Yamaha MT-07 FZ-07 De Cat Standard Exhaust Pipe Mod

[@TheAhmet1227]

Whats is change ? I cant understand.

[@Marco-cl9pb]

From the video it's really hard to tell the difference, can you tell me if it sounds any better or louder? Any audible backfires decelerating? :p I don't want a really loud exhaust just better airflow and maybe a little nicer sound, also thinking about removing the cathalitic converter

[@chipchapchopreturns]

no backfires, deeper sound, people look up and see me coming, about 15% louder, deeper on the overrun, but not like aftermarket pipe

[@Marco-cl9pb]

@@chipchapchopreturns thanks

[@JeanMelim]

Hi... very good mod. One question: what should i use to weld back the exhaust? Mig is ok? Thanks

[@chipchapchopreturns]

Mig will be fine, if you use stainless wire it will not rust, or use steel an paint over it

[@JeanMelim]

chipchapchopreturns i have ss wire. Thanks

[@apriliaaars]

any isuises after 2years?maybe runs more smooth on low speed and rmp?

[@chipchapchopreturns]

still runs very well, had service and plugs were checked, so no running issues there.

[@NickStaib]

Neat job but it doesn't sound very meaty afterwards... Probably louder (without the cat) but not the sort of deep rumble/bark I'm getting from my Tec exhaust which is a straight through system.

[@chipchapchopreturns]

Hi, will NEVER be as loud as a TEC, has a rumble on the over run and now people look up when it comes up the road, camera phone does not do it justice. Does seem to pick up quicker. I did fancy a TEC but too noisy for me, plus this was only £35 and 2 gaskets, and its road legal, TEC and Black Widow short cans are not CE BSAU approved so no good where I live as `i would just get Knicked

[@MotoGoato]

@@chipchapchopreturns do you live in Germany by any chance?

[@chipchapchopreturns]

@@MotoGoato no

[@chipchapchopreturns]

@@MotoGoato no

[@Yeah1Buddy]

Did you get a check engine light or anything?

[@chipchapchopreturns]

no, if you turn on the ignition with sensor unplugged you will

[@o1diesel]

Has the power risen? Aren't you feeling gasoline after the ride? Thanks Zdenek CZ

[@chipchapchopreturns]

picks up quicker, gas the same

[@truelightshining]

How about the exhaust fumes? I’m concerned about the smell.

[@chipchapchopreturns]

stick a clothes peg on your nose

[@TheShiningMountain]

Do you know the type of metal for welding, steel or Ali? Did you TIG or MIG weld it? Cheers

[@chipchapchopreturns]

tig, just fused existing back together, it can be mig welded with stainless wire

[@devilsfootball72]

@@chipchapchopreturns what kind of amps did you use. Welded pipe for years About to do one for my buddy and ive never welded anything as thin as the new exhaust he has.

[@chipchapchopreturns]

@@devilsfootball72 low amps as possible, just fused existing metal back together with tig

[@10fantic]

Wow, I hope you had some breathing protection. People do not realize what's in catalytic converters, the mesh you started drilling into.

[@chipchapchopreturns]

platinum in the uk

[@SirLoinofBeef235]

Yes, why meth heads steal them here

[@Marokaan1919]

does this mod have consequences on performance? Fuel consumption? Anything?

[@chipchapchopreturns]

Hi, its runs better, quicker pick up with no flat spot, fuel consumption settles down as to start with I kept giving it large. Runs as nature intended

[@Marokaan1919]

chipchapchopreturns thanks for the answer buddy, i might consider this option untill i saved up for a akrapovic! Great content :)

[@jordanenriquezbitchnigga9117]

Of course it does it has less restriction in airflow

[@jordanenriquezbitchnigga9117]

chipchapchopreturns it probably picks up faster due to it running lean

[@chipchapchopreturns]

@@jordanenriquezbitchnigga9117 runs richer as cat is restrictive

[@anthony269511]

Def sounds better, will more than likely follow you and soloseff on that, is it just that one honeycomb piece that you took off? Or was there more? Great job btw

[@chipchapchopreturns]

Hi, just one cat in there, glad you found it useful

[@sergejrabizo6640]

Look good for me :)))) I sow 3 options regarding standard exhaust upgrade. I will do decat tomorrow:))))) did you check bike on stand after ? How do you think is a map required?

[@chipchapchopreturns]

runs fine no remap req, runs richer without cat.

[@sergejrabizo6640]

Thanks. So that's my plan for tomorrow;))))

[@chipchapchopreturns]

how did it go the decat

[@sergejrabizo6640]

chipchapchopreturns yeah :)))) just need welded back:)))) that's plan for this week :)))

[@stefangiurgila7807]

Sergej Rabizo did you do it. Does it sound like an aftermarket full exhaust or a little quieter?

[@bayouboy771]

How hard is it the get the stock exhaust off and back on ?

[@chipchapchopreturns]

easy, 5m mins off, 10 mins on

[@frankstocker5475]

Now you let the Cat out of the bag.

[@danilocardoso3420]

good , more good, could you make a more detailed video?

[@chipchapchopreturns]

yes

[@kitchenscience324]

Did you flash afterwords?

[@chipchapchopreturns]

no need runs richer, runs better

[@chipchapchopreturns]

no need to, runs richer, runs better, stock pipe still has plenty of back pressure not like a black widow with no baffle.

[@ptmxtwo]

"Much cheaper than some of the aftermarket alternatives and not too noisy." i still find it hard to believe folks send hundreds of US dollars for an aftermarket exhaust. more money than sense imo.

[@stefangiurgila7807]

p. m. Id just get the aliexpress full exhaust with any muffler you want and boom. With less than $150 you have a full aftermarker exhaust then get a ecu or a fuel controler and your done

[@nate4451]

Because some people want an exhaust that doesn’t sound like shit. Normally depending on the bike you can throw kinda a cheap exhaust on there and it won’t matter. This isn’t one of those bikes. The high end exhausts like two bros sound way better than this

[@choraodamto9anne835]

OLÁ TUDO BEM COM VOCÊ AMIGO EU SOU DO 🇧🇷E VIM CONHECER SEU CANAL E SEU TRABALHO FICOU MUITO CHAVE 🤙MEGA LIKE,,,

[@lucaskich3908]

CHORÃO DA MT O7 ANNE com certeza ele n fala português

[@rasec1889]

lata salvaje apareció

[@smotik]

Still sounds like a scooter imho ;) I would rather invest 300 € into a black widow which sounds proper and is cheap.

[@chipchapchopreturns]

I bought an anodising check out the videos

[@samwads.]

Sounds terrible. Also you could have sold the cat for scrap before you destroyed it.

[@chipchapchopreturns]

Stuck in had to be drilled out, got anodising pipe now so it was a good stop gap until cheaper pipes were available, actually it run very well

[@rawmaterials3909]

"yeah, who cares about pollution? let's make noise!" And these guys think they're SMART...

[@chipchapchopreturns]

@@rawmaterials3909 noisy pipes save lives

[@rawmaterials3909]

@@chipchapchopreturns keep believing that. Anyway, polluting the atmosphere kills many, much more than having an "audible bike". 🤣 Come on...

[@chipchapchopreturns]

@@rawmaterials3909 try filtering in busy traffic it works

[@rawmaterials3909]

@@chipchapchopreturns Been doing that for 15 years with stock exhaust bikes. Never a problem.

[@simonthomas5367]

But it still weighs a ton and looks like an ugly Vespa exhaust

[@chipchapchopreturns]

bought me time till i got a £109 anodising

[@mkobboy1416]

It's a ridiculous move, the catalyst is necessary for health and should stay in place, a much fuller sound can be achieved by just changing the inside of the boiler.

[@jmrodri7020]

He echo este proceso y no lo recomiendo. No suena mas fuerte y ademas hace un sonido algo extraño parecido a vibración. Algunos escapes de marcas también lo hacen. No pierdan su tiempo y dinero, es mi humilde opinión. Yo gasté 100€ en un escape original(ya que no lo hice en el que lleva la moto de serie), la modificación no me costo nada pero ahora tengo que venderlo y comprar otro bueno. Saludos

[@ChoroAtivo]

Obrigado pelo relato.