Xtool D9 Pro | Ford coverage | Special Functions | Programming

On my previous video, I was asked if the Xtool D9 Pro covers the Ford and this is the demonstration of that.
Some of the functions failed because I am not connected to the any car.

[@enockmakule5862]

I need it diagnostic trick, I don't know if it dies to use without wifi

[@marcialcabrera7611]

Does it work on a 2019 ford escape? Thank you!

[@siyaonline]

Ford Escape / Kuga is supported until the latest model. You can check out the following link for more other functions - www2.xtooltech.com/EN/ProductsView/D9Pro.html

[@mikeoparaopara7697]

Hello have use d9pro change instrument cluster system on Ford focus 2007 and program it before because I tried it but it doesn't work

[@siyaonline]

Hello Mike, yes I have changed the mileage on the Ford Focus (2005-2008) but I was using the Xtool X100 Pad. D9Pro should easily do the job

[@raheemkarim9942]

I am doing a engine swap , would i be able to change the VIN with this on like the modules e.g ecm , bcm , tcm , srs .... Ect ..

[@siyaonline]

That sounds more like a complete car swap...lol But on a serious note, check the following website for more functions, tool and modules that you can make changes on: www.xtooltech.com/english/FunctionQuery.html

[@gerardogle1732]

Hi I'm new to this, I have a cheaper scanner but I would like a scanner like this that can do programming of ecu"s and keys, I have a bmw e93, tell me, if I have the attachment for this, where do I buy a blank bmw key from?

[@siyaonline]

Hello Gerard, yes you are able to program keys on that BMW. I am not sure where you are located but there are couple of places here in South Africa that sell keys

[@krisn8820]

It will not program ecu's. You can write vin, and possibly code. To program you will need a j box, and connection to factory software.

[@bharti6234]

Sir Ford me ye shi se kaam nhi krta kya

[@andysanchez7050]

Can you add the key programming attachment on?

[@siyaonline]

Yes, you can program keys on the Ford, if that is what you are asking. Let me know which Ford and year model you want to program the keys on and I will double check for you.

[@ArnoKLX]

Hi, D9 pro suport OPEL europa, key programing

[@siyaonline]

Good day Arnis, here are the models covered under Opel....but you'll find that most of these models have the same cluster and therefore can use the model that shares the same cluster as your Europa. If that fails, you'll have to read the eeprom and do it on the bench. OPEL Adam 2012 OPEL Astra 2010 OPEL Astra IV OPEL CASCADA 2013 OPEL Combo 2015 OPEL Combo 2011 OPEL CORSE E OPEL Insignia 2010 TYPE 1 OPEL Insignia 2010 TYPE 2 OPEL KARL OPEL MOKKA OPEL MOVANO 3 OPEL VIVARO 2 OPEL VIVARO 93C76 OPEL ZAFIRA C

[@djwilson48625]

Thumbs down. Soooooo many thumbs down on this video..... What is the obsession nowadays of people just playing a screen recording and just randomly moving around on a screen?

[@siyaonline]

I wouldn't call it an obsession but if you have seen the previous video, you might understand why I made this one. However, you can move along to other channels if you don't like this one. That's the power of the internet and a value of choice 👍 Thanks for the comment by the way