XIM Matrix - Anti Recoil For Soldier and Baptiste Overwatch 2 - Smart Action No Recoil Setup

[@XIMCentral]

Link Channel Membership Subscription: kzbin.infojoin English text: controlc.com/03097459 First part (OW2 config guide): kzbin.info/www/bejne/mpeUpYmwe9GJY9k FW + Manager needed for the codes below: community.xim.tech/index.php?board=111.0 Link 1 Soldier Anti Recoil (when not on target): controlc.com/1c54ea22 Link 2 Soldier Anti Recoil (when on target): controlc.com/2c7cfdbf Link 3 Baptiste Anti Recoil (when not on target): controlc.com/056e1c91 Link 4 Baptiste Anti Recoil (when on target): controlc.com/b957a5db Buy XIM Matrix here (paid links): Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66 Amazon US: amzn.to/3DTZkFS Amazon Germany: amzn.to/3KFbsyd Amazon UK: - in a few weeks - Amazon France: amzn.to/45Pr5es Amazon Italy: amzn.to/4609Ebg All XIM Distributors & their shops: xim.tech/shop/

[@Muhannad788]

3:18 on this time did you use English text or soldier without recol

[@XIMCentral]

@@Muhannad788 What do you mean exactly? The first one used at 3:18 is optimized for no aim assist. Is that what you meant?

[@Muhannad788]

@@XIMCentral what i main what is the file you use at 3:18

[@XIMCentral]

@@Muhannad788 It is link 1 in the video description.

[@jarridb4040]

This stuff is actually so overpowered guys it's too good

[@Haunttts]

Using a matrix feels so good on soldier tracer etc but on Ashe it’s a little weird but it feels so good

[@XIMCentral]

For Ashe the upcoming Matrix firmware should fix that! ;)

[@Muhannad788]

In the last video we made three config should i use anti recoil on all of it or i make another one

[@XIMCentral]

Hey, that is fully up to you. Personally i dont use anti recoil for sniper heroes, so config 2 and 3 from the previous video dont have any anti recoil. The first one is what i use for Soldier or Baptiste. I have added the Soldier anti recoil for it, and in another config with the same settings i have the Baptiste one in it.

[@matty6171]

I’m on Xbox and the bap (when on target) smart action pulls down a tiny bit too much - how do I manually decrease the amount of pull down?

[@XIMCentral]

You reduce the percentages in the smart action timeline (deg/s in the new Matrix firmware).

[@matty6171]

⁠@@XIMCentral hi I tried reducing the recoil percentages - this causes the three bullet burst to become too spread apart, I believe the problem isn’t to do with the recoil percentages but instead to do with the time between bursts that is causing the aim to pull down. I cannot figure out how to fix it, do you have a solution?

[@XIMCentral]

@@matty6171 Do you have the variance clock set to red so timings arent randomized to some extend? You should only be required to adjust all percentage by a flat multiplier to have the same output on Xbox as on PSN (video is on PSN).

[@andresmendoza2607]

good contribution ..and clear explanation ..in my case I don't have xim matrix but I do have xim apex combined with cronuzen I did some time ago for a medium compensation between aiming at the enemy or aiming at the void or surroundings so that the recoil In both cases it is easy to control both aiming and shooting at the enemy and aiming and shooting in the air... it is also good to try to reduce the enemy's magnetism bubble as much as possible to deal with this issue... that would be another I was afraid to handle it with the ballistic curves and sensitivities... it would be something a little more complex, but with time and patience it can be achieved. The issue is that for each one the sensitivity is different. It is up to each one to look for it

[@XIMCentral]

The good thing with Matrix and Nexus is that the sensitivity will always be the same, so that removes a lot of work. You must only copy what is shown in the video and it is guaranteed to work! :)

[@suki5630]

why doesn’t my assign buttons work? it won’t let me change the config i want to run without selecting within the all which takes forever

[@XIMCentral]

Hey, close your Matrix manager and make sure the nav mode is active when using config hotkeys. Otherwise it wont work.

[@suki5630]

@@XIMCentrali can only set it into nav mode then cycle through the configs, can’t seem to get it so i can just press 1 or 2 and it load automatically

[@XIMCentral]

@@suki5630 You can do that with the upcoming beta firmware. Alternatively use a smart action with the "load config slot" action to instantly load a config with a single button press.

[@drinkfreely]

one thing I’m confused about when setting up anti recoil is what works with the horizontal recoil and the vertical recoil. Is there any way you can explain what helps with what?

[@XIMCentral]

Hey, what do you mean exactly?

[@Noah-ey5qm]

I just ordered the xim can't wait to use it

[@XIMCentral]

Let me know how you like it, and definitely update your XIM firmware to the new beta one once you received it! :)

[@Noah-ey5qm]

@@XIMCentral Can I update the xim firmware without a PC or a laptop? can I do it on phone?

[@XIMCentral]

@@Noah-ey5qm You can only update the XIM firmware via PC or Mac. In the future maybe also through its Ethernet port, but for now only via PC or Mac.

[@XIMCentral]

@@Noah-ey5qm You can only update the XIM firmware via PC or Mac. In the future maybe also through its Ethernet port, but for now only via PC or Mac.

[@Kriggy-]

I want to use for controller and it just says input unavailable what do i do

[@XIMCentral]

Hey, where does it say input unavailable? Also have you watched the controller setup guide from the XIM website already? Maybe it is helpful to you: xim.tech/instructional-videos/

[@MrRockstar372]

Will this specific 'anti recoil' still work WHILE using the newer "apex" smoothing in the upadated version of xim matrix

[@XIMCentral]

That will continue to work as intended! :)

[@MrRockstar372]

@@XIMCentral subscribed!

[@XIMCentral]

@@MrRockstar372 Thanks man, much appreciated! :)

[@Angelo-de1gt]

It says invalid binding format and i'm running 7.00.20230619 on PS5

[@XIMCentral]

Hey, you must update your Matrix firmware. This video has been created with a newer firmware.

[@reloadeedbrasil6364]

when will it come out for sale in the big Aliexpress and shoope stores

[@XIMCentral]

In 2-3 weeks the XIM Distributors get their stock, maybe those sell on these platforms too. The XIM Company doesnt though, it only sells through the XIM Store.

[@Chris_p_Bacon72]

Excellent video Od1n you are so helpful! I took a chance and pasted this into my splitgate config on Xbox, and guess what it works really well removing a lot of recoil from the AR and SMG! I have been practising smart actions with other configs and although I am starting to understand the angles and how much weight to add, I'm struggling a little with what values to add in ms.

[@XIMCentral]

Happy to hear that! :) A few weeks ago (like 3-4 or so) i uploaded a general anti recoil guide which shows exactly how to figure out the perfect delay values. You basically make the smart action move into a different direction on purpose to find the best timing. The video will show you how to do that, you can find it on this channel! :)

[@Chris_p_Bacon72]

@@XIMCentral Great thank you I have watched your video and it is really helpful!

[@XIMCentral]

@@Chris_p_Bacon72 Thanks man, always great to hear that the videos are helpful! :)

[@MarkGoLions8]

I can’t connect xim matrix to my phone it says it needs a upgrade but I upgraded to the latest one

[@Abozhrh27]

Same

[@XIMCentral]

You must use the app from the XIM website (link in the video description). You cannot use the app from the app store anymore, that one is older.

[@PaPaGiiZMOFTW]

Its like the normal recoil now. Just in the opposite direction. (Yes I copied and pasted the codes). Also why do the hotkeys not work? I set my profiles to 4 different keys. I push them and it shows it on the feedback input but it does nothing

[@XIMCentral]

Hey, i have released a video with updated values for the latest ingame adjustments to Soldier and Baptiste.

[@mikq65]

And is the Ximm Matrix (newer and better ) than the Ximm Apex ?

[@XIMCentral]

Matrix is the latest XIM Model, XIM Apex is out of production for like 3 years now so discontinued.

[@jlel4303]

How do I set the settings? In xbox I want a link or a site that provides settings

[@XIMCentral]

Hey, what do you mean exactly?

[@Rozen01]

When using xim apex, it was possible to switch between Ash and Widow settings with a single key, but how can I switch settings with a single key when using xim matrix?

[@XIMCentral]

You can do that by using Smart Actions. Create s Smart Action in your Ash config and bind the Config Switcher Action to it. Have this one direct to your Windowmaker config. Then do the same in the Widowmaker config but make it point to the Ash config. That way you can switch configs without Nav Mode whenever you want to! :)

[@Rozen01]

@@XIMCentral Could you tell me how to do it? Also, is there a way to always enable orbital aim assist without using the X key?

[@XIMCentral]

@@Rozen01 Hey, for a guide on how to do that just see my Nexus Overwatch 2 config video. I show exactly that there, how to use a config switcher action to instantly switch between two OW2 configs. Works the same for Matrix too! :) As for the orbital aim assist, no you must always activate it uppon start. There is currently no option to have a smart action to run by default. You must always activate them for now.

[@b_mx]

we need one shoot rodhog and reload cancel reaper

[@Elieli09]

You’re so bad that cant make it yourself? xd

[@phugs8705]

Hey 0d1n are you planning to finish the R6 no recoil for all operators???

[@XIMCentral]

Yes! Next part should be out in August.

[@phugs8705]

@@XIMCentral thanks!!!

[@Dustmaker]

Why is is sold out. Been looking the last 1-2 month every day. Shit

[@XIMCentral]

It has been sold like every second day over the last month, and each time the store opening was announced a day before on Twitter and in the XIM Forum. New units will arrive in 2-3 weeks. Id say follow my Twitter or the XIM Forum to always know when the next sale occurs! :)

[@Dustmaker]

@XIMCentral Long time ago I clicked the box that said something about "inform me when it's back in stock" and put in my email..I have not got a single one. How many do you get produced each time ?

[@XIMCentral]

@@Dustmaker Its a first come first served list, depending on when you signed up to it a lot of people will get notified before you first. In 2-3 weeks the next batch will arrive, until then its currently sold out. Follow my Twitter or the Matrix Rollout Topic to always know when the next sale occurs! :)

[@muneefqadiri]

After the leats update my matrix setting in overwatch 2 have been change it dosent fell the same how can i get it back plz hellp fast and thanks

[@XIMCentral]

If the game has changed the aim assist or aim mechanic then you cannot do anything against that with your XIM settings. The XIM game config of OW2 would need to be updated.

[@willwood2360]

Can you do modern warfare 2 config and recoil example

[@XIMCentral]

That will come in the future!

[@mikq65]

DId the XIMM Matrix replace the XIMM Apex ?

[@XIMCentral]

Yes! :)

[@boulexali5794]

when will there be stock of the xim matrix and for France?

[@XIMCentral]

In 2-3 weeks probably.

[@daraghus7338]

3:30 These settings do not appear in my program

[@XIMCentral]

With newer firmware versions the UI will look a bit different, but its the same functionality and copy code.

[@daraghus7338]

Can you do us the Overwatch 2 settings with the new program?​@@XIMCentral

[@XIMCentral]

@@daraghus7338 The settings are the very same and havent changed, just the new manager looks different.

[@daraghus7338]

@@XIMCentral Even if I wish you would work on Overwatch 2 settings for the new manager 🌹 I appreciate your efforts and continuous support for this piece. 💚✅

[@XIMCentral]

@@daraghus7338 Nothing has changed since my last OW2 config video, it would literally be the same settings! Only idiots tweak their settings all the time, find something that works really really good and then stick to it until a change in the game forces you to make adjustments! :)

[@FirstLast-sd7co]

Im getting some input lag when I’m playing with a ps4 controller on the xim matrix. How can I fix this?

[@XIMCentral]

Change the polling rate from Standard to 1000Hz in the connectivity settings of your manager.

[@FirstLast-sd7co]

@@XIMCentralThank you!!

[@acrobatmapping]

Anyone have a good explanation for how we do an xbox multiplier, and also what that multiplier should be?

[@XIMCentral]

With RB6 its 0,57 maybe it also works for OW2! :)

[@owencastellone1910]

hi i bought a xim apex a few days ago but it doesn't connect to my ps5 please do you know how i can do it could you tell me some methods?

[@XIMCentral]

Hey, are both your Matrix and PS5 connected to your router? Also did you watch the PS5 Setup video from the XIM website (instructional videos)?

[@owencastellone1910]

@@XIMCentrali have the apex one

[@XIMCentral]

@@owencastellone1910 XIM Apex isnt PS5 compatible, you can however play PS4 version games on it. If you want to play PS5 games you must either use one of the PS5 workarounds for XIM Apex (see my videos on that) or use a XIM Matrix instead.

[@owencastellone1910]

@@XIMCentral last question sorry so i can play ps4 games on ps5 but connecting a ps4 joestick right?

[@XIMCentral]

@@owencastellone1910 Yes exactly, you connect an original Sony PS4 controller to your XIM Apex (port 3) and your mouse and keyboard go to port 1 or 2. Then you can play the PS4 version on the PS5. For PS5 games see my previous comment above.

[@i973-]

Can we use both soldier anti recoil when on target and not in target in the same config?

[@XIMCentral]

Sure absolutely! But you would need to cycle through those manually then. Your XIM doesnt know what is happening in the game, so you must switch between those by yourself.

[@i973-]

@@XIMCentral ok thanks, also I need no recoil for Black Ops 4 can you help me?

[@XIMCentral]

@@i973- Sure this guide will show you how to dial in anti recoil for any game, including CoD BO: kzbin.info/www/bejne/jILCZpyqhJeNjNU

[@i973-]

@@XIMCentral can you do it for me? It’s very hard I tried many times😅

[@XIMCentral]

@@i973- I dont have the game, sorry :(.

[@TOKONOMA_Gaming]

Is there a way to have smart actions repeat automatically while pressing certain keys on the keyboard?

[@XIMCentral]

Yes thats possible, its called toggle and can be found in the activation menu of the smart action manager (at the very top). You have plenty of toggle options there, such as on press, on release, and many more.

[@OmarHarbi-y3d]

Did they solve the headset problem? (The aux headsets)

[@XIMCentral]

A new beta firmware that will solve this will be released in the next few days!

[@iMigzL]

Are you still releasing the part 2 to the recoil for rainbow 6?

[@XIMCentral]

Yes i have one more tutorial to work on and then part 2 will come!

[@yusf821]

Hey bro, I have a question for you I connected my PS4 controller to do my PS five lan cable xim matrix he’s working?

[@XIMCentral]

Yes you can use your PS4 controller in PS5 games when using XIM Matrix.

[@andrewsmith9241]

Quick ?, So I just got the vaxee npo1s and despite it being a 3395 sensor, it has preset dpi options that top at 3200, I know this was done on the apex...is it still a good amount for the matrix? Seen some comments suggesting more like 12k+

[@XIMCentral]

Oh absolutly, thats a great value! Some of the Matrix features benefit from using more DPI as you give the Matrix more data with which it can work with. But honestly the difference between 3200 and 10.000 DPI is really minimal. If your mouse doesnt offer more then its not like you are missing out on something!

[@alexshirilla3904]

This anti recoil on soldier no longer works, it goes up now and it didn’t before beta. Also it’s impossible to make my own with the workshop because I’m on console and the bullets don’t stay.

[@XIMCentral]

Hey, just tried it and the recoil is still the same. What console are you on? As for the workshop use screenshots or record a video to know where the bullets went to. Alternatively use the manual way as shown in my advanced XIM Matrix anti recoil video.

[@alexshirilla3904]

@@XIMCentral I’m on xbox and if you shoot the head of Winston in the practice range it slowly goes up. It didn’t do it before the beta. It’s still decent but it def goes up now. I’m referring to the on target soldier76

[@XIMCentral]

@@alexshirilla3904 Its probably because you are on Xbox and these values are made for the PS5. On the PS5 it stays perfectly still, no movement. The sensitivity and stick resolution on Xbox is slightly different so you have to adjust the magnitudes a bit.

[@alexshirilla3904]

@@XIMCentral I don’t know which magnitudes to justify.

[@alexshirilla3904]

@@XIMCentralidk it just really really sucks how this video is super old and there still isn’t a single person who has shared the xbox magnitude. Wish you guys would help us

[@FM__]

What is the best dpi for XIM apex ps5

[@XIMCentral]

With XIM Apex usually 3000-4000 DPI is the best.

[@Mohammad-oz5ui]

Hi xim central i want to know why i cant do 360 with the mouse i fell the sens is very slow what can i do

[@XIMCentral]

Every console game has a maximum turnspeed that you cannot exceed. The one of OW2 is very slow. If you move your mouse faster than that then the game will ignore it and your XIM shows a red blinking. Either move your mouse slower, or reduce your XIM Sensitivity to avoid this problem. This cannot be fixed, its how console games are programmed.

[@VaporwaveTravler]

Is it possible to connect a flight stick setup on the xim matrix? I want to use dual flight sticks (hosas) on my Xbox series X.

[@XIMCentral]

Matrix recently received a new beta firmware which adds DInput, which is what most of these devices use. So yeah you might be able to do that now. Im writing "maybe" because no user has shared any feedback on that yet so i cannot confirm it.

[@VaporwaveTravler]

@@XIMCentral what made would that theoretically be? Mouse and keyboard mode or game pad mode?

[@XIMCentral]

@@VaporwaveTravler What do you mean?

[@VaporwaveTravler]

@@XIMCentral I meant to say mode, when picking your config for a game. Do you put mouse and keyboard or gamepad and mouse ?

[@XIMCentral]

@@VaporwaveTravler Oh i see. In your case pick Mouse + Gamepad. That config will let you use any supported device, so there are no restrictions as with Mouse + Keyboard. You can use mouse + keyboard + controller + whatever is supported with a Mouse + Gamepad config.

[@guillermovazquez5459]

When would yo do a video like this for mw2?

[@XIMCentral]

I will cover CoD and many other games in the future as well!

[@vurmise]

Can somebody tell me what precision, response, and easing do on xim matrix?

[@XIMCentral]

You can look them up in the XIM Nexus Manual from the XIM website: cloud.xim.tech/Release/XIMNEXUSUserGuide-20211216.pdf

[@c0wmartyr]

I have orbital aim assist and anti recoil on, will multiple bindings on one profile effect it negatively?

[@XIMCentral]

That is perfectly fine and wont be an issue, your XIM is calculating all of that before adding your aiming inputs on top! :)

[@YourFavoriteStreamerUsesDMAs]

The matrix is the only device that lets you use 0.2 actuation points in game without cracker box movement allowing you to have wooting analog feel. Im sure the wooting does the same but this is game changing. People buy Strikepacks/Cronus's for competition mode/ability to use different controllers. If the general public knew you could use the lowest actuation points possible I think it could possibly increase the sales for the casuals that want analog feel and nothing else; lots buy Cronus's just to use different controllers. Same rules apply now 💡

[@XIMCentral]

Do you mean the deadzone customization for a controller in the Matrix config?

[@lvaldes1]

guys how do i get anti recoil on controller. i’m having trouble trying to set this up. or get that extra aim assist too. i need that

[@XIMCentral]

Hey, theoretically you must only create a "Gamepad" config for OW2 and then insert the smart actions from this video. Then change the activation button of the smart action at the top to the R2 button (press and hold it). If you prefer a longer explanation just watch my "XIM Nexus OW2 Config" video. Its steps are 1:1 the same with Matrix + Controller when picking the "Gamepad" config! It also shows how to setup anti recoil!

[@SalizardJ]

i copied the baptiste anti recoil for no target and its going down too much. what can i do to fix this

[@XIMCentral]

Hey, reduce the magnitude by which your smart action pulls down the recoil. Did you use the copy and paste code from the video description?

[@hsgw8870]

Is there an anti-recoil setting in Xim Apex instead of Matrix?

[@XIMCentral]

XIM Apex doesnt have any good anti recoil, only XIM Nexus and XIM Matrix.

[@Hazeori]

I don't have a xim but I do have a titan two, how would I put a soldier 76 anti recoil script on it

[@XIMCentral]

Im not sure tbh, i dont have a Titan 2 anymore sorry. I would consult the T2 Forum on that maybe.

[@97Chazzy]

do you suggest i make new configs if i were to play 76 and bap? as i currently only put the 76 anti reocil with my "main" config

[@XIMCentral]

If you plan to play lots of heroes then yes id say use different configs.

[@LariSousa-w9c]

Hey I have a question hoping you can help me out I’ve been trying to connect my mouse and key to the adapter using a wooting keyboard I went to the wooting app and switched everything I was suppose to as shown in the forums but when I get in game I cant walk with wasd and use my mouse or the other way around I can aim and shoot with my mouse but can’t move around with keyboard would any suggestions? Thank you for your time!

[@XIMCentral]

Hey, did you create a Mouse + Gamepad config? And did you switch your Wooting profile to your analog one once it has been connected to the XIM? Wooting will load the default digital profile so you must manually switch with FN + whatever key you assigned to it.

[@raidentesla]

Do i have to re apply these settings everytime i swap from soldier or bap

[@XIMCentral]

Hey, what do you mean with reapply? I would suggest to use different configs. One for Soldier, one for Baptiste, and one for other heores. With the config hotkey feature you can then switch into these configs with a single button press. So you must not edit configs everytime you want to play a different hero.

[@NM-vj8nc]

Do i need two separate Manager configs to use 1 for Soldier and 1 for Baptiste or? Cause the smart action bindings are different right?

[@XIMCentral]

Both is possible. The easiest way would be two seperate configs, but you can also use groups within one config. For the latter see my XIM Matrix Groups Tutorial video!

[@maziad8136]

Its ok if i plug the controller with xim or no need to plug it?

[@XIMCentral]

Hey, which console specifically? And do you want to play with MnK or with a controller?

[@Noah-ey5qm]

Hi i have a question So if i have a xim without M&k do i still get the anti recoil and aim assist? Do i get the full advantage for using a controller? or not Thank u

[@XIMCentral]

All XIM Matrix features also work with a controller, and yes you can also use an orbital aim assist with a controller if you want to!

[@lIMuzan.]

i have a xim matrix im playing on my controller, unfortunately i don’t have mnk, i did the anti recoil setting on soldier and nothing happened, i don’t know why, is this only working on mnk?

[@XIMCentral]

Hey, you do it in the same fashion as shown in this video but instead of binding it to your left mouse button you bind it do a right trigger position binding. See my Nexus OW2 Config video for details, its the same setup as for Matrix + controller. Also your ingame settings must be the same as in this video or else the recoil effect will be lower.

[@Oqwah]

whats going on with the matrix why has it not been out

[@XIMCentral]

Already sold out and the next big batch will arrive in 2-3 weeks! :)

[@highskillx7585]

Why does it said invalid code format? I already have everything updated to latest

[@XIMCentral]

Hey, when you go into the top right options (info/about) can you post both firmware versions that it lists you there?

[@ManDoAmeenOfficial]

Can you add fortnite the old version before linear and exponential to xim apex because on pc now you can play the OG fortnite on pc and the new configs are very bad for the old fortnite lock mechanism .. add the old Fortnite season 7 especially config

[@XIMCentral]

Hey, please post this in the XIM Forum so the responsible person for ST creation can check out your request.

[@ManDoAmeenOfficial]

@@XIMCentral idk how to do this actually .. can you provide any help for me about that .. inform the guys who are responsible for my request ??

[@XIMCentral]

@@ManDoAmeenOfficial It is sufficient to post your request in this topic. You may get a potential question or two then: community.xim.tech/index.php?topic=30363.0

[@KhaledH-f6x]

Why if copy code and i past it on app ، It appears to me like this ((invalid config format!

[@XIMCentral]

You must use the new Matrix beta firmware and beta manager or else the code wont work. If you dont want to update you can manually create the smart action ofc.

[@Mrj-cp7hc]

@@XIMCentral me to (invalid config), the application is on the latest version

[@XIMCentral]

@@Mrj-cp7hc You must use this one here: community.xim.tech/index.php?topic=108969.0

[@Mrj-cp7hc]

@@XIMCentral thanks

[@Idkmsrrf]

Can you setup these smart actions for controller as well so I can get 0 recoil on these heroes when I play on controller @XIMCentral

[@XIMCentral]

Yes absolutely! Matrix supports controllers too and you can use the very same smart actions as shown in this video as well (and they will work in the very same way). Just change the activation button to your right controller trigger for example.

[@christhetrader3984]

Can you do it for controller no one has the multiplier

[@XIMCentral]

Oh yes absolutely! If you are on Playstation you must not use a different multiplier, its the same one for mice or controllers. Only on Xbox you would need to use a different one!

[@AmAzInG-pp4ch]

When will be xim matrix next drop?

[@XIMCentral]

In 2-4 weeks probably, its currently being produced!

[@AmAzInG-pp4ch]

@@XIMCentral Okey thanks. I have a question about xim apex can i play only with controler on ps5 with no recoil?

[@XIMCentral]

@@AmAzInG-pp4ch Oh yes absolutly. Matrix was made for both controller and MnK users. So all of its features work with any of the two! If you want to use anti recoil on a controller then thats absolutly no problem. Also the setup steps for controller and MnK are the same, so you can follow any of my anti recoil videos! :)

[@AmAzInG-pp4ch]

@@XIMCentral Thanks i will be waiting for restock. I dont need beloader for ps5 when i get xim matrix ye?

[@XIMCentral]

@@AmAzInG-pp4ch Yes exactly, Matrix is PS5 compatible!

[@Idkmsrrf]

Can you show how make this smart action with controller? Im new and very confused i will appreciate any help

[@XIMCentral]

Hey, its the very same setup just bind the smart action to a right trigger position binding instead of the left mouse button. Everything else remains the same! :) See my XIM Matrix Controller Workshop Tutorial video for more information.

[@cc-qe5276]

I can play on a wireless mouse or it must be wired ?

[@XIMCentral]

Both is fine!

[@jayespina9667]

when can i buy the new xim still says sold out

[@XIMCentral]

Next batch will arrive in 2-3 weeks! :)

[@Ojkhoori]

Thanks for the great explanation but it doesn’t work with me I only connected mouse usb but it doesn’t work can u help me out and if it’s possible can u do a tutorial only for the ps5 controller

[@XIMCentral]

Hey, what are you trying to do and what exactly doesnt work?

[@Ojkhoori]

@@XIMCentral i copied the code and paste it but it only works with the mouse and keyboard not the controller

[@Ojkhoori]

@@XIMCentral I tried for both solider and bap but it only works when I shoot in the kbm not the controller

[@XIMCentral]

@@Ojkhoori Did you delete your normal analog trigger binding and then insert the code into a new Right Trigger Position binding? See my Nexus OW2 config video for a step by step guide. Its the same setup for Matrix + controller.

[@Ojkhoori]

@@XIMCentralok I will try it out

[@qiopx5562]

it just says invalid config format when i do soldiers one

[@XIMCentral]

You must update your XIM and Manager to the new beta firmware for these codes to work.

[@amalyade9272]

@@XIMCentralthis happened to me and still didn’t work

[@amalyade9272]

@@XIMCentralwhat should i do?

[@XIMCentral]

@@amalyade9272 Check that you updated both your XIM firmware via PC or Mac and also updated your manager. You cannot use the manager from the app store anymore, instead you must use the one from the XIM Forum.

[@harter_Hammer]

Hi i cant copy the anti recoil settings. If i copy it there comes the message invalid config format. Can you guys help? (I Play on Ps4)

[@XIMCentral]

Hey, you need to update your XIM Firmware and Manager to the new beta one.

[@shursai7527]

@@XIMCentralhey it still doesn’t work

[@XIMCentral]

@@shursai7527 What exactly doesnt work?

[@harter_Hammer]

Hello Xim Central can you please create a smart Action for the ashe unscope scope combo

[@XIMCentral]

I think i already saw this in the XIM Forum (Shared Game Configs).

[@harter_Hammer]

@@XIMCentralive looked there already but didnt find it do you have a link maybe

[@slamhin749]

Anyone know a method to get off mousetrap or avoid it or anything

[@XIMCentral]

Use Matrix + the latest beta firmware, no traps then.

[@Noah-ey5qm]

For some reason the code doesn't work I have the newest version of xim matrix and everything Need help please

[@XIMCentral]

Hey, can you go into the top right options (info/about) and post both firmware versions that it lists you there?

[@Noah-ey5qm]

​@@XIMCentral7.00.20240219

[@Noah-ey5qm]

​@@XIMCentralU here?

[@XIMCentral]

@@Noah-ey5qm What do you mean?

[@Noah-ey5qm]

@@XIMCentral 7.00.20240219 is the code u asked me to post it

[@aftmeatballsaft9914]

When you making part 2 no recoil for r6?

[@XIMCentral]

It should be out in August. Any weapons you would ike to see?

[@aftmeatballsaft9914]

@@XIMCentral MP7

[@bradguynam7887]

Hey man so with the Matrix I need 2 lan cable ports open on my router? One going to the matrix to router and one from p5 to router?

[@XIMCentral]

Yes, however you can use use only one port on your router if you use a cheap network switch for 20$ (Netgear). You connect both the PS5 and Matrix to the switch, and the switch is connected with one cable to your router.

[@bradguynam7887]

@@XIMCentral hey bro I have a question I got the matrix and I’ve set the dpi in the manager to 12000, but my mouse movements are super slow unless in the 1000 values sens. Do I need to change my mouse dpi on my computer to a high value as well?

[@XIMCentral]

@@bradguynam7887 Yes, you must change your mouse DPI via the PC manager. The DPI option in the XIM config only lets you tell your XIM how much DPI you run on. Your XIM cannot change your mouse DPI value.

[@Circus_Badger]

does this also work for linear or is it an exponential exclusive??

[@XIMCentral]

Works the same for linear, but you will have to adjust the magnitudes most likely. The timing will remain the same.

[@stayle9947]

Hi, can i get a ban when i use xim matrix ps 5 apex legenda?

[@XIMCentral]

You cannot get banned unless you violate the ToS of the game by for example being toxic to teammates and such.

[@MC7O]

I play in controller not mouse and keyboard can i do this?

[@XIMCentral]

Yes absolutely! Anything shown in this video also works with a controller, you must just use different button bindings! For the anti recoil you are required to use the same ingame settings as me though (recommended XIM ingame settings). See my XIM Matrix General Controller Tutorial on what minimal changes you must make (its basically just stick sensitivity and bindings).

[@muneefqadiri]

The link dosent work in my matrix do u have new one

[@XIMCentral]

You mean the firmware link? Sure i will update it!

[@Mr.Daylighted]

yo wsg with the mt on R6. i have SAB cranked up but it ain’t working

[@XIMCentral]

You must use the Matrix Beta SAB.

[@Mr.Daylighted]

@@XIMCentral i’m on apex

[@Mr.Daylighted]

@@XIMCentral and on the apex i have the beta sab activated

[@XIMCentral]

@@Mr.Daylighted I can only talk about Matrix since i havent used Apex in months now. Apex doesnt have the hardware power of Matrix so it cannot run the better SAB. So yeah theres a good chance that its not sufficient. With Matrix you wont have any issues though.

[@Mr.Daylighted]

@@XIMCentral how long you think it’s gon be till matrix is back

[@shursai7527]

it won’t let me copy and paste the anti recoil

[@XIMCentral]

What error message do you get?

[@shursai7527]

invalid condig format@@XIMCentral

[@XIMCentral]

@@shursai7527 Hey, that means you must update your XIM Firmware and XIM Manager to the new beta one. The video was created with that firmware and the code doesnt work with older firmware versions.

[@shursai7527]

@@XIMCentralhey bro i have the newest recent beta firmware the one that dropped 12 days ago, and it still doesn’t work

[@XIMCentral]

@@shursai7527 Hey, can you go into the top right options (info/about) and post both version numbers that it lists you there?

[@ahmedalkharji7639]

I cant make it 0.4 only 0.04

[@XIMCentral]

Hey, what exactly do you mean?

[@RaM-oj3pr]

what you will do about ow2 news

[@XIMCentral]

Not much must be done from what it looks like. XIM has prepared for things like that for years now, and so far none of the games that have anti MnK mechanics can exclude Matrix.

[@nikovaltteri]

When is next restock

[@XIMCentral]

In 2-4 weeks probably, new stock is currently being produced!

[@oddworldo]

Bap is didn’t work in mouse and controls -anti recoil )why

[@XIMCentral]

The values shown in this video are for PSN. Are you mayb on Xbox?

[@oddworldo]

Ps5 ​@@XIMCentral

[@XIMCentral]

@@oddworldo What firmware are you on? If its the new one with deg/s instead of a magnitude percentage then copy paste the smart action codes instead.

[@NikPoire]

Can you make a video on Destiny 2 Xim Matrix Settings?

[@XIMCentral]

That will definitely come in the future! :)

[@wrinklysoldier5244]

Can you please do one for xbox? It isn't very fair that playstation users get provided this, while xbox doesn't. I believe we paid the same price for the XIM.

[@Bullet523]

This isn’t an official xim channel, he runs it in his spare time and obviously mainly use his PlayStation, and it makes no sense for him to make a video just for Xbox players. When the difference is a minimal that people can figure it out themselves. And I am an Xbox player

[@Jc123jcjc]

Entitled

[@baharv4575]

I keep saying this. Like wth! Their isn’t any Xbox XIM Matrix videos.

[@XIMCentral]

All you must do is to reduce the magnitude by a certain percentage. Say Xbox is 20% faster, then you divide every magntiude by 1,20. Wait actions and everything else must not be changed.

[@maziad8136]

We need modern warfer 2 please

[@XIMCentral]

That and many more game config tutorials will follow soon!

[@URDWNF4LL]

Will you please when you have time make a config video for Destiny 2 or if you already had one planned awesome?!

[@XIMCentral]

@@URDWNF4LL That will come too! :)

[@URDWNF4LL]

@@XIMCentral awesome!!

[@Playing-iw-From-africaaa]

@@XIMCentralplease my Xbox 360 controller is wired but doesn’t connect to Xim apex are they two different ones? Also was the old Xim edge only up to 125hz ?

[@moon2800]

I am a controller player on PC, does it work?

[@XIMCentral]

Yes it does! :)

[@avgrezefan]

Bap one doesnt work it keeps going down

[@XIMCentral]

Are you on Xbox? If so you must adjust the magnitudes.

[@Hey13245]

invalid config format, need the new link please

[@XIMCentral]

Here you go, update both the manager and the XIM firmware: community.xim.tech/index.php?topic=108969.0

[@Nizz212]

Why does the anti recoil drive my viewfinder down?

[@XIMCentral]

Hey, that is explained in the video. Its the AA slowdown not being present when aiming off-target.

[@Nizz212]

@@XIMCentral even when the aa is off it goes down

[@XIMCentral]

@@Nizz212 That is normal because the AA slowdown is gone. The slowdown affects your anti recoil. This is explained in further detail in this video.

[@yusf821]

If I download xim matrix app on App Store we have any problam?

[@XIMCentral]

Hey, what do you mean with problems?

[@yusf821]

@@XIMCentral like that xim apex manger on ios his not have a SAB sitting but i change it To android android has A SAB SITTING

[@XIMCentral]

@@yusf821 The app store manager is older and doesnt have the new SAB feature. You must manually download the new manager from the XIM Forum. You cannot use the one from the app store anymore if you want the latest SAB feature.

[@yusf821]

@@XIMCentral for xim Matrix same

[@yusf821]

And im sorry I asked you so many questions I have the last question I am connected to my account, the xim matrix on remote control and how i play in my friend account with xim matrix ?😊

[@melih0304]

It doesn’t work by me for the soldier and bap at all

[@XIMCentral]

See the video for why this can be the case. You must use the correct XIM + ingame settings plus the console also matters.

[@melih0304]

@@XIMCentral i have the xim matrix and play on ps 5. Whenever I shoot the gun slowly aim down and the aim assist doesn’t work correctly but just for soldier…..

[@XIMCentral]

@@melih0304 Im not sure what you mean, can you describe it in more detail?

[@melih0304]

@@XIMCentral like when I use the 2 recoil scripts it doesn’t work. So I used another one from the xim website but with this the recoil is now reversed and goes slowly down until I’m on a target 😞

[@XIMCentral]

@@melih0304 You must use the same settings as shown in this video. Also what console are you on? This is made for PS4 and PS5.

[@c0wmartyr]

Is there a way to replicate this to xim apex?

[@XIMCentral]

XIM Apex doesn't have smart actions so there is no real way (other than maybe using XIM Link with autohotkey via a PC).

[@The_Questionaut]

Hey where can i find information on how to deal with mousetrap on rainbow using the xim apex? What are the best sab settings to use to avoid MT?

[@alessandrobalbo6545]

r6 sucks come to ow

[@Tuplicate]

Can you do one for rust console please?

[@XIMCentral]

I dont have rust but when i get it then definitely!

[@Tuplicate]

@@XIMCentral if you have Xbox game pass I believe it’s free on there

[@XIMCentral]

@@Tuplicate I sadly dont have a Xbox right now but that is good to know tbh!

[@DaGuyyy281]

When releasing uk?

[@XIMCentral]

Matrix is already out in the UK and can be bought from the UK XIM distributor ADZ Distribution.

[@raidentesla]

Dude no one has said what the xbox multiplier is

[@XIMCentral]

Maybe someone in the comments did, in the video it hasnt been mentioned.

[@acrobatmapping]

ya idk what it is either lol

[@XIMCentral]

@@acrobatmapping I think someone wrote in the comments a while ago that its along the line of 0,57 or so.

[@Noah-ey5qm]

I dont think this work for controller i have try it but it doesn't work for me i need help ......its was too complicated

[@XIMCentral]

Hey, works the same for controllers but you need to bind it to a right trigger position binding. Where exactly did you get stuck during the setup?

[@Noah-ey5qm]

Everything lol tbh since I'm new to xim

[@Noah-ey5qm]

How do u do that? I need help​@@XIMCentral

[@Noah-ey5qm]

​@@XIMCentralwhen I copy the code it said input unavailable

[@XIMCentral]

@@Noah-ey5qm Hey, can you go into the top right options (info/about) and post both firmware versions that it lists you there?

[@nuca3389]

Do u have anti recul for xim apex ?

[@XIMCentral]

XIM Apex doesnt have smart actions so sadly no :(.

[@nuca3389]

I buy a xim matrix and i cant copy the soldier anti recul

[@XIMCentral]

@@nuca3389 Hey, what do you mean with you cannot copy it? Did you update your XIM Firmware and XIM Manager to the new beta one?

[@nuca3389]

Nethermind its all ok

[@nuca3389]

@@XIMCentral my xim matrix no longer turns on why ?

[@doicev6062]

I did everything in the video but it doesnt work

[@XIMCentral]

What exactly doesnt work?

[@doicev6062]

@@XIMCentral idk it just doesnt

[@XIMCentral]

@@doicev6062 Like what doesnt work. What are you trying to do?