is advanced tutorial out will it help with siege guns going side to side while under sustained fire ? only thing i cant get right just always goes side to side not good at the timings

[@XIMCentral]

It will be out today for channel members (early access) and sometime next week for everyone.

[@sahinbeycur9227]

​@@XIMCentralI couldn't find it on the xim website, is it published?

[@XIMCentral]

@@sahinbeycur9227 It will be out today for channel members (early access) and sometime next week for everyone.

[@williamgunther4397]

Hi , so im trying to play R6 on the ps5 only with dual sense and mouse, i understand it is possible to use the controller for analog movement.But for the other actions in the game can i also use all of the other buttons like L1 L2, the cross etc.?. Just to clarify can i assign the rest of the unused buttons on the right half of the controler(R2,R1,etc.)to my mouse?, and use all of the left half buttons and analog stick + all of the right side buttons asssigned to the mouse at the same time?.

[@XIMCentral]

Yes thats possible!

[@user-nr8bv9es8i]

Yo bro yes it’s Possible by the way what did u assign your crouch and lean binds too?

[@SamuelK4r1m1]

Xim - me and my buddy compliment this channel and continuously praise you. We have one Q though How do you control the last 10 bullets on a gun if the rest of the bullets are centred and no recoil? For example it goes left at the end.. Any help is massively appreciated.

[@XIMCentral]

Hey, check if the weapon maybe uses randomized recoil for the last 10 bullets. Most games do that, especially rainbow six. The last few bullets are randomized and will therefore kick into different directions with each magazine. It is not possible to remove that, unless the game offers ingame weapon attachments that reduce or remove the randomization.

[@SamuelK4r1m1]

@XIMCentral thanks, xim Swift reply, you're awesome. Do you offer a service where we can pay to have you build patterns? Discord maybe? Also, it's on mw3 Last Q Would recoil stabilisation attachments help with that? Or gun control? Etc. Thank you as always brother!

[@XIMCentral]

@@SamuelK4r1m1 Soon the XIM Cloud will be up then such things can be found in there. So dont pay anyone! Plus you will only get scammed with poor results anyway. And yes recoil stabilization attachments are exactly what you want to use! Some remove randomizations, others remove only vertical recoil. So look up what each attachment does specifically to choose the right one(s)!

[@SamuelK4r1m1]

@XIMCentral love you brother. Thanks a lot 🫡

[@coranmazyck9554]

i dont have this updated version on my phone & when i check the app store it doesn’t tell me an update is available. someone help

[@XIMCentral]

Hey, you must download the manager from the link in the video description. You cannot use the manager from the app store anymore, that one is older and doesnt have this feature.

[@apspb-kaybo7783]

How could i make aim more smoothly when i shoot it not smoothly like last version feel off any advice?

[@apspb-kaybo7783]

My mouse dpi 10800 g520 mouse

[@XIMCentral]

Change the smoothing preset back to "Light". The new firmware uses "Synchronous" as the default option which is more direct and less smooth.

[@Coprilia]

Ich freue mich auf das Video mit R6. Denn bei R6 funktioniert das Ganze, wie du auch schon erwähnt hast, nicht so gut.

[@fiskus5781]

Does the custom ballistic curve also affect the result of the workshop ?

[@XIMCentral]

Good question, i would need to check back with the Dev Team on that but im quite sure that it doesnt affect the result!

[@MrTantrim]

so the basic recoil pull method is gone and we have to do the tracing in the workshop?

[@XIMCentral]

Its still available, you can now do both. It's up to you what you prefer! :)

[@vidflu6920]

I'm thinking of buying the Xim Matrix would it work on ps5 after updating because i can use my Zen

[@XIMCentral]

Yes XIM Matrix continues to work with the PS5! :)

[@Mika2Acccount]

Freu mich schon auf das advanced anti recoil video

[@XIMCentral]

Sollte heute Abend in den early access gehen und nächste Woche dann für alle verfügbar sein! :)

[@carlashton8224]

2:25 when I add my trigger button and click smart actions there is no option for me to click workshop manager… I just got my xim today I’m on ps4. Help would be GREAT thank you.

[@carlashton8224]

I’m also playing apex legends

[@XIMCentral]

Hey, you must update to the new firmware. Also see the Controller Workshop video from me to ensure you do it the right way. Analog inputs cannot have a Workshop.

[@phildean6884]

Also how do I find out the fire rate for each gun

[@XIMCentral]

Via Google usually, just search for your game + weapon name + RPM.

[@SubduralAudio]

Can you do this so it has different patterns for different guns?

[@XIMCentral]

Yeah you can, see the mentioned video at the end of this video on how to do that! :)

[@SubduralAudio]

@@XIMCentral Would you ever do a private Discord screen share? I would pay you to walk me through this. I'm over my head and cant seem to figure it out

[@XIMCentral]

@@SubduralAudio Hey, i have replied to your other comments! :)

[@martingazi880]

How I do workshop in destyni2 if bullet disappear on the wall

[@XIMCentral]

Take a screenshot or video of the recoil pattern and use it as a reference to trace the bullets. Use a wall with marks that you can use to later tell where the bullets went to.

[@spite_ae]

the wrench is not showing up for me what do i need to do?

[@XIMCentral]

See the video description, you are on an older firmware.

[@ttruss9748]

Is this coming to the Nexus manager as well? I don’t use Keyboard and Mouse only controller and I cant seem to get it to work. When tracing it doesn’t move up or down acts like my controller is sitting in one spot.

[@Yungie201]

I initially thought the same, but with the complexity introduced in the latest update, simultaneous updates for both the Matrix and Nexus are no longer feasible. Although the Nexus has the capability to handle these advanced features, implementing them would be time-consuming and challenging. Unfortunately for Nexus-only users, the Matrix tends to take precedence in updates due to its larger user base.

[@XIMCentral]

You can use the Workshop with controllers too, just make sure your stick is bound to the aiming role in the first menu screen. After that it should work to trace bullets with it.

[@bodyinlake]

@@XIMCentralWdym first menu and how do I bind it on seige

[@XIMCentral]

@@bodyinlake Hey, i have replied to your other comment! :)

[@shiftxjsizzle2057]

Can I please get a walk through on xbox setup I can't get the new firmware to work.. my controller won't trun on my xbox series x.. I try navigation mode still won't work

[@XIMCentral]

Hey, see the linked XIM Manual Guide in the video description for that (chapter Xbox setup).

[@Wrxftw12]

I have your orbital AA for Cod, would that affect the workshop if I were to do It?

[@XIMCentral]

Turn it off while using the workshop, other than that no it wont affect the Workshop outcome!

[@Wrxftw12]

Thanks, Odin!

[@jackgarber2673]

Followed all your steps, but when I have Destiny 2 open in a private match, nothing happens in the workshop mode, with both the vertical modifier and the tracing - nothing I've done changes anything, my recoil is still the same, the vertical climb is still the same, and it won't register/actually do the tracing. I don't know what's going wrong.

[@XIMCentral]

Hey, have you followed the recommendations from the beginning of the video? Such as aim roles, role assignments for RT and LT, and using no "Gamepad (Smart Actions only)" config?

[@aWuIf]

Would i be able to have this anti recoil while using a controller?

[@XIMCentral]

Yes, see my most recent video upload on how to do that (XIM Matrix Controller Workshop Tutorial video).

[@finessinlive]

A note for cod players (and maybe others) - if not looking sketchy is important to you, I’d highly suggest using an antirecoil value that still gives slight recoil when on target. If you choose the heavier antirecoil, trying to hit someone on a heady, you’re likely to briefly aim at the wall and just start shooting straight downwards. It can be pretty detrimental in a lot of situations, and sometimes you can’t even help it. The antirecoil will briefly pull you to something without aim assist and all goes to shit. It can be fun shooting in the sky and in the open though

[@CnosboR]

The best! 🎉❤

[@OjalaStudios]

How does this apply to Warzone? I notice what i add in shooting range does not work in warzone. What about behaviour simulator?

[@XIMCentral]

Hey, make sure to have the same weapon attachments in the shooting range or else the recoil will be different. As for behaviour simulation, see the beginning of the video.

[@user-fs2nn2sb8z]

my xim nexus controller is not turning off or doing any changes when i try to use it

[@XIMCentral]

Hey, what do you mean? Can you describe the issue in more detail? At what step did you get stuck?

[@triky5672]

Can u make a video on how to quick peek on xim matrix

[@XIMCentral]

Sure i can do that!

[@HideYourAk]

My manager on my phone is updated but it still won’t connect to my xim saying the manager is out of date how do I fix this?

[@XIMCentral]

Hey, you must update your manager, its older than your firmware. You cannot use the manager from the app store anymore, instead use the manager from the XIM Forum (link in the video description).

[@joaolouro03]

Maybe i am missing something but when i get to the scale refinement part it doesnt show my patter and only says 4 actions out of 30, i am new to xim and i cant figure out what am i doing wrong

[@XIMCentral]

Hey, have you followed the requirements from the beginning of the video? Such as using the correct ingame settings and such? And does your traced pattern look similar to what is shown in this video?

[@Mohammad-oz5ui]

Hi xim central i just bought my besavior u5 and it was working the past 2 days now if I blog it in its work for mybe 2 min and stop working is ther any solution for that problem i saw in another video someone has the same problem i think is banned from sony

[@XIMCentral]

See the Beloader website forum, Sony must have changed something and you have to downgrade your console firmware i heard. Instructions are on their website/forum.

[@Mohammad-oz5ui]

@@XIMCentral how can i downgrade

[@XIMCentral]

@@Mohammad-oz5ui The Beloader website/forum has instructions on that.

[@Mohammad-oz5ui]

@@XIMCentral ok thank you so much

[@hohvlbumbohead3463]

At 4:05 after you shoot at the wall when I play mouse and keyboard my controller won’t be useable and I can’t measure the bullet marks

[@XIMCentral]

Hey, please see my "XIM Matrix Controller Workshop" video on how to solve that! :)

[@doflamingo5065]

@XIMCentral por favor haz un video de como copiar los códigos de configuración he tratado de hacerlo von los que publicas pero no funciona quizas es una tontería pero es mi primer xim y me ha costado trabajo configurarlo 😢 tienes publico mexicano seria muy buena idea hacerle una traducción a los videos me encanta como esplicas las cosas pero aveces usas terminos en ingles que desconozco 😅

[@XIMCentral]

Hey, you can see how to use codes in my XIM Matrix OW2 Config video! :)

[@doflamingo5065]

@@XIMCentral si lo ví entre al link pero al momento de copiar y pegar el xim matrix me decía que los códigos no eran validos... Muchas gracias por tomarte el tiempo de responderme ☺️

[@XIMCentral]

@@doflamingo5065 Oh i see! You must update your firmware to the new beta one, then the codes will work.

[@GodBending]

I can’t use the workshop update manager it says beta is full “matrix”

[@XIMCentral]

You can download the IPA file from the XIM Forum and sideload it. Apple restricts Testflight to 9500 users and there is nothing that can be done about it sadly.

[@zzz-ze3xt]

How does the new output input thing work when making a new config?(before the beta I was able to switch between controller and mouse in the same game)

[@XIMCentral]

See the new XIM Manual guide linked in the video description for all details on that. You can still do that, but you need to use the respective input and output.

[@zzz-ze3xt]

Ok thank you

[@TheRealCarWashGuy]

In BO4 is hard to do this because when you shoot at the wall the the bullet wholes disappear before you can even trace all of them .

[@XIMCentral]

Use a wall with distinctive scratches or textures, then take a screenshot once the pattern is on the wall. After that use the scratches/texture to tell where each bullet went to from the screenshot.

[@bryanelser1803]

​@@XIMCentralSo if a game doesnt display the bullet holes at all should i just guess it? Or just dont try it at all?

[@XIMCentral]

@@bryanelser1803 You just use the manual anti recoil approach as shown in my "XIM Matrix Perfect Anti Recoil" video.

[@bodyinlake]

Why is it saying bindings that fire must be disabled

[@XIMCentral]

That means you have additional fire actions being bound that would otherwise cause the Workshop to fail. If you were to trace bullets you would shoot each time which makes your weapon kick around and ruin the Workshop result.

[@doflamingosama5723]

301 easy weapon but other like havoc, flatline, r99 and dev so hard setting the recoil

[@XIMCentral]

Stacking two workshops usually lets you remove the recoil of any weapon. Make sure to trace plenty of traces to avoid the weapon sway from ruining your result.

[@m4ds3n]

Hey i consider buying this product, but i dont got a controller, do i need it if im on pc if i want aim assist? and so ill get it. and do u need more than 1 mouse and keyboard?

[@XIMCentral]

On PC you dont need a controller (only if you want to play with one). One keyboard and mouse is sufficient as Matrix also offers MnK output so you can control your PC with your MnK through the XIM.

[@m4ds3n]

@@XIMCentral Ah okay thanks do you mby know any reseller from eu?

[@XIMCentral]

@@m4ds3n Official resellers with warranty are linked in the video description of this video! :)

[@OmarM.Mostafa-rz9jp]

s this something available for Xim Apex too or is it only for Xim Matrix ?

[@XIMCentral]

Just XIM Matrix, XIM Apex doesnt have the hardware capabilities to run something like that :(.

[@clarkkent5415]

On console tracing I have a controller on port 1 n another on port 3 but when I try to trace there’s nothing . N navigation is off.. when It does trace the tracer is not moving at all… but mainly do I use the controller on port1/2 or do I use he controller on port3 to trace?

[@XIMCentral]

You use the controller connected to port 1. Make sure your stick has the aim role correctly assigned, and that your input and output is correct.

[@clarkkent5415]

@@XIMCentral ok but now when I get to the Tracing part it won’t trace n I’m still firing shots n I made sure the input n output is correct

[@XIMCentral]

@@clarkkent5415 See the beginning of the video for all requirements. Several of those are the reason for why you suffer from this issue (additional fire actions, aim role, ...). Go through all of them and it should work as intended again! :)

[@CruudyyNotAverage]

My app on my phone says out of date any fixes ?

[@XIMCentral]

Does it say your firmware or manager is out of date?

[@user-qb5kj2ot9o]

How do I block the right trigger when doing the workshop on controller?

[@XIMCentral]

Hey, what do you mean with block the right trigger?

[@Njhdsw]

Wow this sooo good 👍 🤩

[@sahinbeycur9227]

Bindings that fire must be disabled how can i do that

[@XIMCentral]

You edit the binding and set it to "deactivate" in the top left. See the video on how to do it.

[@megaquex_6393]

hii xim team. i have played with xim apex and the besavior u5, now i cant use the u5 and i cant play ps5 with apex. do you have a solution or fix to play with the apex on ps5? i cant play via remotr because i havent a pc... its possible with an update to support the ds5 directly with the apex hub ? thanks

[@XIMCentral]

Hey, maybe check back with the Beloader team to see if they have a solution already. Alternatively use XIM Matrix which has inbuilt Remote Play and doesnt need a PC.

[@megaquex_6393]

the xim costs in ger 200 euros thats much more than a functional apex😅

[@XIMCentral]

@@megaquex_6393 True, but you wouldnt need the XIM Apex anymore then so you could theoretically sell it for 100-150€ on eBay.

[@user-bq3ho6fk9n]

When can we expect you to make a video for how to make anti recoil for The Finals on console? Controller smart action only. I've tried workshop and it didnt work.

[@mikelanj]

Yes an anti recoil matrix “the finals tutorial” on console would be super helpful 🙏🏻

[@XIMCentral]

See my "XIM Matrix Controller Config" video. You cannot use anti recoil when using a "Controller (Smart Actions only)" config, thats just not possible because you have no ST. Select a "Controller" config, follow the steps from the controller config video, and then you can use the Workshop too! And the Workshop can be used in the Finals as well, its just a bit harder to follow the bullet holes because they vanish quite quickly! :)

[@user-bq3ho6fk9n]

the workshop is not working for me, ive tried it 4 times I dont know what I am doing wrong.@@XIMCentral

[@vexgolem7060]

If i try the mode to check my dpi it shows low Numbers like 100/150 and I use 115000 dpi, do u know how to fix it?

[@XIMCentral]

Connect your mouse to the PC and use its software to change the DPI value. Make sure to save your changes onto the mouse memory so the changes carry over to the XIM.

[@hsnflm]

Have a quastion man, dose apex and matrix suppot the analog movment of razer huntsman analog keyboard ?

[@XIMCentral]

It works but not in analog mode. They keyboard requires Razer Synapse to use the analog features. Only Wooting keyboards are analog when connected to a XIM.

[@hsnflm]

@@XIMCentral so if i use razer synapse and activate the analog would work? And what should i get, wooting one or wooting 60he or it dosent matter? And thanx man 4 answering me😊

[@XIMCentral]

@@hsnflm It wouldnt work since Synapse requires you to connect your keyboard to the PC. So you would need to find a way to connect keyboard -> PC -> XIM to source your keyboard inputs via the PC to the XIM. You have to get a Wooting 2 or Wooting 60HE. Their new keyboard also works, i think its called Wooting 70.

[@hsnflm]

@@XIMCentral thanx a lot man, would be great if u make video how to make wooting feels like analog cuz mine dosent feel like😬

[@XIMCentral]

@@hsnflm I wrote a guide in the XIM Forum on how to setup the Wooting with Matrix! :)

[@Franciscoxds]

is there a way to do a usiversal just vertical one? that only helps a little but works for all guns. (im interested in COD)

[@tylerc3576]

Active on ADS only ; bind to Right trigger; Aim angle 180. Aim magnitude whatever you want that helps.

[@XIMCentral]

Hey, what do you mean with universal?

[@lordsalad-hands2564]

Yes this is what I would like to know as well, is there a way to have anti recoil applied to the entirety of guns instead of having to use a script for each individual gun and attachments

[@tylerc3576]

@@XIMCentral I'm assuming they just mean vertical recoil help, that will help with all guns just a little bit, never have to change anything. Which is why i recommended they just do a simple ADS ONLY, aim angle 180 and aim magnitude like 2.5 degrees

[@XIMCentral]

@@lordsalad-hands2564 If a game uses different recoil patterns for different weapons then it would be impossible to use one smart action that can perfectly remove the recoil for every weapon. You would need one for each gun then.

[@sadixzz8629]

Hello, do you know that I have a problem with the fire button, I create the action to not recoil using workshop and when I finish shooting and I continue to hold the mouse fire button, the sight continues down, is there a solution for that error please or maybe I am doing something bad I could explain myself 😢

[@sadixzz8629]

Likewise, when I hold the trigger button, my sights go down when I use up the gun's magazine.😢😢

[@XIMCentral]

Hey, do you maybe have another anti recoil smart action somewhere? If so deactivate it before going into the workshop. Alternatively create a brand new XIM config and directly go into the workshop. Finish the workshop in that config, then copy the smart action and paste it into your normal config.

[@sadixzz8629]

​@@XIMCentralThe anti recoil works well for me but the character after using up my bullets 😭 goes away alone looking down, I still can't correct that error

[@MrSantivic84]

Markers on wall disappear how did you keep your

[@XIMCentral]

Either take a screenshot or a clip. Or do the manual recoil adjustment that doesnt require bullet holes as shown in my "XIM Matrix Perfect Anti Recoil" video.