Xotic Customs Tail Dragger Installation on Harley V-ROD

[@rschris]

Nice video, to bad it kept blacking out, though .

[@diytoolreviews8278]

The blackouts were surprisingly annoying

[@saksah0lic]

@@diytoolreviews8278 Made me want to punch somebody.

[@teedogteedog719]

Make sure ur break lines are not rubbing on the bags. On the other side you will need spacers so the the bags wont hit the belt guard.

[@dommit]

Hello there, can please tell me what is the normal PSI/BAR of this suspension and the limit? Thanks.

[@jimmyleanza8970]

Will the holes for the wires mess with the airflow? Will the objects in the the airbox mess with the airflow? Thanks.

[@TABPerformance]

Thanks for your questions. This doesn't cause any issues with airflow.

[@jimmyleanza8970]

TAB Performance, Inc. Thanks for the reply!

[@rishkum536]

I may have missed it but where were the switched mounted?

[@TABPerformance]

We usually mount the switch on the left side of the bike on the bottom side but you can really mount it anywhere that works there isn't a set spot on this type of system.

[@axleduffy4346]

Were you able to keep the same rear fender?

[@TABPerformance]

Yes, but if you go all the way down the fender did touch.

[@colombianodny]

how is the fitment with the hooligan set up? any issues? I purchased the hooligan set up but I am not sure if the compressor will fit?>

[@TABPerformance]

No, the Motohooligan intake actually frees up some space, so there is more room for the compressor.

[@julianesai]

@@TABPerformance Could you please show how to set this up with the Motohooligan?

[@julianesai]

If the Motohooligan replaces the airbox, where do you mount the compressor for the suspension?

[@TABPerformance]

@@julianesai we don't have that bike to do that anymore but feel free to call in and we can talk you through what we did and where we moved ours.

[@mikem4201969]

Don’t mount the switch under air box it’s no good. Main wire harness is in the way on Vrod. Had to mount it inside the horn , much better and easier to get to. Also cut the bottom of the compressor mount off instead of folding it over because it will hit the top of air box cover and not clip. Big mistake on them.