Since i had my plate modified to fit the MoriMoto projector, which just needed 4 holes drilled to fit the threaded side of the projector housing, i started putting everything together. One thing that would help, when he starts bolting something on, even for the plate to the projector itself, would be a 2 or 3 second shot of the nuts and bolts, washers ect, of what he will be using for this part of the video. I had to stop the video and look at the table a few times to see what all parts i would be using for the section of the plate he was doing next, so to not leave anything out, like a washer. Also they had a plate/spacer for the plastic piece that snaps into the square hole on the plate. Since i did not have the spacer used for that i found that the metal plate that you remove from the original chrome bowl which was held with 2 screws works as a perfect spacer substitute, it slides either way a bit so you can conceal it behind the black plate and is snug enough to not move. All in all as mentioned in my comment months ago still a great video. Thanks.
@CBrian20127 жыл бұрын
The video does help on how to put in this kit but it leaves out a lot of details. one being at 1:46 the first plastic piece you take off, when you back out the bolts for the reflector it doesnt just fall off like this, you would need something to get the ball from the bolt off the plastic piece, pictured in the upper right corner of 4:42 before putting the projector back in.
@Retrofitlab5 жыл бұрын
The ball is removed from the holder on the reflector by using a bit of heat so the plastic holder gets a bit softer and a bit of force. A screwdriver or interior removal tool to use as a lever or to pry it open also helps.
@frokenfirklover93156 жыл бұрын
Cool product and and video. But why on earth do you not show the end result on the motorbike??? How do I know if this would look cool on my bike?
@timoboy195 жыл бұрын
This is the same headlight as the 2018/2019 mt07, its just a little more difficult. So if you want to install one of these, its possible as I did it myself today!
@Retrofitlab5 жыл бұрын
Hi! Good to hear! Could you tell us maybe why it is more difficult or what you have to modify? Thanks!
@timoboy195 жыл бұрын
@@Retrofitlab to open it up, you have only the top part for leverage, u cant open it up on the left,right or.bottom. thats why its more difficult to open up.
@Retrofitlab5 жыл бұрын
@@timoboy19 Thanks for the info!
@nabil84144 жыл бұрын
Good work i m grateful 👍👍👍
@Retrofitlab4 жыл бұрын
Thanks!
@DCFTW687 жыл бұрын
The MT07 should be quite similar uh? the only thing I am really afraid of failing at is when opening the headlight housing itself, would a hairdryer do the job on that glue? thank you
@vilsonmamute2 жыл бұрын
Dahora, vcs são de onde? Preciso modificar o farol da minha moto
@Retrofitlab2 жыл бұрын
Estamos sediados na Holanda
@lollojudo_it4 жыл бұрын
Hello, is it better to heat the headlight also before to open it or only to close? Thank you.
@Retrofitlab4 жыл бұрын
Yes, sorry, it is missing in the video, but to open the headlight it needs to be heated also.
@Zenki_Ls1_Drifter7 жыл бұрын
Can these be purchased from the US? They look awesome
@fredericosantos67834 жыл бұрын
Hi , Dou you guys also sell this as a fully built option or only as a kit to install at home ?
@Retrofitlab4 жыл бұрын
Normally we only sell DIY kits, but please contact us to see if we or somebody else can help you out.facebook.com/Retrofitlab/
@lilleaha27 жыл бұрын
When are you doin the mt07/fz07
@zero_to_10005 жыл бұрын
Sick
@Retrofitlab5 жыл бұрын
Thanks :-)
@TheKoen10007 жыл бұрын
hebben jullie ook een foto van de koplamp op de motor?
@patrickgunther82164 жыл бұрын
Hallo, ist dieser Germany ECE-Konform ???
@Retrofitlab4 жыл бұрын
Nein, es tut mir leid..
@carlosdeleon95936 жыл бұрын
Will this work with the 2018 MT 07 since I believe the used 2014-2016 MT 09 headlight
@Retrofitlab6 жыл бұрын
When the same headlight is used it should work. But when looking for pictures of the 2018 MT07 I'm finding pictures that seems the same as the MT09, but also others. Could you maybe send us a picture of your headlight (when you already have the bike :-))? www.retrofitlab.com
@nabgee48635 жыл бұрын
Not the same headlight
@sped1053 жыл бұрын
Taking my 2019 MT-07 headlight apart now, it's the same as the one used here.
@melvinharris14375 жыл бұрын
Which bulb does it fits with the kit, regular h4?
@Retrofitlab5 жыл бұрын
The bi-xenon used in this kit can hold D2S/D2H bulbs. We are also working on a version with a Bi-led projector :-)
@Shaded4 жыл бұрын
5:39 can you paint that part in black from the outside?
@Retrofitlab4 жыл бұрын
Sure, no problem! And it is also available in gloss black :)
@cassianoaragao38916 жыл бұрын
Top !
@mtbiker18065 жыл бұрын
will dis light off the yamaha mt09 fit in the yamaha mt07 2018?
@Retrofitlab5 жыл бұрын
It seems like this headlight is the same, so it probably will, but we have not had the headlight here to check.
@gianikhbar7 жыл бұрын
where i can get this projector? and the part (frame) has include? sorry my bad english
@gianikhbar7 жыл бұрын
where i can get this frame for projector??
@gianikhbar7 жыл бұрын
replay please..
@KawasakiZ-yd5fq7 жыл бұрын
www.retrofitlab.com
@sopheaksoung4322 жыл бұрын
How much for this?
@Retrofitlab2 жыл бұрын
We only have the kit's to do it yourself (see description for the links), we don't offer the retrofit servic, sorry.
@Junx12887 жыл бұрын
Do you guy have dealer in US?
@erkutsaka83467 жыл бұрын
Metal plate measurements ?
@erkutsaka83467 жыл бұрын
Retrofitlab ahahaha oke :)
@Alex-fy8sr3 жыл бұрын
Hello! Can you send it to Russia?
@Retrofitlab3 жыл бұрын
Yes we can :)
@Alex-fy8sr3 жыл бұрын
@@Retrofitlab How much will the delivery cost?
@Retrofitlab3 жыл бұрын
@@Alex-fy8sr For all the shipment costs, please see this link: www.retrofitlab.com/en/customer-service.html
@yapkokleong40223 жыл бұрын
Is there any sale?
@Retrofitlab3 жыл бұрын
Not at the moment, sorry. Please stay tuned to our website/socials.
@raulrodriguez-ys4iv4 жыл бұрын
Honda civic 2006 plis
@Retrofitlab4 жыл бұрын
Maybe in the future :-)
@dhonni77987 жыл бұрын
Good afternoon. Can you do it on a Honda Cb 300? Thank you.
@solucoescelularesbr6 жыл бұрын
Esse daí pega na xj6?
@Retrofitlab6 жыл бұрын
Nós temos isso para o XJ6 :-) www.retrofitlab.com/en/yamaha-xj6-md2s-1.html
@kaiann1004 жыл бұрын
Tem outra mt03?
@kaiann1004 жыл бұрын
Pra *
@Retrofitlab4 жыл бұрын
Sure, please see this link: www.retrofitlab.com/en/yamaha-mt-03-2006-2014-1.html