YAMAHA DT 50 R - Full Frame Rebuild! - Episode 6

  Рет қаралды 4,983

FEED THE MACHINE

FEED THE MACHINE

2 жыл бұрын

In this video we are finally getting the bike back to a rolling frame stage, I hope you enjoy it!
Don't forget to leave a Like if you enjoyed the video,
Thanks for watching!
Update: Hey everyone! I have added links to download the 3D fairing files, check the description in video/episode 8!
Connect with me on:
Instagram - @feed_the_machine - / feed_the_machine
Link-In - / cameron-reeves-a578a3182

Пікірлер: 16
@filipcederus7771
@filipcederus7771 2 жыл бұрын
great video!
@z123462075
@z123462075 Жыл бұрын
nice
@zabitaba5161
@zabitaba5161 2 жыл бұрын
great video ! pumped to see this thing running
@AlphaEngineer2022
@AlphaEngineer2022 2 жыл бұрын
Thanks! So am I 🙂
@dsboy2392
@dsboy2392 7 ай бұрын
why'd you put the air box back on if you fitted a pod filter?
@AlphaEngineer2022
@AlphaEngineer2022 7 ай бұрын
Purely a cosmetic idea, I wanted more of a stock look🙂 but it will most likely help keep some extra dirt away from the filter.
@skycreeper795
@skycreeper795 2 жыл бұрын
I have a question im bussy with my yamaha dt 50 r and having some problems with the exautst what is that rubber thing that you put betweet the exaust port and the exaust at 13:32?
@AlphaEngineer2022
@AlphaEngineer2022 2 жыл бұрын
Hi, it’s a black coloured metal spacer not rubber, and it makes the diameter of the exhaust fit the cylinder, or there would be a gap, there’s also a small o-ring that goes into the cylinder just before and sits inside the cylinder too, I’m sure I you can buy the parts separately from somewhere like maxiscoot.com 🙂
@nicogren4749
@nicogren4749 2 жыл бұрын
the rubber thing u are putting on at 10:12, is it a type of chain guide? and is it important to have on or can i run it without
@AlphaEngineer2022
@AlphaEngineer2022 2 жыл бұрын
Hi, it’s just a chain guide, and it helps guide the chain onto the sprockets and reduce the risk of the chain coming off whilst riding. I suppose you could use the bike for some light riding without one fitted and a slightly more tightened chain to be safe. I probably wouldn’t recommend it though as the bike was designed to have one and I don’t think they are too expensive anyway🙂 It’s more to do with the suspension travel and chain slack, hence most dirt bikes are fitted with an under swing arm type guide as opposed to a sports bike that aren’t fitted with them because the travel in the suspension isn’t as great.
@nicogren4749
@nicogren4749 2 жыл бұрын
@@AlphaEngineer2022 thanks for the response, i will try to find one to buy. Excited for the next part of the series😁
@AlphaEngineer2022
@AlphaEngineer2022 2 жыл бұрын
@@nicogren4749 thanks 🙂
@CrossRider76
@CrossRider76 Жыл бұрын
Last episode where is it ?
@AlphaEngineer2022
@AlphaEngineer2022 Жыл бұрын
I’ve just uploaded a new one👍
@CrossRider76
@CrossRider76 Жыл бұрын
@@AlphaEngineer2022 Nice thanks you
@AlphaEngineer2022
@AlphaEngineer2022 Жыл бұрын
@@CrossRider76 I’m re uploading it as the picture quality isn’t great, should be live in 30 mins🙂
YAMAHA DT50 Episode 7 - Will It Start??
10:18
FEED THE MACHINE
Рет қаралды 3,3 М.
Yamaha DT 50 Restoration, Episode: 2 (The Teardown)
17:10
FEED THE MACHINE
Рет қаралды 7 М.
3M❤️ #thankyou #shorts
00:16
ウエスP -Mr Uekusa- Wes-P
Рет қаралды 12 МЛН
I Can't Believe We Did This...
00:38
Stokes Twins
Рет қаралды 78 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:25
CRAZY GREAPA
Рет қаралды 15 МЛН
Hurco VMone VS VM10i - quick walk around
15:17
FEED THE MACHINE
Рет қаралды 958
Honda CB125F - honest long term review after 15'000mi / 24'000km
14:29
KTM 350 SXF VS KAWISAKI KX450F (RAW AUDIO)
7:15
mx5justin
Рет қаралды 688
Ч13.Yamaha DT 50 R.Восстановил.Проехал.ПРОДАЮ !!!
22:10
If you can’t afford a robot, become the robot!!🤖😂
0:59
FEED THE MACHINE
Рет қаралды 11 М.
The BEST Way To Fine Tune Idle Mixture Screws For Your Carburetor
15:16
TheMotorcycleMD
Рет қаралды 1,3 МЛН
D50B0 | Neuaufbau! | H1 Racing
16:48
H1 Racing
Рет қаралды 12 М.
Yamaha DT 50 restoration episode: 1
5:22
FEED THE MACHINE
Рет қаралды 2,1 М.
HURCO VM10i demo cut - cutting metal - HD 1080p
13:09
FEED THE MACHINE
Рет қаралды 566
#comedy #biking
0:17
Rider Mahfuz Vlog
Рет қаралды 2,2 МЛН
Chúa ơi - Hãy thử cái này #automobile #funny #shorts
0:12
hoang quach
Рет қаралды 27 МЛН
heavy equipment
0:26
Mr PumpOperator Saudi Riyadh
Рет қаралды 9 МЛН