XIM Nexus - Best Rapid Fire Setup

[@XIMCentral]

Link Channel Membership Subscription: kzbin.infojoin

[@Aceshooting]

I would say you probably still need to accommodate for recoil on your delay on a per weapon basis. Still this will be super helpful for DMRs in semi automatic rifles in games.

[@zeus9902]

Great! Ordered mine last Friday

[@Hungryboy1999]

Do you still use it? Received mine 3 days ago and already regretting it😂 (the learning curve from playing on mnk for a while)

[@iceagex]

Beloader won't work anymore with the new PS5 update. It flashes green and blue and won't connect, please reply if you have the same problem. Thanks!!

[@XIMCentral]

Hey, you must update your beloader firmware then it will work again. More infos here: community.xim.tech/index.php?topic=102107.msg884024#msg884024

[@iceagex]

@@XIMCentral Yup, already done this before and It's working again without any issue 👍🏻👍🏻👍🏻

[@XIMCentral]

@@iceagex Great to hear that! :)

[@kraxkiebox8479]

@@XIMCentral i updated it and it’s not working , i do not know what to do

[@XIMCentral]

@@kraxkiebox8479 Hey, check if you installed the correct firmware. There is one for the normal Beloader and one for the Beloader Pro.

[@UpsideDownGaming97]

My rapid fire is only active when slightly pulling on Right Trigger, how can I make it to where it works for trigger held all the way down?

[@XIMCentral]

Set the activation precentage of your trigger binding from 1% to 100%. Then it will only activate if you fully press the trigger.

[@chaseleadingham2341]

@@XIMCentralpls help it still will only work when I slightly press it

[@XIMCentral]

@@chaseleadingham2341 Hey, what do you mean? What are you trying to do and what doesnt work?

[@chaseleadingham2341]

Well what happened it when I set not up and do what you said 1 to 100 the rapid fire only works when I slightly press the trigger

[@XIMCentral]

@@chaseleadingham2341 And you want it to work when you fully press the trigger instead? Then switch the rapid fire activation from 1% trigger press distance to 100% trigger press distance.

[@alfiemiller07]

Please bring back the 1.6/1.5 configuration for r6 the mouse movements were perfect it’s not as great as it used to be :(

[@alfiemiller07]

@xim central

[@XIMCentral]

Hey, you can downgrade your config ST to get back that version. I addressed that in a few videos, such as in the beginning of my "Competitive Apex Legends Config" video.

[@gamebreaker204]

Hi Dev Team! My problem still persists when I hold the trigger, I have watched the video on the rapid fire for xim matrix and made everything as required, however R2 shoots only once when I fully hold the trigger. Only when I slightly hold the trigger halfway it shoots rapid fire. Please help!

[@XIMCentral]

Hey, you must delete your analog trigger binding. This is what prevents the rapid fire from working when pressing the trigger more than just a little bit. If you use the new firmware its in the automatic binding tab.

[@thearchitect5405]

Do accessories connected to the console controller used to pair the XIM Nexus still function while using the XIM Nexus? Particularly curious about headphones or mics connected to the unused non-XIM controller.

[@XIMCentral]

Hey, the attached authentication controller will still work but the headphone port may not. In that case connect the headset to the audio port of the Nexus controller instead.

[@thearchitect5405]

@@XIMCentral May not, or will not? I was wondering if I'd be able to use the XIM and set this up on the authentication controller's audio port to avoid needing a bunch of wires hanging from my controller. This: kzbin.info/www/bejne/gnKVk5aoostmf5o

[@XIMCentral]

@@thearchitect5405 Hey, i wrote may not since this hasnt been tested so far and the dev team told me it could or could not work. They saw nothing that would speak against it but they could say if it works for sure. You may have to try it if the audio port of the authentication controller works or not.

[@soxcoco7860]

Thank you 🙏

[@acrobatmapping]

I think they gave me a repackaged one. the right trigger tends to continue shooting after I press it and sometimes goes off even when I don't press it. On Ashe sometimes it fails to go off when I press it or instead of reloading all bullets at one time only will reload one bullet and then stop because it thinks I'm pressing the button. The whole thing seems kind of a mess honestly.

[@XIMCentral]

Hey, most controllers ship with a too aggressive calibration. Go into the global settings and then click on calibration. First do the top calibration and afterwards the bottom one. When each are done retry and check if you still have these issues.

[@KokenyRichard]

I haven't bought the new adapter and I don't think I will, but I'm curious about rapid fire. So, can you use this on a shotgun and shoot with it as with an automatic weapon? Also, is there a chance that you get banned for absolutely demolishing everyone with a full auto shotty?

[@XIMCentral]

Yes you can do that and no you cannot get banned for using a XIM! :)

[@KokenyRichard]

@@XIMCentral I love it, also your channel😉

[@itssmarcusreally753]

i did exactly what you did but when i go on siege and hold my RT nothings changed im so confused

[@XIMCentral]

Somewhere there must be a setup error then. Check your button binding list and hold the RT button. Your XIM will then display which bindings are active, and which arent. That can help to troubleshoot the issue.

[@acrobatmapping]

I just got one of these just to mess around with. I tried to plug it into my ps4 but it never even does the initial sync turning green to acknowledge that it synced with the dualshock controller? any advice?

[@XIMCentral]

Hey, what kind of PS4 controller is it? If its the PS4 v2 controller then you must set the controller communication method to wired/USB in the console system device settings. Also try a different USB cable, maybe the one in use right now is a charging only cable.

[@uz5261]

are gonna make a vid on the new r6 season does my xim apex need a update or something ?

[@XIMCentral]

Hey, the new season hasnt changed anything in regard to the aim mechanic so no changes are required for your XIM config. Everything still works as during the last few seasons. I will make an updated RB6 config video when there are changes in the game that require a new config setup! :)

[@uz5261]

@@XIMCentral thank you!

[@Ldls82827]

How can I get the rapid fire to work without having to press R2? I've set Hold but it doesn't work.

[@XIMCentral]

Hey, its the same setup as shown in this video but instead you bind it to any other button of your choice, such as say R1 or L1.

[@PhillyPhilFaReal]

ok... So my Manager doesn't have the dial for the hair trigger under it... I mean the thing you took to 1 percent, yeah.. Its not there.

[@XIMCentral]

Did you select a "Right Trigger Position" binding or just a normal "Right Trigger" binding? The latter will not have it since its analog.

[@weederman187]

Hey, me again:) does it work with a mouse and keyboard? I did everything as in the video but it doesn't work. I don't have the switch at the top that you should set to 1%, maybe that's because I'm playing with m&k? I don't know how to do it, I've tried it for so long😫 Greeeeetings 🙂

[@XIMCentral]

Yes it also works with MnK on XIM Matrix! The setup is the very same, but instead of binding it to a Right Trigger Position with a specific percentage (say 1%) you use a left mouse click binding. You must not specify any percentages then for the trigger activation. Anything else remains the same. So the same Smart Action timeline, groups and stuff.

[@weederman187]

@@XIMCentral thank youuuu (:::

[@shayiiko]

After the new Beloader FW update the mouse does weird movements and it feels laggy.. any tips that can help me? I play R6

[@XIMCentral]

Hey, please report that in the Beloader Forum or to their Support. Maybe they must fix something within the new firmware! Other users have reported a similar behavior.

[@worthybeast3598]

hey @XIM Central my xim broke n I can’t rlly find another good one to buy from anywhere for a good price. Got anywhere n mind and or should I wait for a new mnk adapter? Thanks

[@XIMCentral]

Hey, you mean a XIM Apex? If that is what you have then i would recommend to either bring it to a local repair shop, or get a used XIM4 to gap the time until the new XIm comes out. XIM4 can often be bought for 40-60$.

[@worthybeast3598]

@@XIMCentral ok thanks 👌🏾

[@XIMCentral]

@@worthybeast3598 Before you go out and buy another one id say visit your local electronic store and ask for a repair. If your XIM doesnt work because it physically broke then they might be able to repair it (such as a broken-off USB connector).

[@worthybeast3598]

@@XIMCentral ye I was thinking about doing that but my lil bro rlly messed it up trying to fix it himself including burning it n all💀so it was more then broke. so I just used your advice n bought a xim4 for $57

[@burninspacehaze6383]

Great video! Is this possible or is there an update for XIM apex for rapid fire?

[@XIMCentral]

Hey, XIM Apex will not get Smart Actions but the new XIM mouse and keyboard adapter will. So you can use this setup for the new XIM as well.

[@burninspacehaze6383]

@@XIMCentral thanks! Do you have a link to the adapter by itself? Or will I have to buy the entire nexus set to get access to this feature?

[@XIMCentral]

@@burninspacehaze6383 The new XIM mouse and keyboard adapter is not out yet. In one of my next videos i will probably release an update on it together with a rough release date!

[@burninspacehaze6383]

@@XIMCentral awesome! Thanks for the detailed explanation

[@yntrace]

how would you add an anti recoil setup to a semi automatic script, whenever i add it as usual the rapid fire stops working

[@XIMCentral]

Hey, you must remove the fire action from your recoil scripts as that will block the rapid fire smart action to work.

[@rickwilliams6922]

@@XIMCentral what do you mean the right trigger? if you remover the fire action what activates it?

[@XIMCentral]

@@rickwilliams6922 The question was about using anti recoil + rapid fire at the same time. If the anti recoil uses a right trigger binding at its start then that will block the rapid fire smart action.

[@Kaya660]

Hey can you make new xim settings for divison 2 everything is updated and i been trying so hard to make a good one but cant figure out would be very much appreciated 👍😇🙏

[@XIMCentral]

Hey, i might do that when i cleared though all my upcoming video projects! :)

[@Kaya660]

@@XIMCentral thank you!

[@harrybarbrie7052]

Hey I’ve updated all three systems but still haven’t got access to the smart actions. When I was upgrading the controller it was flashing blue but then at the end it started flashing white beige. Can someone help?

[@XIMCentral]

Hey, did you do a factory restore update? The update is so big that you must use the factory restore option in the flashtool to update the firmware.

[@harrybarbrie7052]

@@XIMCentral yeah I literally just did it and still won’t let me access. The app tells me to connect to the controller I do it the first time but then it tells me to connect again but then when I try nothing happens.

[@harrybarbrie7052]

I’ve updated both the controller and the adapter but yet still nothing I’ve also updated the app to the testflight

[@XIMCentral]

@@harrybarbrie7052 All right perfect. For the very first connection between phone and controller please press and hold the + and - button for a while. On any follow-up connection its fine to briefly press both, but for the first one they must be held for a few seconds.

[@harrybarbrie7052]

@@XIMCentral Thank you very much I got it working :)

[@brunooliveiradasilva8637]

Hi so i just bought my Xim and im trying some settings but idk how to identify my ST like i searched a lot and i could find the 1.5 ST im trying to find the 1.7 one but idk how to verify it, cuz on ps4 is called another way cuz the 1.5 on Xbox its the 4.2 on PS4 (i know how to change it but idk which firware the 1.7 on ps4 is and how i verify it)

[@XIMCentral]

Hey, click into the config picture in the main screen of your Nexus Manager. At the top it will then display the ST version number. My "Backup & Share Config STs" video goes into more detail on that. It displays the steps for XIM Apex but they are identical to those of the Nexus! :)

[@BA3YDADDY]

Any news on The next Xim mouse adapter 🤷🏻‍♂️

[@XIMCentral]

I might post a summary video of the latest developments next week or so!

[@chaseleadingham2341]

Can someone help me it only works when I barely press my right trigger like when I push my right trigger all the way in it won’t work

[@XIMCentral]

Hey, you must do the calibration in the global settings. First the top one, then the bottom one. After that it should work without any problems.

[@chaseleadingham2341]

I did that but it still only works when I barely press it in when I fully press it in it stips

[@XIMCentral]

@@chaseleadingham2341 Hey, in that case change the activation press distances for the smart action. Use percentages that you prefer! :)

[@chaseleadingham2341]

But it doesn’t work unless it’s at 1

[@XIMCentral]

@@chaseleadingham2341 Hey, go into the global settings and then do the calibration (first the top one, then the bottom one). After that the issue should be gone.

[@Chefs940]

How you do this for the matrix on PlayStation

[@XIMCentral]

Its the very same setup, Nexu and Matrix share the same Smart Action Manager. Just bind the rapid fire onto the mouse instead of the right trigger position of you are a MnK user.

[@light-4291]

Funktioniert das auf der Matrix 1:1 genauso mit der Maus? Muss ich dann Rechtsklick binden? Oder R2?

[@XIMCentral]

Ja das Setup ist genau das selbe. Statt Die Aktion auf R2 zu belegen würdest du die linke Maustaste nehmen (sofern du M/K benutzt).

[@light-4291]

@@XIMCentral Danke 🙏

[@Rnaa7o]

You can't do this in MNK, because in the trigger you have the option of the amount (%) of force you will press to work, in the mouse it's just (click)

[@sneakydid]

Mine isnt working is there a fix for this?

[@XIMCentral]

What exactly doesnt work?

[@tayshawn6338]

Worked!!!!!

[@XIMCentral]

Awesome, enjoy! :)

[@ArtitTeandand]

Can you show advance rapid fire on xim matrix and mouse

[@XIMCentral]

The setup is the same as shown in this video. Matrix uses the same Smart Action manager as Nexus! ;)

[@chickensandwich7048]

When are y’all gonna restock?

[@XIMCentral]

Hey, XIM Nexus is currently in stock. XIM Apex will not be produced anymore (out of production for over 2 years now). Instead a new XIM mouse and keyboard adapter will soon come out! You can find two videos on it on this channel already, and in a few days i will release another one! :)

[@PengujnR6]

would this be the same for the xim matrix?

[@XIMCentral]

Yes its the very same!

[@jaylanm]

can i do this with mouse and keyboard

[@XIMCentral]

Yes!

[@thearchitect5405]

Is there any chat pad the XIM Nexus is compatible with?

[@XIMCentral]

Hey, i dont think anyone has tried that yet.

[@xmirxli]

beloader don't work after playstation5 software update today plz chek this problem

[@XIMCentral]

Hey, you must update your beloader firmware then it will work again. More infos here: community.xim.tech/index.php?topic=102107.msg884024#msg884024

[@xmirxli]

​@@XIMCentral tnx ❤️

[@jffmnz]

in my xim nexus app this watch function does not appear?

[@XIMCentral]

Hey, you must update both your XIM Nexus Controller and Manager to the latest beta version from the XIM Forum. Then you will also have these new features shown in the video! :)

[@jffmnz]

@@XIMCentral How do I update can I do it on my cell phone or just on the computer

[@XIMCentral]

@@jffmnz Hey, the manager can be updated through the phone (just click on the installation link in the XIM Forum). The controller firmware can only be updated through a PC or Mac though.

[@austin0207]

Can you adjust the rapid fire rate? The rate shown in the video makes it very obvious. Is there a way to make it shoot just above the normal timing of a weapon?

[@XIMCentral]

Yes you can, just increase the wait time in-between the right trigger shots. That will define how fast the Smart Action is pressing and releasing the right trigger.

[@carl0splays829]

Broooo this is too confusing!!! Too many group bindings, creating, deleting, sliding to the left and right. With no explanation I get lost. Never thought this would be so complicated. I need Idiot proof instructions with explanations on every click!!!

[@XIMCentral]

The video is building on prior tutorials, hence these parts arent explained another time anymore. You can find those on this channel or in the XIM Manual on the XIM website! :)

[@carl0splays829]

I know, but Im just too slow and Im not too familiar with this xim matrix thing. I was planing to use this rapid fire thing on the thunder burst smg in fortnite. But I got lost in the going back and forth in the bindinds. Thank you for the videos though!!

[@XIMCentral]

@@carl0splays829 Hey, id say as a start to have a great foundation just read through the XIM Manual. After that you will have a strong understanding and pretty much any video on this channel should make a lot more sense! Link: guide.xim.tech/Gaming-On-PlayStation-5/

[@carl0splays829]

@@XIMCentral I’ve read the guide. And I feel like it lacks further explanation, comparisons and examples . I like your group binding video and get an idea of how to do it. But I need assistance understanding how to activate aim assist, rapid fire and more things. There is not a single video covering fortnite gameplay. Content creators are missing views, likes and subs. I’ve read comments and I’m not the only one asking. Thank you for the responses! I might just return the thing and just relay on my slow reflexes. Im old and don’t have the time to git gud, just want to have fun and fight fire with fire!

[@XIMCentral]

@@carl0splays829 This is all in the manual. At the top you can change the category to "smart actions" for example: guide.xim.tech/Smart-Actions-Editor/

[@aligouzoula8840]

That works for xim matrix right?

[@XIMCentral]

Yes, its the same setup as for Nexus!

[@applehead12x95]

Do you know about PSRC and that way of using xim/ other things on ps5 ? Apparently it is much better than beloader or any other method

[@XIMCentral]

Yes i have PSRC too and it provides the lowest possible delay. However you must receive an invitation from its creator to use it and to my understanding he is currently not looking for testers unless they own x96 compute units to run PSRC on.

[@applehead12x95]

@@XIMCentral are you able to do a video on this? I think it's quite interesting that this device can provide even lower input delay that xim direct connection itself, and is there any further news on when it will be released to the public?

[@XIMCentral]

@@applehead12x95 Hey, i wont make a video on that at the moment since its creator asked me to not make any advertise for the solution yet. Its still in testing stage after all and not accessible to be public yet. Maybe this will change soon, but until then it doesnt make much sense to showcase a solution no one can really access or use right now. But yes you achieve below USB latency that way and some PSRC users have already posted comparison videos on KZbin showing the delay advantage!

[@xmirxli]

beloader don't work after playstation5 software update today plz chek this problem !!!

[@XIMCentral]

@@xmirxli Hey, you must update your Beloader firmware then it works again!

[@badaim9268]

i tried the same for the A button (xbox) but it doesn’t work, anyone know how to do that? or is just a trigger option?

[@XIMCentral]

Hey, you can also do it for the A button. The steps are the same. What will not work however is if you press the right trigger, and then on top press the A button for rapid fire. Lets say you physically press the right trigger by 80%. And you now press the A button which should send a rapid fire = a Smart Action that thends very fast 0% and 100% trigger inputs. Since you physically press the trigger by 80% already, your Smart Action can only reset back to 80%. This may not be enough for the game to reset the pull. Long story short: If you use the A button for rapid fire then it will only work if you dont press the right trigger already.

[@badaim9268]

@@XIMCentral got it, i managed to get it working, im used to steam input still kinda new with the xim nexus, need to learn how to make groups and work on that too thanks!

[@XIMCentral]

@@badaim9268 I will release a lot of videos for that in the upcoming weeks! The current video queue is almost empty, then i can release general Nexus tutorials again! :)

[@badaim9268]

@@XIMCentral amazing, i managed to put a toogle for rapid fire so i dont need to go into the app everytime, looking forward for the next videos and the next xim mouse and keyboard adapter

[@badaim9268]

@@XIMCentral why only the “previous/next config” buttons have the “toggle group” smart option? i wanted to make a toggle with “Y” for rapid with pistol and i can’t

[@amandhami3640]

I don’t have the add new binding plus button at the bottom.

[@amandhami3640]

I can’t add any new bindings not sure what to do.

[@XIMCentral]

Hey, please update your XIM Controller and XIM Manager to the one linked in the video description for these new features.

[@amandhami3640]

Hey I just updated my controller to the latest one and I have the 20220306 xim nexus manger, but the button to add new bindings are still not on my app.

[@amandhami3640]

I don’t have the smart action manger either on my app.

[@XIMCentral]

@@amandhami3640 Hey, can you go into the top right options of your manager (info/about) and post both firmware versions that it lists you there?

[@lltrasejekll3381]

In the last of us you heal with the Fire botton how can we fix that

[@XIMCentral]

Hey, what do you mean? Can you not heal when you press that button?

[@nini0935]

I've had my xim nexus for weeks now and i still can't update the controller or adapter it gives me an error on my pc, is it possible to still perform like a xim apex without the smart action feature?

[@XIMCentral]

Hey, have you tried different USB ports and/or deactivated your anti virus software? Both have helped other users in the past if your flashtool cannot detect your Nexus. Also verify that your Nexus shows a constant blue light when you try to update its firmware.

[@nini0935]

@@XIMCentral when i try to update it the blue light is solid and nothing else is connected but the controller to the pc via usb port and my pc makes the sound that it detects it but it says xim nexus not found

[@nini0935]

i already disabled antivirus and everything and it does not want to work :/

[@XIMCentral]

@@nini0935 All right i see. Please contact the XIM Customer Support then as the engineers have additional steps on what to do in such a case.

[@nini0935]

@@XIMCentral Thank you bro

[@untitled4841]

Not seeing smart action on the Android manager build 6.00.20220306

[@XIMCentral]

Hey, you must update both your Nexus controller and manager to the latetst beta firmware from July. The firmware you are using is the current gold firmware and from March.

[@untitled4841]

@@XIMCentral thank you, I realized that and already updated it successfully :) thank you for replying 🙏

[@mustafa_ahmedDx]

How can i get to this menu? Bc i can't find it anywhere in the xim app?

[@XIMCentral]

Hey, both your controller and manager version must be on the latest beta version to have these new features.

[@mustafa_ahmedDx]

@@XIMCentral I do have it last version But i can't find it If u can talk about or explain more in a vid or short it would be nice😅

[@XIMCentral]

@@mustafa_ahmedDx Hey, please double check that you updated your controller and xim manager to these two versions: community.xim.tech/index.php?board=105.0

[@mustafa_ahmedDx]

@@XIMCentral I'm sorry bc im new on xim So if i update my xim thingy The app in my phone will update automatically with it or ....

[@XIMCentral]

@@mustafa_ahmedDx Hey, you must update your XIM and XIM Manager individually. The XIM can be updated via PC or Mac (see link above) and for the XIM Manager just follow the steps from the link above as well! :)

[@ximmatrixEspañol]

hi what is the latest update for xbox series x 20211216?

[@XIMCentral]

Hey, which XIM specifically? XIM Nexus?

[@adyn410]

how you do this for the apex?

[@XIMCentral]

XIM Apex sadly cannot do this, only XIM Nexus and the upcoming new XIM mouse and keyboard adapter can.

[@notaidensoleave5422]

Is there a new way cuz it isnt working 4 me n i did the same as you

[@XIMCentral]

Hey, what exactly isnt working? What have you setup?

[@notaidensoleave5422]

@@XIMCentral the rapid fire I did exactly what you said and it didn't make it rapid fire

[@XIMCentral]

@@notaidensoleave5422 Does it work if you change the wait actions? Maybe yours are too short for the game to register.

[@notaidensoleave5422]

​@@XIMCentralI tried raising it and it still didn't work

[@XIMCentral]

@@notaidensoleave5422 So how does it look then in the game when you use it? What is happening?

[@ahmedjl9096]

Can u do it by using xim apex. ?

[@XIMCentral]

XIM Apex sadly doesnt have smart actions, so this only works with XIM Nexus and XIM Matrix.

[@SKXNOV4]

Does this work with xim matrix?

[@XIMCentral]

Yes absolutely, the steps are the same!

[@goated5709]

Will the new XIM be compatible with ps5 games ?

[@XIMCentral]

Hey, the team is currently working to achieve that! ;)

[@bnewson33]

Any ideas what configuration to use for mw2 beta ?

[@XIMCentral]

Hey, as soon as the beta is out you should be able to find the first setting recommendations in the XIM Forum! :)

[@bnewson33]

@@XIMCentral Thanx for reply on an old video. Seems recent now with cod hype. Fps games aren't looking great atm this game could be make or break , in alot of things.

[@bnewson33]

@@XIMCentral Got early access from sky vip randomly .

[@preston9547]

can you do this on xim apex

[@XIMCentral]

Hey, XIM Apex doesnt offer such a functionality but the new XIM mosue and keyboard adapter will! :)

[@reedtepen9102]

Why is my gun skipping bullets

[@XIMCentral]

If its an automatic weapon then remove the rapid fire, not every automatic weapon works with a rapid fire. Other than that tweak the fire rate of your rapid fire.

[@samo2195]

Hey man beloader is not working after updated my ps5 software 3 hours ago

[@XIMCentral]

Hey, you must update your beloader firmware then it will work again. More infos here: community.xim.tech/index.php?topic=102107.msg884024#msg884024

[@samo2195]

Tnx its working now but even with the lan connection i have some little lag after updated beloader

[@samo2195]

Is anyone have problem or its me only one ?

[@nukehacke]

@@samo2195 me too bro

[@XIMCentral]

@@samo2195 Definitely let the Beloader Support know then, maybe they must change a few more things to make it perfect again.

[@EvilXero359]

I have to ask, does the XIM change a games coding? As in allowing the user to shoot through walls, esp?

[@XIMCentral]

Hey, a XIM cannot do that. All it does is send inputs through the attached console controller to the console. It has no access to the game code.

[@EvilXero359]

@@XIMCentral thx for replying because another player I know who uses the XIM was accused of doing so. Now I can let them know that their accusers are misinformed

[@XIMCentral]

@@EvilXero359 Lol thats ridiculous and absolutly wrong, a XIM cannot do that! :)

[@Takumo47]

I thought this said apex so i clicked ultra fast 😅

[@XIMCentral]

The new XIM mouse and keyboard adapter will also have Smart Actions, so you can 1:1 use this tutorial with it too! :)

[@Takumo47]

@@XIMCentral so it will be cronus like or not

[@XIMCentral]

@@Takumo47 Smart Actions allow you to do far more than that in a completely unobstructed way for your mouse movements! :)

[@Takumo47]

@@XIMCentral you know people love macros maybe try doing that for the new xim itd be awesome

[@XIMCentral]

@@Takumo47 Hey, see my two videos on the new XIM device, it will have such features :).

[@GamingRoom2077]

Help me beloader ps5 update fix

[@XIMCentral]

Hey, you must update your beloader firmware then it will work again. More infos here: community.xim.tech/index.php?topic=102107.msg884024#msg884024

[@GamingRoom2077]

@@XIMCentral 👏👏👏👍👍👍❤️❤️❤️

[@GamingRoom2077]

@@XIMCentral beloader update mouse lag please help me

[@XIMCentral]

@@GamingRoom2077 Hey, please report that to the Beloader Support. The XIM Company cannot help you with Beloader issues, sorry. Tell the Beloader Company that you have issues so they can investigate and solve them! :)

[@XRefragzZ]

doesn’t work on matrix!!!

[@XIMCentral]

Yes it does, its the same setup process. Bind the same button sequence to your fire action.

[@XRefragzZ]

@@XIMCentral I cannot seem to get it to work on controller, maybe it’s an issue on my end

[@XIMCentral]

@@XRefragzZ Have you deleted the automatic binding of the right trigger? That will block the rapid fire from working. In my "Matrix Controller Workshop" video i show how to deactivate the automatic analog right trigger binding for the controller.

[@aligouzoula8840]

This doesn't work I don't know why, the fast T-baggin works but this doesn't

[@XIMCentral]

Hey, have you copied the same setup as shown in the video including the analog trigger adjustment? Without that the trick wont work.

[@aligouzoula8840]

@@XIMCentral Yes, when I put the right trigger position it didn't work but with the mouse left button it does work so it works for me with the mouse but I play with a controller

[@XIMCentral]

@@aligouzoula8840 Thats because you need to handle the analog trigger situation as shown in the beginning of the video. That binding blocks your controller setup from working.

[@aligouzoula8840]

At the beginning you said that you have to remove R2 because there are chances that it won't work, right?

[@XIMCentral]

@@aligouzoula8840 You need to remove the analog R2 binding. Without this step the entire setup wont work because it blocks the anti recoil from working.

[@takingdollar]

Brasil muito obrigado

[@RD48__48]

?

[@XIMCentral]

Hey, you can find a link to the full english text of this tutorial video in the video description. You can use it with a translation software of your choice (deepl.com).

[@takingdollar]

@@XIMCentral I said I'm Brazilian and I'm very grateful for sharing this great content thank you very much

[@XIMCentral]

@@takingdollar Oh ok thanks a lot for the kind words! :)

[@olssen87]

No Recoil and rapid fire on Xim Apex please 😅

[@XIMCentral]

Hey, that is sadly not possible but the new XIM mouse and keyboard adapter will also have Smart Actions and therefore can do the same as shown in this video! :)

[@olssen87]

@@XIMCentral Do you have a release date for the new mouse and keyboard adapter?

[@XIMCentral]

@@olssen87 Ill probably address that in the next info update video which should come out very soon!

[@Darkknight-119]

👏🔥

[@yadamooo7913]

In xim apex pls

[@XIMCentral]

Obsiv recently said that XIM Apex will not receive Smart Actions since its not possible. In 1-2 weeks i will probably do a new update video on the new XIM device will all recent information drops.

[@LolRoboShotU]

Mnk is one thing, but idk, this is lame.

[@XimGaming]

Sponser me with a free xim nexus so I can make reviews on my channel 👀

[@XIMCentral]

Hey man! :) Knowing you, i think the upcoming XIM mouse and keyboard adapter might be even more interesting for you! ;)

[@Lovixon]

@@XIMCentral Hi man, pls pls say when new xim gona be out, is that soon??😢

[@XIMCentral]

@@Lovixon My next update video will probably include a rough release date!

[@Lovixon]

@@XIMCentral So I'm waiting for your next video😍, don't make us wait too long🙏🏻

[@skyget2347]

doesn’t work for me on my xim matrix🥲

[@XIMCentral]

Hey, the setup is the very same for Matrix. What exactly doesnt work? Did you use the correct group switcher?

[@skyget2347]

i got it to work i just had to delete to fire keybind…… but is there any way i could still hip fire and still have rapid fire? (thanks for always replying/answering comments)

[@XIMCentral]

@@skyget2347 Sure! You can assign your rapid fire to ADS only, and add a new shooting binding that is set to HIP only. That way you can shoot like normal from the HIP, and in the ADS mode you have rapid fire. Alternatively use the setup from my "Nexus Best Rapid Fire" setup video. Its even better than that and also works with XIM Matrix.

[@IG_Ashmedeialt]

Can I do rapid fire on xim matrix using a controller?

[@XIMCentral]

Yes absolutely! I have uploaded a dedicated tutorial on that! All Matrix features also work with a controller!

[@V0NTRAPZKTL]

How u do this on the matrox

[@XIMCentral]

Its exactly the same setup. The only change could be you using MnK, in which case you bind the smart action activation buttons to the left mouse button instead to the controller RT.