Yamaha MT/FZ/XSR/R3 - LCD Flip Perfected **Pre-Cut EASY**

ColorClusterz offers a pre-cut LCD flip for the Yamaha fz07/09 and fz10 model. It is laser cut and a direct fit for the perfect LCD flip.
They can be used with the ColorCluster for a unique affect.
Get yours now at colorclusterz.com/
Shoutout to MotoSouth for giving us the idea to get these laser cut. For an installation video of the Fz09 model go check out his video!
• MT-09 FZ-09 LCD Flip

[@averagefz0749]

Link in description to get yours now! As I said in the video I had to redo this video twice so I had to re install the material on the dash. When you first remove it there will be residue but just use some heat, goo gone and a razor blade to get it off! It’s pretty easy! Thanks everyone for the support!

[@adone111]

What can I use instead of a razor blade to remove the glue residue? You say it won’t scratch the screen but still don’t want to try it!

[@TofuProductionCinema]

I'm about to pick up my 2020 mt-07 tomorrow.. this mod looks so promising, can't wait. Thanks for a great write-up.

[@averagefz0749]

Thanks! Can’t wait to see it!

[@VoxYokai]

great tutorial, this'll be my first mod when i get my hands on an MT

[@ReevyMotovlogs]

Awesome product and great video man, I might look into getting one in the future.

[@averagefz0749]

Reevy gonna look sick on your bike! Thanks for the support!

[@frolledolle4738]

Great vid brother man! cant wait till i get mine :D

[@AJpro88]

How much hp does it add?

[@averagefz0749]

the exceptional egyptiaN +5hp. +10hp if you install it with the ColorCluster 😜

[@Finterifyell]

Looks so good. Is this easier to read in direct sunlight or the stock one?

[@averagefz0749]

Finterifyell yeah the black makes it easy to read! Probably the same as the oem one.

[@nitehawk4067]

Any visibility issues with polarised sunglasses ?

[@mogan23z]

You should show how the colour clusterz film look with the LCD flip

[@averagefz0749]

lots of photos of this on the colorclusterz ig page!

[@PokerMuppet]

Easy enough except I really struggle with the sticking down part. Every time I peel off the adhesive layer, no matter how clean my surface is (an I do dab the screen with remover stickers), dots of dust seem to be attracted to the film so I end up and a few tiny but visible bubbles that can't be pushed out.

[@Youknowthebo]

Hey mate. I have purchased the LCD flip, but I haven't been able to install it yet. Will do it soon. I was just wondering, because I don't have goo gone available, do you think I can use something else to remove the glue residue?

[@DirtyHammmer]

Bo Ismono I hear wd40 works

[@Youknowthebo]

@@DirtyHammmer Thanks. I use WD40 to remove glue residue on the tank or other surfaces. However, I never glue anything back onto the surface nor is it an electronic surface. So I'm affraid that WD40 could compromise either the LCD or the "stickiness" of the LCD flip

[@averagefz0749]

Tbh you can remove it without any adhesive if you use a razor blade. It will take longer but the screen is pretty durable!

[@teddybearkillerful]

@@Youknowthebo I used isopropyl alcohol and it worked great

[@Gr33kChief]

Thank you, im wondering if the color option is installed differently?

[@averagefz0749]

MyNameStartsWithTriangles yes the color install is just laid on top of the lcd screen. There is another video on the channel showing it!

[@stevenly4085]

can you install both the flip and color? do you have any video of it if you did do that?

[@averagefz0749]

Hey! Yes you can. At the 6:15 mark it shows you how to install both together. To get some photo ideas on how it would look checkout @colorclusterz on instagram as they have a bunch of photos on there showing both!

[@kamarulzaman5153]

how to change Kmh to Mph on mter mt07

[@daltontignor4631]

What are good substitutes for goo gone? would electronic cleaner work?

[@averagefz0749]

Actually if you use hand sanitizer it works really well! Anything with a high alcohol percentage

[@Nindoty231]

Im doing this kit now on my 2016 FZ-07. I’m struggling to find a good adhesive remover. I had some old Goo Gone but it didn’t work. Any suggestions?

[@averagefz0749]

Hand sanitizer works surprisingly well too!

[@Nindoty231]

@@averagefz0749 ok I’ll give that a try. Thank you 🙏🏻

[@blakestuart9090]

How about 50/50 alcohol and water?

[@Nindoty231]

@@blakestuart9090 I used everything I could think of and ultimately it was Isopropyl Alcohol over 91-99% that took it off very easily. Thanks for responding though

[@blakestuart9090]

@@Nindoty231 The 91% worked but I managed to get air bubbles and can’t seem to get them out. 😡

[@andreasnordbustad844]

Is it possible to use hand sanitizer, to remove the remaining glue?

[@averagefz0749]

Yes hand sanitizer works great!

[@cameronbouillon7591]

What degree of polarity is the film you used (i.e. 0, 45, 90) ?

[@averagefz0749]

All the lcd flips on the website are pre cut so you don’t need to worry about that. If you need a sheet just email ColorClusterz and they can sell you one!

[@morickolaric7697]

Funktioniert das auch mit anderen Farben und dem LCD Flip in Kombination?

[@averagefz0749]

Yes you can use both the colors and the lcd flip together!

[@JenGa090]

My screen is very sensitive to daylight. Did I something wrong? Thx for help

[@averagefz0749]

What do you mean sensitive to daylight?

[@Jusaain]

do i need to buy the lcd flip too? or can i just buy the colorcluster?

[@averagefz0749]

Lcd flip - changes it to black ColorCluster - adds color to the dash. You can buy whatever you want!

[@andreaghe85]

I installed it in my mt-07, is it normal that the background tends to blue in the dark?

[@averagefz0749]

Yes in darker conditions it’s blue. In the sunlight/brighter conditions it’s black

[@cologneuprising9056]

What if you would heat up the old lcd screen?

[@averagefz0749]

Yes heating it up will help remove the old material

[@AP-wu1rv]

Can you install this and also have like purple on it

[@averagefz0749]

Hello yes you can!

[@rokyszigisrokyszigis2384]

Hi. Where I can get flip? I try ebay, nothing there 🤷‍♂️

[@averagefz0749]

www.colorclusterz.com is the only place

[@jdh8835]

So I guess this will all fix all the scratches on my screen too

[@averagefz0749]

If you have any screens on the actual lcd screen then yes. But if they’re just on the casing check out my other video on how to remove those!

[@jdh8835]

@@averagefz0749 awesome thanks

[@GIXXRBRAH750]

For some reason my screen looks exactly the same as yours did when you removed the OEM one and I though oh well my ones already removed as soon as I put the colorclusterz flipped LCD just went black til I removed it then it worked again

[@averagefz0749]

Yeah you need to remove the original material or it won’t work. Its hard to tell the original material is on there as it’s clear

[@Sunny_Obi]

How does the filter change the displayed digits from black to white? I get that it changes the background colour but the digits just has my mind boggled.

[@techoutsider2801]

It changes what is white to black and black to white. It’s just the affect of the polarizer at a specific angle.

[@Sunny_Obi]

@@techoutsider2801 thank you.

[@ddxmt07]

Weiß jemand ob das in Deutschland erlaubt ist bzw ob es dadurch Probleme beim TÜV oder einer Kontrolle geben kann?

[@averagefz0749]

I know a few people in Germany who have had this on their bike for the past year and haven’t had any problems.

[@johnnyseyer1260]

Hat du dir das geholt wills auch unbedingt?

[@flashraveking]

Hätte die selbe Frage, gibts schon ein Update? Ich denk aber das fällt eh keinem auf

[@marcios.4069]

How about visibility during the day in the sun with the negative display?

[@averagefz0749]

The negative display actually comes factory on the Mt09 sp version! So there is no problem with visibility in the sunlight

[@keithwwalker]

Vitpilen 701?

[@averagefz0749]

You can buy the DIY kit on the website for the 701!

[@hectorguinot1996]

Have you got a discount code?

[@IIWhite-TigerII]

bikelifeofginger