Perfect work, Nissan Sylphy side collision repair

[@chriswelcome8102]

Now that is a man that not only is very good at what he does but takes pride in his work

[@totszwai]

Although I don't agree of fixing such severely damaged car, I gotta admit that the workmanship is pretty darn good!!!! Good job

[@slendsunny8272]

As long as no damages to the floor panel, and somebody(mostly insurance, considering the low mileage) willing to pay, unit body vehicles can always be fixed to meet the safety standards.

[@randomkitty2555]

Severely damanged would be considered a totaled engine or a bad transmission assembly. Body work is in contrast cheap depending which service you go to.

[@exacto4]

Definitely a Master tradesman. Such workmanship is a sight to behold

[@raulroldan544]

Fantástico la perfección

[@billymacktexasdetective5827]

This is shit work done where profits are more important than safety. I can't imagine anyone being proud of this video...

[@MarkK01]

And he is more then likely paid way to low.

[@jasoncaruana5062]

The skills are very Good, seems to have done that a few times. i would suggest for his health, that he should wear a proper mask, this does not just help his eyes but the skin on his face from being burn. keep up the good work.

[@POPPYFeather-e9n]

Excellent work from such a young guy. I am a retired vehicle technician who has done plenty of welding etc but i couldn't stop shutting my eyes when he sparked up the welder lol, he seriously needs a good mask.l

[@scottowen5625]

Can you say flash burn? Had it once, never again!

[@nathanav1634]

yeah made me wince, welding with 0 tint and thin plastic mask

[@click-ue3kc]

He closes his eyes long enough when firing the welding machine. I have seen him do that in other videos.

[@SaeedYaqoob-b3i]

Perfect and a aqualified technician. God bless you.

[@rivercenter6232]

I think videos like this are truly invaluable. Cars restored like this really make you want to buy them.

[@jacekodrowaz5956]

A car for a suicide and a fool. Nowadays, there is no welding, only spot welding with electricity.

[@wardkoppel6704]

Makes me want to run away from them. The repair was the best that could be done, but still a lot of structure was compromised.

[@Oldstrommer]

There is no way this repair (using these techniques) would fly in NA or Europe. In USA the labour costs and replacement parts alone would be at least $12,000. The insurance co. would refuse to pay for it and declare the vehicle a write-off. But I do admire the skill of these workers and the amazingly great results!

[@EricaAguiar1704]

Se a pessoa não tem seguro vai ter que pagar pra arrumar…

[@EricaAguiar1704]

Aqui no Brasil há esse tipo de reparo, desde que não atinja 80% do valor do veículo ou se não comprometer estrutura. Se não o seguro indeniza o cliente.

[@СашаПоликарпов-ж2ц]

По российским меркам, это небольшая вмятина , чинят куда большие уроны , вытягивая лебедками искривления машины и отрезая чуть не половину корпуса.

[@bigredc222]

@@EricaAguiar1704 Who drives a new car without insurance? Loan companies make you have insurance.

[@SteelBird1000]

@@bigredc222 You can't evaluate other countries using the standard of the USA. In my country, insurance is optional and usually we only buy third-party insurance.

[@GeroldFeick]

So if you want to hear my opinion from a German citizen, I am very happy to share it with you. I am very surprised how, despite the accident, you manage to create a car as good as new from a scrappy car with just a few professional steps. God bless you and your skills. Please stay healthy. Your Gerold Feick from Denkendorf in Baden-Württemberg.

[@ronchabale]

I would have said it was a total write off but your mechanic prooved me wrong, nicely done.

[@maximusaviationchannel]

Oh in the US it would have been totaled.

[@nehemiahjackson]

I CANNOT BEGIN 2 TELL U HOW MUCH I HAVE LEARN FROM WATCHING YOUR CHANNEL, U MAKE IT SEEM SOOOO EASY 1 THING IS 4 SURE U MOST CERTAINLY KNOW HOW 2 GET THE WORK DONE NICE JOB BRO KEEP UP THE EXCELLENT WORK

[@robsundstrom9389]

He does but in reality its not

[@danielallen930]

So true

[@jamesbalsai8752]

Han, please have your technician wear a welding mask to protect his eyes! Otherwise he risk damaging his eyes permanently! Work safely and avoid eye injuries! Please get your technician welding helmet as. The shield will protect his eyes !

[@xinxianshi]

Hello, thank you for your concern for our safety, but they are used to this way of working and they will protect themselves.

[@LeoBerardino]

@@xinxianshi There is no "used to" for the injuries caused by exposure to UV light from welding. In 10 years or less, these guys will be blind or with severe cataracts.

[@BurninBogey7]

@@xinxianshi Certainly an attitude from an employer for whom I'd never want to work for. Shame on you.

[@Oldstrommer]

Yes, the Extreme UV light will damage their retinas as well as the corneas of their😊 eyes. They might be closing their eyelids while doing the welds, which is a technique I've seen elsewhere on YT third world shops.

[@ngkraft4242]

go donate some to them ...

[@GeorgeLennon100]

Although I'm not a big fan of rebuilding parts of a frame as this video shows, Han does do good work for this car. Thumbs up for me.

[@israelvinicius]

isso é mais comum do que se imagina! No Brasil aqui, é desse jeito ou ainda pior! ......... A galera mete massa! solda vergalhão, .... tem oficinas de reparação de veiculos, que aqui, chamamos de " boca de porco " que fazer serviços porcaria! Mas tambem temos oficinas de reparação de veiculos excelentes!

[@garypilet]

hi , im very impressed with the skills of the guy that fixed the car , its full credit to him that he has been a listener ! and today he is putting his very high standards to great workmanship , well done (score A1+ )

[@salmanskippy]

Do it once. Do it right. No short cuts. A perfect job. That's how they do it in Japan 🇯🇵. Thumbs up 👍 from Canada 🇨🇦.

[@zhuwkdal]

日本じゃないよ

[@aseppiazon7858]

This is in China not Japan

[@madhanakumar6155]

Excellent work by the technician, neat & nice fitting to original profile. Well done keep it up.

[@MrBigBoy4Life]

That’s excellent!! It only took him 24 minutes! Great job!

[@victoire7674]

Parmi les meilleurs tôliers que j'ai vu dans ma vie, merci pour tous vos efforts pour bien executer votre travaille

[@utubegoogler3585]

Wow! What a transformation! This technician's expertise and skills are amazing.

[@ryancarlos5067]

quem dera se aqui no brasil tivesse uns mecanico leigos como este seria sensacional, parabens!

[@antonioexpeditorodriguesde4412]

CARAMBA, SERVIÇO PERFEITO, CONSERTOU O CARRO COMO SE MONTA UM QUEBRA-CABEÇA

[@ryszarddettlaff6643]

Niesamowity człowiek. Mistrz nad mistrzami chylę czoła z szacunku do tego Pana .coś niesamowitego. Z podrowieniami z Polski szacunek

[@jn1ty]

It must be heart breaking to see your brand new car wrecked. Glad you can put it back to like new for them.

[@Roofluffer]

rather it be scrapped. once in a collision that metal is weakened it will NOT be as safe as it once was. no. i rather cars with any structural damage be required to be destroyed and scrapped

[@عباسالفلاته]

ماشاء الله تبارك الرحمن شغل ممتاز جدا واحسنت 👍👍👍👍👍👍🖐

[@filtro-d-aire6843]

Y ya está, 'siempre en garaje, nunca en circuito'... Y otro coche para el mercado de ocasión 😎👍🏻

[@ocalaguy32195]

I love watching your youtube channel. Such a talented handsome young man.

[@Dreez76]

This guy should be really proud of this craftmanship... truly .

[@JonahB502]

Very nice work 👏 👍, but no welding helment?? GREAT JOB!!

[@МихаилРн]

Все, не бита-не крашена😂

[@juanmanuelgatti1582]

excelente el trabajo de este muchacho , me encanta verlo trabajar . felicitaciones por tu trabajo .

[@alejandromunoz1109]

He quedado maravillado con el trabajo desarrollado por Mechanic Han. El joven demuestra ser un artista en el desempeño de su trabajo. Felicitaciones y gracias por compartir.

[@jorgepadillavillares8064]

Quedo listo para otro Trancazo esos carros ya quedan salados de por vida 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@Jay-q3p4o]

Han, amazing work, i dont know how much there paying you, they need to triple the amount. Amazing ❤

[@jarosawpychowicki6846]

Welding without a welding mask = blindness

[@mikespain8655]

Why no welding mask?

[@ableite]

They are asians. Their closed eyes protect them from this issue.

[@nicolasfiore]

Even if you close your eyes?

[@zulkufaltok9668]

Tebrik ederim çok güzel olmuş eline sağlık senin gibi ustaların Türkiye’de olması lazım🙏🙏🙏

[@mikeschumacher9715]

An amazing repair. Lots of respect for this guys work.

[@hothmobile100]

I am amazed. I thought it's impossible. He's a prodigy.

[@williamc2930]

Can I assume he has done this before? He makes it look easy.

[@michaelsimpson2490]

Great work, I'm concerned about welding with a clear face shield.

[@Newmusicreview]

Impressive...I thought repairs like this were history now, good to see some skills in action....my old Merc SLK has just gone in to be pulled after an accident...;-)

[@ЖеВуЗем-г9ч]

Здорово, конечно... Мастер, что и говорить... Но ведь потом это появится на рынке "не бит, не крашен"😂😂😂

[@miketaylor6282]

This helps to give you an idea of why body work is so expensive.

[@4ndrej]

The car will need the wheels geometry after this for sure, but I admire the cut precision on the old/new parts. It seems they fit perfectly.

[@李春重]

師傅的技術好厲害，真的令人敬佩！

[@jamescapodanno1861]

you are the best mechanic bodyman I have seen in a while.wonderful work. you know just where to cut and pull with your frame machine.very nice work.

[@williampatino8852]

DESDE COLOMBIA, ES UN VERDADERO MAESTRO, HAY MUY POCOS QUE TRABAJEN ASI,,,,,,

[@tagir7943]

A very fine machine restoration job I respect your hard work and works!!!😁💪👍

[@edwardouma1630]

God job my brother your working smart like Gen-z in Kenya here

[@jairoelrockero]

Quedó como recién salido de fábrica, felicitaciones. Saludos desde Bogotá, Colombia 🇨🇴

[@louisebrown2887]

Really enjoy watching you work master at your trade

[@jxengine]

Please get this man a welding helmet.

[@danieloscarvillalon3856]

Un maestro!!!! Felicitaciones. Abrazo grande 🇦🇷🇦🇷🇦🇷🇦🇷

[@jewelhome1]

Respect for today’s “panel beaters”, unibody repairs look tough. Like straightening a squashed tin can.

[@jeffemiller1470]

I would not hesitate to buy that car. Great job!!!

[@SteelBird1000]

I won't do the same thing. If that were my car, I would sell it off after repairing. I won't drive any car that has damaged its structure.

[@benwouda]

If you don't like your wife put her in the passenger seat

[@nortongprade9330]

Parabéns. Trabalho excepcional. Não teria nenhum problema em dirigir esta máquina refeita por vocês. Vocês são gênios da reconstrução. Abraço

[@juanar4305]

Excellent work by people who know their craft. But in my ignorance I thought I would see a master of the rubber hammer straightening out all the wrinkles in the sheet metal. 🤣🤣

[@nighthawkj30A4]

I always say when any unibody car is crashed like this. It wont be the same again because the frame and chassis. Is made to perfect at the factory. But watching this i say it is as close as we will get. For the available technology we have now. Great workmanship Though

[@taijkon]

How long experiance do you have doing boddyrepairs? I have 40 and I say your WRONG!

[@nighthawkj30A4]

@@taijkon 20 years I-CAR cert and Im saying I’ve seen other parts of the Frame underneath (undercarriage) still be bent. Or other hidden damage. Thanks for the comments.

[@rodneyking4183]

I think replacing the side was the correct choice. I agree that a car, that was practically brand new, deserved a second chance. I wish you could have saved my Mustang after I hydroplaned off a highway and crushed the back of it. I have a few videos on my channel. It was 7 years old with 71,000 miles. I had bought it brand new with 7 miles though.

[@YoutubeHero666]

was it that bad? could you not of fixed it?

[@mode1charlie170]

Beutiful repair. I thought the car would have been put in some type of jig to ensure the body panels were returned to original station marks.

[@dionisiofernandezperez7470]

Magnífico trabajo de chapa y pintura, muy buen profesional, pero tiene que usar máscara de soldar 🥽 para proteger los ojos

[@louisebrown2887]

Enjoy watching you do very good work you can tell you take great pride

[@murtadahhasan6329]

Hello my friend I hope you fine and good health it’a professional work doing ( Kuwaiti 🇰🇼)

[@murtadahhasan6329]

Hello my friend long time didn’t send any video what happened ( Kuwait 🇰🇼)

[@gtsimdriver5524]

You gave me some new little tricks that I didnt know. Amazing work.

[@user-fb3po7jj9s]

This work is worth it, he knows how to do it

[@rakeshpk9648]

Sir, you can certainly work an hammer. Just love it. cheers.

[@RR70707]

Solo faltó el armorall en llantas! Excelente trabajo!

[@dalebenavidez4896]

Fantastic work! You are great at what you do keep up the great work.

[@Ivo-gn4oo]

Congratulation for all alwais I watching this vídeo even is very good From Brasil 🇧🇷 São Paulo

[@GrandPitoVic]

Very good job sir. I've seen you do things with cars I know here in the USA they would not. They would bend the metal back and fill it with body filler. Good job

[@sjefhendrickx2257]

Because most in the usa is fake!

[@michaelkidess3692]

Very talented …. WOW , greeting from Toronto Canada🤓

[@Slartibartfaster]

Very skilled Tradesman. Look after your eyes though dude (welding mask).

[@JoseAAbreu1957]

Seu trabalho é sensacional ! Parabéns !!!

[@jaym5938]

Looks great. Wish we could have seen part of the painting and how you reconnected to the rear quarter panel.

[@luizfernando-ko4gi]

Muita satisfação em ver seu trabalho ! Like e inscrito do Brasil

[@diesunddas1491]

In Deutschland hättest du für die Reparatur, wahrscheinlich einen guten Kleinwagen bekommen. ☝👍👍

[@delijasasevera2212]

Quality or lack there of in nissan vehicles really make you appreciate german premium brands.

[@flashnmb1]

You obviously haven’t experienced VW’s crap!

[@williamweddington3140]

Yeah and you pay a high price for it.

[@drscopeify]

All cars are built about the same, you can go see a BMW 7 series repair it won't look much different.

[@markvanhoorn288]

Hé Han, veru professional job, bu prote 't your eyes with a welding mask!!!

[@mikemakuch2824]

Amazing and talented individual! Great Video!

[@mariano8112]

Buenos días desde Madrid (Spain) felicidades chapista, eres un maquina!

[@flightofapaullo72]

Is he welding with his eyes closed? No welding helmet? Protect those eyes. Great work as always though.

[@edsonalves6789]

Boa noite. Como é bom ver um trabalho de qualidade. Parabéns.

[@DanielPereira-u9u]

Surreal! Que trabalho incrível!

[@rubensbianchini30]

O CARA É FERA MESMO. PARABÉNS!!!!

[@philippbalz1863]

coole arbeti 😎🥳 was ich nicht so toll finde den Augenschutz beim Schweissen so kann es zu schweren Verletzungen durch das Blenden kommen

[@rudiariyanto5424]

Good job technisian good welding back perfect

[@alfamonk]

impressive work but the structural integrity of the B pillar and sills isn't guaranteed.

[@indioschimney7001]

Really like the videos...cool set up with hook &ramp..combo..

[@maximusraptor]

The skill of this man is very impressive! I’m kinda blown away by it. Just curious what the time frame was from start to finish

[@bubbleobill267]

Twenty four minutes and twenty nine seconds. They work fast in Korea.

[@ПавелЧ-и4д]

Молодец как всегда! На этой машине смело можно ездить.

[@ОлегБабюк-н9у]

В Осетии есть мастер Руслан, он ничего не вырезает, а все детали вытягивает до идеала. См. на Ютубе.

[@ПавелЧ-и4д]

@@ОлегБабюк-н9у лучше так поменять, тем более там метал в усилителяхмощный

[@олегбогданов-п6ь]

До следующего ДТП.

[@олегбогданов-п6ь]

​@@ОлегБабюк-н9уну да, метал и так мятый да ещё твой мастер будет его мять в разные стороны чтоб поставить на место а потом ещё шлифовать чтоб выровнять поверхность. И что останется? По собственному опыту знаю что лучше новую деталь поставить если есть возможность, а старую жованную лучше выкинуть, и даже после страшного ДТП можно сделать и будет машина, а вот после такого ремонта такую машину можно купить чтоб потом добить.

[@freezingwitch003]

The 345 km is the remaining fuel range, not the ODO meter. However, the true ODO meter is 821 km, which is still low. I am glad to see the sylphy back on the road again.

[@PopePlatinumBeats]

Master Craftsman.... incredible... didnt seem to take a long time

[@gtiborp1950]

Impressive work! He´s a mechanical artist!

[@carlosmarin6171]

Hell of a job…well done…

[@joseazerrad]

Excelente trabajo de reconstrucción.

[@jaimehernandezcopca-jy8bb]

Eres un genio reparando carros felizidades

[@Slave-Of-Christ]

That is, like, seriously impressive.

[@rachidabane2007]

C'est un vrai professionnel Très Bon travail

[@mzeelisto]

Excellent work! Kudos!❤

[@cadabbra824]

Мужик, ты мегамастер. Я в восхищении 👍👍👍

[@ДжеймсБлант-х7н]

Вот это мастера рехтовки!

[@bammtc8044]

عمل رائع دقيق و متقون شكرا لكل من ابدع في عمله استمتعنا بمشاهدة الفيديو