Yamaha dtr 125 project 2001 jammed powervalve servo (pt3) 2stroke motorbike project

Re upload I mist the fist part out were it was moving a mm

[@michaeldent8141]

You got any good Dtr 125 you won’t to swap for a Dtr sm 125 2006 or do you know can I just change wheels straight over or not?

[@2strokemxclassics]

Yeah change the wheels over to sm, s and u can use the original dtr/e forks and dtr/e front caliper u just need to get a bracket made so the caliper fits onto the bigger disc on the sm wheels m8

[@zabitaba5161]

is the longer cable supposed to be in the left or right ?

[@2strokemxclassics]

The right side m8 short on left meausure from nipple to nipple cos some have diferent length black middle parts of the cables

[@zabitaba5161]

@@2strokemxclassics thanks man and i was wondering why it didn't wanna adjust properly xD i put the longer one on the left

[@zabitaba5161]

@@2strokemxclassics I've got another question can I run the bike with no airfilter in ? cause the old one was salvaged and no air filters are available till like the next month

[@2strokemxclassics]

I wouldn't run with no filter on m8 soon as it starts it's sucking air threw, filter then carb, Reeds and into the bore its risky incase anything gets in, use a cone filter like what pit bikes have till you get a proper filter

[@zabitaba5161]

that's solid advice m8, thanks for the help you're a legend@@2strokemxclassics

[@Tizzypj]

Ain’t been able to message you in a while bro message me and let me know your alright g

[@2strokemxclassics]

Am sound bro u ok just uninstalled everthing just cos am on with this re a got so canny busy atm replaced everything so far m8 is yours gratfin yet, think a just need a wheel for this one, eveythery thing else is there just on putting a head on it now

[@Tizzypj]

@@2strokemxclassics calm bro tried message a few times and wouldn’t send just wanted to make sure you was cool g, yano I look up to you still, I hear you I hear you gonna upload some of it or not bro, nah she’s still as she was spoke to my posty today tho my 2 carbs should be here tomorrow both 28mm not 26 tho🤦🏼😬 if they fit I’ll use stock jetting one looks like genuine dtr carb or a good copy at least both flatslide too and my guy my guy flying init lol should message me your number and I’ll text Text you or send me a email or something I respect your busy g I’m times minus these days lol but I don’t wanna not be able to shout you if you get me or if your fully active on here always I’m cam with that

[@Tizzypj]

@@2strokemxclassics yo bro my dtr carb just came paid 100 for it and another black fake dellorto 28mm pwk flatslide too she fits all sweet even has a 220 jet which is better for me air screw is ducked but I’ll sort that out I’m missing the needle bracket like what screws into the bottom of the needle hosing and the spring bro is this something you’ve got please tell me it is

[@Tizzypj]

@@2strokemxclassics should be running and riding once I’ve got them bits

[@2strokemxclassics]

Av not got them parts m8 Al check some old rounds slides see if there the same bottom part m8

[@noobspawnersstreams4102]

im having a problem with mine just spinning to the right 4-5 times then does it again a few seconds later always twice started after i rewired but im 99 percent everything is exactly where it should be just engines out but was spinning right left with engine out so confused lol

[@2strokemxclassics]

Lee Lee on fb m8 what is it the servo motor m8, normally if not a flat battery it's the cdi unit m8 which causes a servo to fault, 97 to 03 were west for it cos the cdi will still run everthing as normal apart from your powervalve so people either pin the valve or re sell them on as working

[@noobspawnersstreams4102]

@@2strokemxclassics fixed it its a 04 re and was valve servo one of the connections out the 5 had no contact lol

[@noobspawnersstreams4102]

@@2strokemxclassics do you know what the head light wires are i have blue green yellow tryig to wire a universal to it and no luck atm

[@2strokemxclassics]

Ah sound m8