Yamaha Phazer Wheelies in Snow and Water "Super Red"

[@guyincognito1431]

Coolest sled ever. This dud not only knows know how to build a killer sled he knows how to ride one. Well done my fellow Phazer man.

[@NathanLarson01]

You should make a video talking about everything you've done to this thing

[@bnstr4876]

Preach!

[@davidjacobs3888]

Just change your clutch

[@isaacbeauchamp8918]

@@davidjacobs3888 can I just put any clutch on my 2002 mountain cat 600, cause them things are gutless

[@jooks4days261]

Hell ya I grew up on those phasers, still have the one my grandpa bought new in 87. RIP

[@jerrythechainsawguy8100]

This is the coolest phazer I have seen yet

[@PlayerOne306]

Totally agree with you on that I’d like to have that up here in the NWT while hunting beast of a machine

[@snowmobilingburberry]

My 89 phazer was definitely not doing that back in the day with its stock track. Great vid. I want my old phazer back now!!!! Great play sled.

[@trevisanabc]

So do I. Regret selling mine. Just didn't have a place to keep it'

[@tpghl5225]

it's hilarious to see this little phaser pull mad wheelies like no tomorrow lmao

[@vinjane3526]

I had a phazer when I was in high school, it wouldn’t do that!!! Great sled for sure!!! One of my favourite

[@SwapSupra]

Mine wont do that ethier lol, i need more grip!! Feel like i got a damn slick for drag strip always spinninn

[@SPENJERE]

Oh wow, this brings back so many memories of great times, bought a Phazer brand new in 1988, LOVED that machine ❤ !

[@kurtlemderman2032]

These sled's are scary fast Yamaha was ahead of the curve with that design

[@aaronbrown2966]

sweet!! skills man, is it just me or have old phazers gained in popularity last couple years?

[@IsayeNstuff]

Yep it does when i bought mine 4 years ago theres was no video on youtube but now its full of it

[@douglasswawola3138]

He isn't even good my dude nothing is after market only thing is the pipe

[@brandenpaul8445]

Douglas swawola nothing but the pipe V force reeds plastic skies different suspention track set up you know just nothing but a pipe🤷‍♂️

[@legendfpv]

and clutching, limiter strap, jetting, etc @@brandenpaul8445

[@tomchrisfield7348]

Just goes to show you that you don't need a brand new sled or 3 wheeler to have a lot of fun. Talented rider.

[@matthew4084s]

Best phazer video ever

[@laatschmovies]

The rear is in the longest hole. The front straps are lengthened beyond the original limit. Look at the suspension in the video, and you may find other modifications.

[@S0u11ess]

What gear ratio are you running?

[@timhudak03]

The suspension is out of a newer yamaha. Like a late 90's vmax xtc or a yamaha pro action.

[@laatschmovies]

@@timhudak03 The suspension is out of a 1989 Yamaha Exciter.

[@DurisM]

That 509 sticker is exactly where it is supposed to be if you shred vertical wheelies on a classic Phazer.

[@jooo9374]

Those wheelies and driving skills!

[@cj-ws7vy]

That is the sickest phazer ive ever seen i had a 87 exciter 570 that couldn't touch that thing nice sled

[@gamesandstuff5170]

Love those three wheelers

[@will7its]

You got that thing piped out son.......💪

[@pantherplatform]

Wow. That twin snowblower carbureted 440 sure hauls ass!

[@nathanbrisson8515]

485cc

[@shavedape]

It's also modified with Aaen pipe and apparently (by sticker) VForce3 reeds etc. so more than the stock meek 56 hp.

[@laatschmovies]

It totally depends on the sled, and the snow conditions. If you have the right mix, it can be quite easy and fun!

[@lucasfromdavalley]

Real Time Movies I meant is it very hard to carve a phazer???

[@lucasfromdavalley]

I have carved sleds before but never my phazer yet bc we only just got some snow and just barely enough to ride let alone carve

[@laatschmovies]

When the're stock they really don't carve very well at all, but with enough mods they really rip!

[@sender6994]

Real Time Movies how did you make it wheelie? What of all is don’t to it?

[@laatschmovies]

Read through the comments, we're giving out a few hints.

[@aceyorba]

Awesome stuff...

[@trevisanabc]

Was just putting my '87 Phazer, stock, with Comet 102C clutch, 6K miles on Craig's list, Runs great with newer Pistons/ Rings, Boysen Reeds. Re-thinking after seeing this!

[@MrRawtech]

Very nice sled ;)

[@joesnowmobiles]

That was pretty epic!

[@jamiemacdonald3466]

Beauty old sled dude

[@PartTimeYooper]

Awesome sled!

[@toddjacobs5660]

Thing runs good, i had a 1990 Phazer 2, & an 89 Exciter 2, both bought new, both ran great, is that a 1990 Phazer in the back ground on yr vid.?

[@laatschmovies]

It's a 1991 Phazer ST long track.

[@Timcanniff311]

Never seen a old phazer do this!!

[@mikeofmanymikes2630]

I rode one for a couple years and it was a blast.

[@ArcticJeff]

I'm guessing it doesn't have stock gearing? Front end was awfully light and it had lots of low end 'spin' when carving in the deep snow. Either way, looks like a fun sled to ride.

[@laatschmovies]

You said it!

[@ZvNiTrOoZvZ]

Love the setup!

[@lucascady4992]

That's freaking awesome!!!

[@Northernc10]

What’s done to this thing haha, i saw this video and im going to buy one this weekend

[@michaelblankenship7278]

Pretty dope! That things come a long way from stock.

[@leeonprince8411]

I never knew how fricken amazing Phazers were. I have a Phazer too and it’s a long track, she’s my baby😤

[@benmenard2872]

What did u do to make it wheelie? That’s wicked

[@tpghl5225]

Ben Menard skill

[@laatschmovies]

Lots of redesigning and experimenting.

[@PlayerOne306]

Holy shit that thing rips right off the ramp ❤️

[@jayv17]

As a PZ guy for years, I’ve never really gone far from stock- also a water crosser, never made any distance on a phazer- use skidoos for that- watched this and mind blown- absolutely insane, WTF!!! And how did you do it??

[@custernavarone2244]

Now I want a Yamaha phazer

[@toddjacobs5660]

I bought a brand new Phazer 2 back in 1990, for my wife, they were fun little sleds, what all did you have to do to make it have the extra ummmpfff ?

[@cadenguggisberg4899]

How much have you spent including price of sled? And what size track?

[@kenharty6016]

Im impressed.

[@lilmememan9544]

Dude that sled is hot

[@Steven-hi3pk]

I want that snowmobile

[@brapperdan]

Will the stock one do wheelies like that? I just bought one but don’t have snow yet...

[@therealakalaska9485]

lol HELL NO

[@laatschmovies]

Nope! Not without a lot of suspension adjustments, different track, clutching... and the list goes on.

[@rewadena4371]

Lol some ppls kids!!

[@sender6994]

What size lugs are on the track?

[@laatschmovies]

1.25" lug Kimpex shotgun X

[@sender6994]

Ok thanks

[@evilescargo9079]

looking at getting one right now

[@billykenyon542]

Where did u get the skid track and exhaust

[@PhilVision2007]

sweet video. nice cold air intake!

[@haydenward8285]

that thing debatably does a better job then my 84 safari 377

[@snusmumrik3826]

is it the stock engine? and/or what mods have you done to it?

[@laatschmovies]

It has a standard Phaser engine rebuilt, with 2nd over bore. V-force 3 reeds, Aaen pipe, re-jetted stock carbs, and a cold air intake.

[@aaronbrown2966]

MIne is on its second overbore too, lol not sure if it has room for another, did the math but I forget now I think it is about 500 cc now.@@laatschmovies

[@KAZT4R]

Very good, indeed!😃⤴️⤴️

[@JayTheFirst]

i have a 91 phazer and it boondocks like mad, only problem is you gotta clean out the fan when it packs with snow. edit: she blew. time for a top end this fall!

[@user-bd5md5cm2j]

Put a Polaris or skidoo rear end under it. Have your driver's switched to 8 tooth instead of 9. Port and pipe it. Put a 147" x2" track under it. Completely new machine.

[@lucasfromdavalley]

Is it very hard to carve?

[@timmyteabag69]

RB26SNO no old sleds are very easy to carve due to the narrowness of the machine

[@Jaakko69]

I have a 2000 phazer and it is easy

[@dareblack7265]

Good job

[@seancosby9269]

This reminded me of when the track belt broke on my old ski doo Olympic 340 and I could wheelie for miles

[@derriklee287]

You can wheelie with a broken track? That's impressive

[@seancosby9269]

@@derriklee287 lol track belt

[@soucyboy8886]

What mods did you do to wheelie like that

[@laatschmovies]

2 years of adjustments and modifications. Basically, everything needs to be working like a top, also you'll need to get super torque with low gearing, and do suspension mods.

[@simba700r9]

Is it stock if not what is done to it

[@josephoverbeek1190]

What does it top out at with the gearing

[@laatschmovies]

About 80 mph.

[@nikdag691]

I have the same sled but mine doesnt take off as fast as yours any idea why? And my rpms only hit 5500

[@bridesigns207]

Did you play with the limiter strap?

[@laatschmovies]

Sure did, extended it beyond it's limit.

[@bridesigns207]

@@laatschmovies That's awesome. I have a 94 Vmax I hope to do this to.

[@user-bd5md5cm2j]

@@bridesigns207 switch out your rear suspension with a Polaris or skidoo. Weight transfer actually works right. Put a 147" x2" track on it. Pipe it. Watch that sled keep up with sleds 20 years newer

[@brianames3074]

@@user-bd5md5cm2j That's an amazing machine you built yourself!! Great video.

[@elijahgorman2038]

Where did you get that track? Also is it stock length because it looks it?

[@laatschmovies]

It's a Kimpex Shotgun X 121".

[@elijahgorman2038]

@@laatschmovies what are the specs so i can find the same exact track

[@turbotankz2381]

What’s all done to it

[@Mat253]

Holy F*(#!!! What a machine!!!

[@justinl5123]

What is done to it

[@kekyko9951]

Fawk yeah! Good stuf

[@joshguitar7206]

what can is on this sled

[@laatschmovies]

Aaen Pipe.

[@seakfpv6069]

What does everyone love about phazers? They are a cool looking sled and I see a lot of mods but why?

[@laatschmovies]

They are a great budget sled and are quite easy to modify and create your own sled with.

[@bolognabowl]

Buddy you RIP. Right on keep fuckin givinr

[@stephanieboucher9779]

Whrere can i find the v force kit for phazer

[@wbwb8459]

Stock?

[@matthewb7049]

This is a 540 right? I thought phazers only came with asingle carb. I gues its make/ year / model that depends on that ?

[@laatschmovies]

That sounds like a SRV. This is a 485cc 2 carburetor Phazer setup.

[@micskates420]

Xlv and srv 540 with single carb

[@matthewb7049]

Huuh guess im lost then cause i swear last phazer i seen had a single carb. But the again that wss like 10 years ago and im now 22 lol. I got a vmax 500 and it rips but nothing like this. People consider them to be "straight line" sleds. It needs a ton of work though. Bpught it ib grade 8 and have done nothing but put gas in it, changed the bogie wheels in the carraige. There shot again. Needs a good overhaul thats for sure.

[@xxxtenticals6035]

Belt sitting low my buddy Haha

[@laatschmovies]

Good observation! People ask about what parts are on it and that's why we take a look.

[@matthew4084s]

Love it

[@dirtrider88]

stock engine? surely the gearing and clutching isnt stock. obviously the suspension and track isnt

[@harperhigdon2507]

Is this modified?

[@tozer450rmz5]

Holy fuck!! This thing rip🤟 what is the setup?

[@brandenpaul8445]

Do a build brake down

[@marknothing5835]

Wicked!

[@markworkman9224]

I have the same track on my sled

[@Steven-hi3pk]

Oh my

[@boozin_n_cruisinpsn2999]

Stock engine?

[@laatschmovies]

It has a stock engine with 2nd over bore.

[@laatschmovies]

It's a 121" Exciter suspension, modified.

[@jeff5050]

if a sled was a sleeper lmao

[@fisherman695]

Send it !!!!

[@JerryJrsGarage]

Legit.

[@IsayeNstuff]

Post more videos 😂 love it what your set up i wanna do the same fucking things

[@countryboy-qk6qc]

We all know the limiter straps were taken out😂

[@voxpopuli905]

Omfg that’s a good running phazer wholly shit! LoL

[@morepower-4.6]

Damn!!!

[@deeptill6735]

Well crap...now I have to dig my old Phazer out of the barn!

[@lifeononeweel3008]

i have a 1996 yamha venture but i dont se any one modifying them!!!!!!

[@cjhhoule6166]

Wanna sell it?

[@brapperdan]

Please make video detailing the mods!

[@waylonthompson1149]

Looks nasty for that lil old phazer😂

[@christofferfredriksson4643]

wtf how?

[@daddyrabbit835]

I have a 1987 Phazer and it won't do this.

[@lucasfromdavalley]

I am in need of subs and views feel free to give sujjestions because I just got a new camera

[@seakfpv6069]

RB26SNO subbed bud

[@lucasfromdavalley]

Akisland Driver thanks for subbing and sorry I’m late

[@garyburbank4559]

Bad ass what have you done to your sled my dad and I went in on a package deal 2 Yamaha Exciter II 570's aftermarket Sno Pro exhaust after market mikuni carbs plastic Skis my dad is my dad upgraded to mikuni 700cc carbs and they make his sled run like a totally different sled its been clocked at 115mph with more to go I have mikuni 600cc carbs I'm thinking about going with the 700's like my dad my wife and I also have a 1974 Skidoo TNT440 Dyno Port exhaust Mikuni carbs 1990 Skidoo Safari 440 Dyno Port exhaust Mikuni carbs and a 2000 Skidoo MXZ 440 Dyno Port exhaust Mikuni carbs and we gave my younger brother a 1976 Rupp 440 for his first sled and he loves it he takes care of it better than these young kids do their brand new sleds

[@keeganbovee4292]

That’s not how there supposed to work🤔

[@tylerauger2282]

Fuck that cant be a phazer motor in there

[@tobiasholst8946]

That phazer cant be stock

[@TheCuttingtorch]

This will decimate all after about $10-15 grand of parts ordered from Japan..

[@VitekkNoss]

Я также хочу !! Ау