Y62 S5 Patrol wheels and tyres - Offset & 35s - HGT new rig build Garage Life

[@whitey62]

Man, I love my tyre pressure monitoring system. Airing up/down I don't use a gauge any more just put it on the screen and the kids yell out when it gets to the pressure I want. Yes I have checked with a gauge and spot on, same, same. So glad I put them back in my new rims.

[@HappyGoTravel]

Hahahah that’s awesome, I didn’t even think of airing up. When you’re aired down does he light stay on the dash?

[@whitey62]

@@HappyGoTravel yes light is on (doesn't bother me), but no alarm sounds or any noises.

[@HappyGoTravel]

I’m use to the light on mines there constantly atm🤣

[@plakic]

Loving the look. I’m getting some fuel rebels 18x9 +20 offset with nitto ridge grapplers R18/295/70.

[@HappyGoTravel]

Nice. They were one of the sets I originally tried to get. Nice wheels ✌️

[@smallaam6191]

The y62 patrol is one of the only cars that can happily fit 35s no lift and no struggle, and f

[@ahmedalshammari8950]

I haven't found any version of your Y62 with a manual transmission. I own it in Kuwait and use only rear wheel drive in a way to disconnect the electrical conductors, and the second is to install the motion retardants for the front axles in this way, only 100% power at the rear.

[@precisionriflereviews2029]

I would love to see the factory wheel with that tyre on the car for clearance

[@HappyGoTravel]

There are plenty of people running this size tyre on standard wheels.

[@stevendouglas6593]

The factory is an 18” rim. The new rims and tyres are 17”.

[@Froggy543]

Put the TPMS back in. I use it all the time in my S5

[@HappyGoTravel]

I am starting to think I should have given tpms a chance

[@iraklirekhviashvili9673]

Good car👍👍👍

[@HappyGoTravel]

Thanks mate ✌️

[@redbitter1232]

The trick with the spare is to take some air out of the tyre.

[@HappyGoTravel]

That was the plan if it didn't fit hahaha

[@TWX1138]

there are some little boxes of dubious origin that transmit some kind of TPMS false data to satisfy the computer. I couldn't tell you where to get 'em but there are some videos on other makes/models where that has been done. I ended up throwing ACDelco 315MHz sensors that do basically all makes/models that use 315MHz into my Nissan Frontier so later I can install a pressure display that receives the Ford version of the data that these sensors emit. That will let me keep an eye on my tire pressures even when aired-down for 4x4 driving, because obviously the on/off dash light isn't going to tell me if I go from 15 PSI to 0 PSI like a numeric display would. If your truck is instead 433MHz that would be even easier, there are TONS of aftermarket solutions for 433MHz, but almost none for 315MHz.

[@HappyGoTravel]

Thanks mate i'll sus it out, i did have the idea of putting the sensors in an air tight case and pressurizing it, i did fail with this idea though hahaha. I have all the factory sensors so worse case ill put them in.

[@TWX1138]

@@HappyGoTravel Putting the sensors in a case won't work, they don't start transmitting until they spin unfortunately. If you don't mind chalk lines, a good tire shop should be able to mark on the tire the position of the valve stem, break the bead just enough to replace the valvestem with the sensor, and then reassemble without requiring balancing again. The chalk mark is in case they do have to dismount more thoroughly, so they can put them back on in the same orientation. It should keep labor costs down if they don't have to balance again.

[@HappyGoTravel]

@@TWX1138 There you go i didn't know that, it does make sense though. I think that's what i'll end up doing

[@ahmedalshammari8950]

Important tip for all Y62 cars: Do not change asymmetric wheel sizes. A necessary example is that the 17 gauge for all tires does not have any problems, but if the front is 20 and the back is 18, then this is the problem when changing unbalanced, the maximum speed of the car is 129

[@bigcheese82]

Why would you do that

[@Aubzify]

Hey Mate, so you reckon a 295/18 tyre would fit with a tow ball fitted?

[@HappyGoTravel]

I think it would. This was the main reason I went 295s. I won’t get my Raslarr rear bar until mid year. The next set of tyres I’ll consider going bigger

[@kegginbeer6430]

Hey, the 295s do fit with a tow bar, just need to knock all of the air out to make it fit.

[@aliabd3439]

My car is a Nissan Patrol Y62 2018 V8 400hp. I bought it from an authorized dealer with 18 inch weels, and now I want to change the weels size from [18 inch to 20 inch] . can I do that? Is there harmful or negative effects on the functions of the car system or double gearbox or anythins like that ?? Thanks

[@HappyGoTravel]

Nice, they are great rigs ✌️ You can definitely put 20” wheels on if you want to. It is the tyre size that will create change. Standard tyre size is around 33” so you could put a 20” wheel with 33” tyres and there be no to minimal difference. The tyres in this vid are close to a 35” tyre, I have since gone to a 35x12.5r18 the patrol has no issue with them. Just keep in mide the bigger the tyre the more fuel you will lose and there is slight power loss being bigger and heavier, but nothing to bad.

[@unknownuser954]

I’m buying a cheap 2013 y62 and doing a full facelift on it and getting it wrapped satin pearl white and having the leather re trimmed that brown leather, it’s going to be hectic, I’m only 16 so I kinda don’t have $100k sitting around lol

[@HappyGoTravel]

Mate we all start somewhere. I’d say a 2013 y62 is heaps cooler place to start than most do ✌️

[@deanbriggs536]

I have been looking at changing my tyres to the Kumho MT71’s. You mentioned the noise as they are a mud tyre but what does it sound like in the cabin?

[@HappyGoTravel]

I don’t find them too bad. I have run muddies for a long time though. These are loud compared to other options though. This has some In can clips, mainly an exhaust vid but it’ll give some idea kzbin.info/www/bejne/fZyyonh6j56SqLM

[@deanbriggs536]

Thank you very much. The video was good

[@stirlingquintal971]

Do they clear the brakes Enough not to cause any issues

[@HappyGoTravel]

Yeah they do. I was a little concerned to start with but I’ve had no issues at all

[@DarrenBoxhall]

Hey mate. How close is the tyre to the upper control arm?

[@buzurk]

Hey, Great watch mate, really good advise! How high is your garage entry? concern about getting in my garage when i put "35s" on, my slab to the beam above my panel door is 2130mm and my drive it on a downward slope like yours, worried about the car when its approaching on an angle if it will get into the garage

[@HappyGoTravel]

Hey mate mine is the same with 2130 mm with the angle of my driveway I have around 140 mm at the tightest point.

[@chiimchim7987]

Hey mate, what size suspension lift are you running now?

[@grayditri7860]

nice video mate, curious how you rate that tyre now that you've had them on for a little while. They look tough AF, but how do they go as a daily on the sealed roads, hows the wear looking? Ill probably look to keep the stock rims and go for a more aggressive tyre closer to 35;s once the rig lands. cheers

[@HappyGoTravel]

Yeah they’re not the best 🤣 they’re actually going pretty reasonable considering how aggressive they are. Wear wise 15k on them and look new still. They are noisy, as you’d expect. I’ve seen a few with stock wheels and big muddies. It looks alright

[@grayditri7860]

@@HappyGoTravel lets face it looks are important. They look the goods. Such a personal thing i do like the blackout but thinking maybe chrome can make a come back... Really like the cost breakdown too mate thats a useful thing

[@HappyGoTravel]

@@grayditri7860 hahaha this is true. thanks mate

[@dhinukrandeve9290]

@@HappyGoTravelLove the look 😍 How noisy is it compared with the stock one’s? What’s the option to keep the vehicle clearance same after upgrading due to garage height restrictions?

[@jmpin1]

With a tow bar fitted do you know what size tyre would fit underneath the car??

[@HappyGoTravel]

I run a large OD 295/70 18 with around 10 psi in it, you’d jam a small OD 35” like a BFG under the same way. I think a large OD 35” like a nitro would struggle

[@romainballestracci8023]

Great video thank you. What is the offset on original wheels?

[@HappyGoTravel]

Original off set is +40 and they are 8” wide

[@80sshred11]

Is this all road legal?

[@HappyGoTravel]

In NSW it is, you’re allowed a 7% increase in OD, and 50mm in track. you’d have to check your state or territories legislation on it.

[@marnojulianmiranda1387]

Hey brother nice RIG! Can I kindly ask for the wheels, when you buy an 18x9 wheel does it have to be the exact PCD or centrebore as the default or can both PCD or Centrebore be far from the default, it's just I'm browsing the same tyre and it says that the Y62's wheel specs are - Center Bore: 78.1 mm - PCD: 6x139.7. So just wondering if I bought a wheel with this specs would it fit the y62 or should I get a number closer to the Center bore rather than the PCD? 18x9 6/139.7 18 1133 106.2 Thanks for your insight! Love the vids bro! Keep em coming

[@HappyGoTravel]

Cheers mate ✌️ the PCD is the wheel studs so that needs to be the same. As for centre bore it can be bigger you’ll just put hub centric spacers in to compensate and get it to fit nicely with the hub. One thing to remember is the y62 has massive front brake callipers so alot of wheels won’t actually have the clearance with the back of the wheel face to fit. It’s best to test fit or talk with a tyre shop in all honesty.

[@marnojulianmiranda1387]

@@HappyGoTravel Hey mate, I am looking to go for the same wheels like yours because they definitely look SICK hey! Do you remember the exact wheel dimensions for yours? Because I was browsing on the exact same wheels and nothing states the exact 79 bore center and 176 pcd. What exactly was your wheel dimension mate please? looking forward for more content bro! Cheers!! 💪💪

[@HappyGoTravel]

@@marnojulianmiranda1387 they are 18x9, positive 18 offset, 6x139.7 I couldn’t tell you the centre bore though. If you look online at shops like “the wheel deal”, ttfsydney is another good one, and so on you can search vehicle specific. There are some awesome wheels around atm ✌️

[@marnojulianmiranda1387]

@@HappyGoTravel Awesome mate! I just ordered them and awaiting for them to come in soon! Do you know mate if I can use 35x12.5x18 on the Patrol without lift without the tyres scrubbing? Cheers for the insight brother! Love your vids super cool 💪💪💪

[@HappyGoTravel]

@@marnojulianmiranda1387 too easy mate, yeah you just have to pin the guards back like I did I this vid

[@aimanazhar9376]

Are gonna do off-road after 1st car service, what engine oil brand would be your preferences? #HGT

[@HappyGoTravel]

Most definitely will be. I’m just waiting for my rock sliders to arrive then it’ll be amongst it. As for oil what ever Nissan put in it was my thoughts 🤷‍♂️🤣

[@teamd57a26]

Hey yo Which wheel / rim was your first choice?

[@HappyGoTravel]

i wanted KMC impact but it was a 12 week wait

[@teamd57a26]

@@HappyGoTravel Thanks, I’ll check them out - I’ve just ordered a Patrol and need some inspiration for rims. Also great job informing the best offset.

[@HappyGoTravel]

@@teamd57a26 Thanks mate. I found wheel hard to get, if i realised earlier I would have ordered while I was waiting for the Troll

[@martyma3244]

@@HappyGoTravel kmc impact what offset man?

[@HappyGoTravel]

Marty it still would have been +18 on a 9”wide rim

[@matangmeg]

Hey mate, did you get a 295 on the standard wheel? Did the spare fit on the car with the standard offset? Cheers

[@HappyGoTravel]

Hey mate, yeah I did and they do, there is enough clearance between the ucas to run them on standard wheels

[@ghassan7887]

I’m curious how much did the whole set cost you ?

[@HappyGoTravel]

350 ea wheel and 369 ea tyre

[@Jason_Cunts]

Not 35s though