Yamaha R15 V3 Carbon Fibre Wrap In India: Here's How I Did It

When I bought the 2018 Yamaha R15 V3, the goal was simple. Ride it on the race track, gain enough skills and apply them to my bigger bike. Little did I know that I would fall in love with this mini-supersports package so much that I would end up customising it to this extent.
I have made a lot of mechanical upgrades to it already (documented as videos on this channel), and now it is time to up the ante cosmetically as well. I love the Yamaha Blue, but I think instead of glossy black, it goes better with carbon fibre finish.
I got all black parts of my bike wrapped in carbon fibre vinyl. That includes the front fairing, front mudguard, all the area around the instrument console, the black strip that runs across the spine of the fuel tank, the panel behind and under the pillion seat and even the little rear mudguard.
Material used: Generic carbon fibre vinyl wrap (Quality is not bad, but in no way is it comparable to 3M wraps)
The cost: Rs, 2000, including labour
I was very happy with the wrap, but after a point, it started to come off from a couple of rough plastic edges. I was warned about that when I got it done - that it won’t stick well to non-glossy, rough surfaces, but I still insisted and got it done.
I got a lot of queries on KZbin, Instagram and Facebook about this wrap, so I thought why not get it fixed and make a video for you guys as well.
And so, here it is.
I’ve tried to keep it simple and linear. The video is pretty much self-explanatory.
But let me tell you about how the wrap is holding up, since I am uploading this video a month and a half after shooting it.
It is doing just fine. Hasn’t come off from anywhere, and the secret to that is all the edges that don’t show, put black electrical tape on them. That keeps the wrap extremely secure. It should, in my opinion, last a year, easily.
I would recommend hiring a guy who has some experience doing this, otherwise you will end up with a lot of air bubbles and rough finish. It is not very expensive either.
I hope I have covered most queries about this carbon fibre wrap in this video. If you have read this description this far, please leave me feedback on the video. The edit, the music, the pacing, the structure, the content. It would mean a lot to me and help me improve leaps and bounds. I am relatively new at this. Using my phone and GoPros to shoot and basic iMovie software to edit (which I absolutely don’t know how to).
To watch my videos on the Yamaha R15 V3, you can head to my channel here: bit.ly/2JrNvIt
There are some awesome videos there, including a top speed run of 158 kmph: bit.ly/2NSkvwI
And a top speed run with the Daytona exhaust: bit.ly/2uLG1ev
A radially mounted master cylinder install to improve lever feel: bit.ly/2Ll4ZaY
Upgraded Brembo front brake calipers: bit.ly/2zEpyOl
And a small preview of the Daytona exhaust including a fly by: bit.ly/2uDMlEh
If you want to connect with me, you can find me on:
Facebook: / abhinav.bhatt.94
Instagram: / abhinavbhatt19
Thank you so much for your time. Cheers

[@amritaray1374]

Will definitely help people who are in two minds about investing in carbon fibre. Good work!

[@abhinavbhatt]

Thank you, Amrita :)

[@criticalacclaim6928]

Honestly your accent is much better than most of the Bollywood stars. By the way R15 V3 looks stunning. NS rider here. Stay safe ✌️ Edit: New sub 😁

[@abhinavbhatt]

Thanks Lio. Have you ridden the R15 V3? If so, what's your take on it in comparison to the NS200.

[@criticalacclaim6928]

Abhinav Bhatt No I haven't and that saddens me. None of my friends have V3. Mostly ns200, KTM and V2.

[@abhinavbhatt]

It is the opposite for me. None of my friends have Pulsars or KTMs :)

[@criticalacclaim6928]

Lol let's switch sides 😁

[@abhinavbhatt]

Hahahhahah. Sure. Why not.

[@shamsheermadan4591]

Hats off to you for replying to each and every comment, even those who have been answered in the video. You are doing a great job!

[@abhinavbhatt]

Hi Shamsheer. If someone has taken the pains to watch what I have to say and have a question, it is only fair that I answer their queries. Thank you for the kind words. Cheers :)

[@vishwaacharya7943]

Bcz of this kind words I'm subcribed ua channel now...hv grt succs..

[@abhinavbhatt]

Thank you for subscribing, Vishwa :)

[@AbhinavJarwal]

I gotta say man this is some fine craftsmanship for the money that's being charged i got my front forks wrapped from Karol Bagh and they did a pretty sloppy job but this right here is some precision work will try to get the wrap replaced from this guy

[@abhinavbhatt]

Sure, man. This guy is pretty decent. He wraps cars, superbikes as well. Cheers

[@sagarmore4200]

The motorcycle looks epic no doubt. But your beautiful gesture of properly giving the credits to Mr. Sachin makes me feel sooo good! ❤️ I wish there was a Sachin in Mumbai, too 😉😭❤️

[@blackpinkishinyourarea8973]

For the whole body part to prevent from scratches , i recommend u to do a SERAMIC COATING, your bike will looks shining all day long for 3 years like that. 😊

[@abhinavbhatt]

Ceramic coating is very expensive, man. I can probably buy new panels for the bike for that money.

[@joyridewithayan1505]

Had been waiting for this video from ages! Yes after wrapping the entire front panel, it looks meaner. Great mod for a great motorcycle. Love it. ❤️

[@abhinavbhatt]

Thanks, Ayan. Hope the wait was worth it. Cheers

[@joyridewithayan1505]

Absolutely worth it.

[@ganeshsarki3385]

Brother actually you deserves more thn million subscribers❤

[@vsoldierz9640]

I love the way you thanks labours which we don't see in now days bikers.

[@abhinavbhatt]

Must give credit where it is due :)

[@motowolf32]

I have somewhat similar carbon fiber cosmetics on my R15V2. I got it done in Karolbagh around 2-3 months back in just ₹800 but the amount of work done is much lesser than urs. I must say they did a pretty good job!

[@abhinavbhatt]

Thanks, Ahmad. Why don't you share some pics/videos of your ride. Would love to see. Cheers

[@motowolf32]

@@abhinavbhatt Im already working on a new video of my last ride. I post pics/ vids on my insta account: @moto_wolf_ ✌️😄

[@abhinavbhatt]

Cool. Will check it out.

[@motowolf32]

@@abhinavbhatt Thanks a lot mate😃

[@anandcherian.585]

Great video man. You get the r15 v3 serviced regularly right. So the next time can you film the entire process and upload it. It will be useful for all the DIY freaks out there. More over its basic maintenance every v3 owner should be aware of, right?

[@abhinavbhatt]

Hey man. I did film the entire process of my second service which I did not get done at a Yamaha service centre, rather a superbike workshop. I still have to edit the video. Let's see when I get the chance to do that. Cheers

[@anandcherian.585]

Abhinav Bhatt that would be immensely appreciated

[@Dheeeeraj]

Great set of videos. Watched them all, very insightful too. Keep posting, also when can you make a Q&A video ?

[@abhinavbhatt]

Hi Dheeraj. Thanks for the encouraging words. Why don't you ask me whatever doubts you have, and I will try to answer them to the best of my abilities. Cheers.

[@Dheeeeraj]

@@abhinavbhatt Your Modifications (Please excuse if I get them wrong) Master Brake Cylinder Brake line (Pulsar 220's) Brembo brake pads Radiator grill Daytona exhaust Stickier rubber (Metzelers) No rear footpegs I wanted to know if I can do all those mods on my bike too ? I own a Yamaha YZF R15S (Mainly the brake setup and mods regarding brakes)

[@abhinavbhatt]

Yes, of course. Why not. In fact, all these mods paid off this Sunday. A dog came in the middle of the road from nowhere while I was overtaking a car at high speed. I was barely 10-20 metres from the dog when I slammed the front brake and the bike stoppied and halted a few feet from it. Definitely saved the life of the dog and mine. All the money I spent I have already earned back. I have more brake updates planned. I have a 300 mm petal disc and a four piston front brake caliper that will go on the bike next. That's should complete my braking set up.

[@Dheeeeraj]

@@abhinavbhatt Glad that dog is safe and so are you. And woah, a 300mm disk with four piston calipers 👏🏻👏🏻

[@abhinavbhatt]

Yeah man. Stopping power always more important than BHP for me.

[@nirajtanti8618]

Re-Visiting ur old video to keep the memory fresh.

[@abhinavbhatt]

🙏

[@arifahmed760]

I love the finish of the Carbon fibre wrap and I even like the Bike Yamaha R1 5 V3 is the best bike in Indian market even I am getting the same bikes soon hopefully just because of your channel

[@abhinavbhatt]

That's some high praise, man. Thank you :)

[@udaytej4074]

Bro u r the real biker..u care alot for ur bike and spend so much money for customisation...☮️

[@abhinavbhatt]

Thanks Uday. However, I would like to make a point: a real biker is one who rides responsibly and doesn't get into my bike better than yours argument. Anyone can spend money on customisation :)

[@udaytej4074]

@@abhinavbhatt right said bro..

[@RohitSingh-ly3ph]

Bro I love your Bike u have maintained it very well and the modifications in your Bike is just amazing that nobody has done till now in it's new R15 v3 !!!!!!!! 😍😍😘😘🙏🏻🙏🏻🙏🏻

[@abhinavbhatt]

Thanks, Rohit. This is just the start. There is a lot more incoming. Watch out for it. Cheers

[@akashkumar-tu9wi]

One like for the beautiful way u r giving him credit.

[@hardwarefusion645]

Hey Buddy, thank you so much for this video. I remember requesting for this video just a few days back and finally here it is. I must say, the bike looks "Menacing" in a more macho sense :) Like I mentioned earlier, I am definitely getting the tank middle strip & the plastic panels around the console carbon wrapped for sure. But not sure where to get it done in Bangalore. Also, access to the panel on the tank looks cumbersome and unnecessarily tedious. So, yeah will have to get it done by someone skilled as well who can put it back again in one piece. Also, good luck on your other modifications pertaining to engine, ECU, USD forks and also the rear Ohlins. Would love to keep watching your hard work buddy. Enjoy & Ride safe..

[@abhinavbhatt]

Thanks brother. Yes, get work done by someone who knows their way around this bike and have done it before. I just hope all this hard work pays off and this bike becomes track ready soon.

[@jscontents9884]

Aftermarket Brake & clutche levers along with USD fork and with a rear seat cowl would give the bike more agressive look...

[@abhinavbhatt]

Yeah. However, difficult to source. Believe me, I tried.

[@jscontents9884]

@@abhinavbhatt the only way to get it is to import it from Indonesia but the custom duty charges will costs an absurdly high amount for the usd forks.. so i think it would even look great with aftermarket adjustable matte grey, blue or black levers...

[@abhinavbhatt]

I tried to get USD forks from Thailand. Had gone there to buy them, but it didn't work out. Remember, you will also have to change the front mudguard, upper and lower clamp, clip on bars.

[@jscontents9884]

@@abhinavbhatt yes that's another headache :P

[@abhinavbhatt]

Yup. Absolutely.

[@arunabhtiwari6681]

Bike looks beautiful after the wrap on bro😍❤️

[@abhinavbhatt]

Thanks buddy. More will come soon. Cheers

[@dsd-downshiftdave8056]

Looks extremely good!!

[@abhinavbhatt]

Thank you, Dave.

[@SaifKhan-pg8ss]

Heyy, where have you been it’s been like a month since you’ve uploaded a video. I remember you saying that you’re gonna change the ecu of your bike when is that video coming up? can’t wait for it! I really love your channel you give alot of information! I have a question I’m 17 now and have planned to get this on my 18th birthday I’ve done alot of research on this bike but just wanted to know from you is there anything that I’ll regret...alot of people have been complaining about the plastic is it really that low quality? Waiting for the reply! Hope you hit a million soon!🖤

[@abhinavbhatt]

Hello Saif. I have been extremely occupied with work and that is why I have not been able to make time for videos. But I will soon. Don't worry about plastics, etc. It is a non-issue. Quality of parts is good enough. Just enjoy the bike when you get it. Cheers

[@SaifKhan-pg8ss]

Thank you!!

[@DarkhorseXmusic]

Can you please make a video on and about the cowl for pillion seat. If you can, then please make one. Or, if you give me a link, from where I can buy one in India, I'll be grateful

[@Monsterino]

Really stands out and attracts a lot of eyes especially that aggressive look

[@abhinavbhatt]

Yeah man. Looks much better in person. Stands out.

[@OhNooJosephJoestar]

English sunke Sachin bhai Khush hogye 😄. The effort that he put in was great commendable

[@iamhashimirfan]

finally this video,best looking v3 out there bro🔥

[@abhinavbhatt]

Thanks, Hashim :)

[@pransai]

@@abhinavbhatt i want to wrap my V3 the same how much would it cost ?

[@mollaosmangoni2316]

At last it came..thanks for keeping our words.. Nice video😘😘😘😘 Cheers

[@abhinavbhatt]

Thanks Osman. I still have to shoot a walkaround video :)

[@mollaosmangoni2316]

@@abhinavbhatt sure 😊

[@abbasrangwala3757]

In thunder grey wrap the red parts with matte black and it'll look sick😍😍

[@abhinavbhatt]

I'm sure. Hopefully, someone will try and share a video.

[@karthikeyanhari7853]

Nicely done Brother, Ur V3 looks Awesome .. ✌🏾 Any idea what TRIP F is !? My v3 completed 1200km, this is the first time I see the trip f indication.

[@abhinavbhatt]

Thanks Karti. And no, I have not seen a Trip F so far.

[@adithya_k93]

Trip for reserve fuel.

[@dr.kaliprasadmishra]

Abhinav bhai finally buy r15v3 red colour after see all your review .. & vedios .

[@abhinavbhatt]

Congratulations :)

[@dr.kaliprasadmishra]

@@abhinavbhatt thankx bhai

[@abhinavbhatt]

Most welcome.

[@sawma3714]

They should consider a about maintaining their work space more clean and tidy

[@abhinavbhatt]

Yeah. That's something they need to work on.

[@mayur_jadhav3]

Wrap it all carbon with red accents! Would look dope!!

[@abhinavbhatt]

Interesting.

[@AKIndan-kt8wg]

Wish you a very happy New Year🙋🏻‍♂️ And please make some more videos

[@abhinavbhatt]

Happy New Year to you too, brother. I've half made my Interceptor 650 delivery video. Will shoot the rest of it tomorrow and edit. Cheers

[@AKIndan-kt8wg]

@@abhinavbhatt Thanks bro, You are my favourite Biker and my favourite KZbinr.✌✌👌👌👌🤗😊

[@abhinavbhatt]

🙏

[@DonaldCosta]

Finally alot about wraps thanks alot

[@abhinavbhatt]

Most welcome, Donald.

[@Prakgreat]

A lot cheaper than places in UK that do wraps... I think you should try spraying clear coat over the carbon wrapped pieces, then you would get that shiny CF look as on Paganis, etc... But liked it anyway

[@abhinavbhatt]

Hi Prakash. I actually prefer the matte finish. Once this wrap starts to come off, I will go in for a 3M carbon fibre wrap that is glossy. Should get that shiny CF finish then. And I love Paganis. Have a soft spot for the Zonda R ever since I drove it in Gran Turismo. Think I am getting that itch back to build another sim set up. Maybe a direct drive wheel this time with a proper chassis, shifter, load cell pedals and hand brake.

[@jhonakbar5958]

Hey man, you’ve got some pretty amazing content I’m literally coming to your channel everyday to see if you’ve put a new video. Work life seems to be hard. Do upload whenever possible 🤙🏻 Cheers

[@abhinavbhatt]

Thanks man. Yeah, am pretty caught up these days. I need to start editing my tail tidy video. That should be out in a week or so. Wish I had a bit more time to make some videos. Such encouragement keeps me pumped up for it :)

[@jhonakbar5958]

Abhinav Bhatt anytime :’) Saw your insta, seems like you’ve got a few accessories Really excited for them

[@abhinavbhatt]

Yeah. Will install them soon.

[@deepesh1995]

Subscribing because of the appreciation given in the end👍

[@abhinavbhatt]

Should always give credit where it is due. Cheers

[@deepesh1995]

@@abhinavbhatt A supreme quality only seen in the wise🍻

[@abhinavbhatt]

🙏

[@loditv3270]

Is this a matte black?. . Which one is better you prefer the gloss carbon fiber or matte carbon fiber?.

[@abhinavbhatt]

I'd prefer a gloss carbon fibre but that wasn't available.

[@lazynordinary]

Hey Abhinav, how r you? I had the similar carbon fiber finish on my Apache with 13 written on top of it in yellow. It looked killer IMO just like ur R15 is looking.

[@abhinavbhatt]

Hi Kunal. I'm good. Didn't Apache also come with plastic in carbon fibre finish?

[@lazynordinary]

Newer generation Apache had some carbon fibre plastic near the tank but not on the head.

[@abhinavbhatt]

Oh, okay.

[@kapildongre4510]

Loved the way how you explain us😊, jst suscriber after watching all your videos

[@abhinavbhatt]

Thanks, Kapil :)

[@Heyfriend0]

Definitely bike looks angry. Grrrr. It resembles the same black color v3 with red doom. Good going.

[@abhinavbhatt]

Thanks, Saquib :)

[@pr0xi858]

He did a great job and ur ride looks lit

[@abhinavbhatt]

Thanks, Ashish :)

[@ruyanguliepaphino6365]

Nice video..my question may be a bit unrelevant but what's your height?am 5'11 and planning to take one.

[@abhinavbhatt]

I am a shade under 5'11. The bike should be fine for you.

[@menlive8326]

4000 is a big amount for this wrapping. I did on my r15v3. It costs me around 120rs.(60rs/metre) I bought this carbon wrap sheet from nai wala. And wrapped myself. Easy task.

[@abhinavbhatt]

It came up to be 4,000 since I got it wrapped twice. Actually, three times. For all that I did, if it fits right in the first go, it will be about Rs 2,000. I most certainly wouldn't have been able to do it on my own. Why don't you share some videos of your work. I'm sure a lot of people will benefit from it. Cheers

[@menlive8326]

@@abhinavbhatt Sure i will on sunday??

[@abhinavbhatt]

Cool.

[@PallavBhardwaj-dry_ice_cool]

Great videos and have become a sub because your videos seem more down to earth than other moto vloggers, please keep up the good work. So I am confused on getting a new bike and thought of getting your opinion too. I have been a fan of Royal Enfield fan and have Thunderbird 500 back home... now I have joined job in Bangalore so was wondering to get a bike here, so I was thinking to get The Royal Enfield Himalayan BS4 as it felt different from other bikes in Royal Enfield due to low vibrations and cornering, also wanted to try the adventure types of bikes and this was the cheapest option to get into one. But soon I see they have the Interceptor and Continental GT 650 to be released soon... so *my question is should I get the the Himalayan right now or should I wait and get the 650 later? Just what you feel about the 650 from leaked and official videos and images.* I would be glad to get your answer also it would maybe be a good video Idea. I am a tall guy 6ft 4in btw and have plans to get a Harley Sportster Roadster in an year or two. :) thanks

[@abhinavbhatt]

Hi Pallava. Thank you for the kind words. Well, how urgently do you have to buy the bike? The 650 Himalayan is a year away at the very minimum. If you want a bike that would be comfortable for your size, why don't you look at a used Ninja 650. I reckon it should be about 3 lakhs max. And the engine is indestructible. It would take you wherever you want, and in relative comfort too. Or just wait for the 650cc Royal Enfield Interceptor. However, I am not sure how good the quality of that bike would be. I want to also recommend the BMW GS310 if you can stretch that far. No-nonsense bike that is built to last. And honestly, instead of a Harley, look at a Tiger 800. Would serve you well.

[@PallavBhardwaj-dry_ice_cool]

Oh I thought interceptor is gonna be released in November or December. But I can't wait for an year long. Also thanks for your advice on Tiger 800 looks great and would drive well too being a bike from Triumph but I never had a Adventure bike so I have to see if I like adventure bikes before changing my mind from Harley Sportster Roadster 1200 that being a sport cruiser. Personally I took test ride of of 750s and Iron 883 and 1200 but 750 did not seem like authentic Harley also too small for my body proportion. Personally if I have to get a cruiser from Triumph in place of Roadster 1200 it would be Bonneville Speedmaster. Also for your input on Ninja being a sports bike I don't know how easy it would be on Indian Roads. This here is gonna be my 4th bike as I had Karizma R, Thunderbird 500 and CBZ 150.

[@abhinavbhatt]

I think I gave you the wrong idea. The Interceptor will release around November. I was talking about the Himalayan 650. That is at least a year away. And don't worry about the Ninja 650. It is an easy bike for Indian conditions. And I would still consider you going in for an ADV instead of a cruiser. I've ridden all Triumphs and even own a Street Triple 675. Trust me, you'll enjoy the Tiger more than other bikes. Try taking test rides. Cheers

[@PallavBhardwaj-dry_ice_cool]

Thank you soo much for your time and yeah I have seen your Triumph street 675 video it was really good test as you tested it directly and while riding gave your opinion about it without any script. And yeah I will go for Adv if I get and like the Himalyan. The 310gs from BMW is attractive but I will go in those foreign brands like those for a powerful bike maybe the Tiger 1200 or BMW R1200GS but I wanna try to know what an Adv really is before it. Having personally Karizma Thunderbird and CBZ, cruiser became my favourite going long distances so was leaning towards Harley. Thank you soo much for your time and Ride safe. Peace ✌

[@abhinavbhatt]

You are most welcome. If you do get a big ADV, don't get the 1200. 800 more than adequate for all our conditions. Nice chatting with you. Cheers

[@anantjain540]

Great channel man!!btw glossy carbon fibre would have looked even more sexier

[@abhinavbhatt]

Couldn't find it, Anant. Maybe in future...

[@anantjain540]

@@abhinavbhatt keep up the good work!

[@abhinavbhatt]

Thank you

[@MG-cy7jv]

Golden rims??? These aren't stock i guess!Where did u get these painted?

[@abhinavbhatt]

Karol Bagh in Delhi.

[@アンドリューエデン]

you can take off the tank cover without remove tank cap bro.

[@abhinavbhatt]

Thanks

[@abhishekrathore2586]

Very nice of u to give credit to sachin for all the hardwork he put in... Btw i think i saw u 2 weeks back on gfr on a sunday morning... Ur bike is very easily recognizable with the golden alloys n dat loud ass exhaust 😂

[@abhinavbhatt]

Hi Abhishek. Yes, it was important for me to give Sachin a minute to speak at least. These guys are the people who go unnoticed. They toil hard every day for very little. It is just fair that they get their exposure. And yeah, I frequent GFR every other Sunday morning. If not on this bike, then on my other loud ass bike. A Triumph Street Triple 675 with a Project SC GPM 2 exhaust. Next time, wave. I'll stop for a chat. Cheers

[@abhishekrathore2586]

@@abhinavbhatt sure

[@Aaozh]

Does wrapping your bike leave any scratches/cutmarks from the blade?

[@abhinavbhatt]

Not really.

[@Liyingbemo]

i need it too on my r15v2 to cover up scratches, interesting video 👍 keep doing it

[@abhinavbhatt]

Thanks man.

[@revealthetruthchannel]

How did you get the wheels painted gold? Did the colour come stock with the bike?

[@abhinavbhatt]

Hello. No. It only comes with black wheels. I got them painted golden from an automobile painting shop in Delhi's Karol Bagh.

[@devaputrajames4352]

dude how did u get the dashboard (or the inner side of the fairing) carbon fibre'd , i herd that taking out the v3's fairing is quite complicated...

[@abhinavbhatt]

Hi. Similar way I got the rest of the panels wrapped. It is hard work, no doubt.

[@AdarshBenny]

You need more subscribers man.

[@abhinavbhatt]

It's cool. As long as the right audience is watching, numbers don't matter. Cheers

[@utkarshtalwar102]

Also an unrelated question. Should I buy the V3 now or should I wait for the ABS model to come? I stay in goa and it rains here for 4-5 months. I won't be riding while its raining but when I do, the roads will be wet. Please suggest what to do. Its not sure whether the ABS will be single channel or dual.

[@abhinavbhatt]

I would say wait for the ABS model now that it is less than six months away.

[@utkarshtalwar102]

Abhinav Bhatt the wait is killing me 😂

[@abhinavbhatt]

Me too. I really need to sit down and start working on a new video.

[@md.mushrafali1438]

Hi bhai. Just put one review on your bike a close look after wrapping. Compare stock and modified bro.why you are not uploading a new video. Ok tc bhai.

[@abhinavbhatt]

I don't have a stock bike to compare it to. I'll try to shoot a video soon. I generally only do a video when I have something to show. So, nothing new as of now.

[@arindammowar5474]

how you installed those ktm indicators? because r15 v3's indicators are socket system but ktms are bolt system. can you please tell me?

[@abhinavbhatt]

The guy who did it put a little latch. It was fairly cheap too. Rs 10 for one.

[@ronithpr6983]

Bro y don't u put another disk brake in the front...it will look like an actual super bike

[@abhinavbhatt]

Naah. With my braking set up, I wouldn't need it. Also, I don't want to increase weight unnecessarily.

[@alifsatria6069]

in indonedia r15 v3 have usd shock in the front not just ordinary telescopic:v

[@abhinavneoharysvarma8551]

Looks nice, gives the bike the touch from Red and grey that this colour lacked. Show us how the headlight looks after tint

[@abhinavbhatt]

Thanks man. The headlights are pretty much useless after tinting.

[@abhinavneoharysvarma8551]

@@abhinavbhatt ohh, still would love to see it in upcoming videos

[@abhinavbhatt]

Sure. Why not.

[@vamsi8558]

What was the advantage of wrapping to bike? Please tell me in English?

[@abhinavbhatt]

You can personalise the look according to your taste.

[@soumyadutta7705]

I want to install a crash guard on this bike, but there is no space for that! can you make a video on this?🙏

[@abhinavbhatt]

Why don't you install frame sliders? Yamaha sells them for Rs 2500 or so. I have them on my bike.

[@soumyadutta7705]

OK.

[@soumyadutta7705]

Thanks😀

[@sajeerwr]

Dear bro I need Pulser F250 headlight modeling to 3 eye Where I can made custom visor with head light

[@anandurj7921]

If u add a winglet to ur bike... It will lit🔥 and u can also add the mirrors with indicators... It will help to look more premium... Cheers bro

[@abhinavbhatt]

Let's see man. Going to Thailand next week to buy parts. Will check everything out there. Cheers

[@anandurj7921]

Good luck my bro💪

[@abhinavbhatt]

Thanks man :)

[@mrkrabs8112]

Would love to know if the wrap will not come off again over to a especially near the gills?

[@abhinavbhatt]

I think in time it will. What can be done though is to secure it from inside by applying a thin strip of black electrical tape.

[@milindbajracharya4918]

I have been thinking of exchanging my FZ25 for V3 .... do you have any opinion of the performance differences between the two bikes??? thanks

[@abhinavbhatt]

They offer similar levels of straight line performance. The FZ would have better torque, easy riding position, but dynamically, the R15 better overall. I am not sure if it is worth losing money on the FZ to go for the R15. Maybe look at a category higher?

[@DarkhorseXmusic]

I had fz25, now have a V3. The main difference is the riding position. But there are many other differences like looks😃

[@nawangbhutia862]

Hello bro i saw the tank grip installed in your bike, does it help while riding? Please give me some idea from where should i purchase.

[@abhinavbhatt]

Yes, it helps with a bit of traction when you are leaned over and during hard braking. You can find it on Ali Express. Cheers

[@nawangbhutia862]

@@abhinavbhatt thanks bro

[@brunoogordo2966]

How is the brake doing? Did it ever failed on you? I have seen the instalation video , and i want to buy one set , but i am afraid of them to fail as they are not brembo or nissin

[@abhinavbhatt]

The brake is doing phenomenally well. Very good feedback and progressive power. What also helps is my brake pads are a high grade Brembo and I also have Motul brake fluid and a steel braided brake line. And sticky Metzeler M5 tyres. So the combination helps me shed speed with a lot of confidence.

[@brunoogordo2966]

@@abhinavbhatt ok that is fine Just a question , if you need in case to rebuild the piston or to add the rubber seals, where do you buy it? That is my afraid of buying it and then not having the work around of iit But thanks for your answer! :) realy does help me Do you have any friends who have the same master cylinder with feedback? Thanks

[@abhinavbhatt]

Nope. No clue how I will rebuild the piston if I have to. And I don't even think spares will be available since it was bought from AliExpress. I'll probably have to replace than rebuild. And no, nobody else I know has this mod so far.

[@tathagatasarkar8072]

Please put a link for the 3M carbon wrap, from where can we buy this wrap

[@deathstroke.wilson]

Stumbled up on this video half a year too late. Couldn't help but notice he's stretching the vinyl way too much, this results in bad adhesion and the possibility of vinyl shrinking over time. Over excessive use of heat gun doesn't help either. Looks like he only cares about how many wraps he can do in an amount of time. Hence I wrap small parts of my bike myself. C K Wraps, his channel is very informative and I love taking DIY crafts. Good luck.

[@abhinavbhatt]

Sure thing, Sumit. I'll look into it.

[@flippersharma4994]

#Only Person Who Love the bike more than anyone.. #Guruji of #bike

[@abhinavbhatt]

Hahahaha. Not really.

[@sudinsdn3627]

Looks great bro😍

[@abhinavbhatt]

Thanks man :)

[@thejagc3736]

finally u did it what is was asking 👍👍👍✌️✌️

[@abhinavbhatt]

And more shall come, soon. Cheers

[@ganghariyawanderer8950]

Sir plz make a vedio on rear tyre upgrade to 160 0r 180??👍

[@abhinavbhatt]

Sir, no point in it. It is not advisable and I won't be able to make a video on it. Sorry.

[@ganghariyawanderer8950]

@@abhinavbhatt okay thankyou sir.

[@GamesReckoning]

Will the stock r15 hit 150 km/hr with a 93 kg rider? I am asking you this because the showroom dealer is not going to allow to rip the bike on the highway.

[@abhinavbhatt]

Under the right conditions, it might be possible. But remember 150 Will be touch and go. You won't be able to hold that speed for over a couple of seconds. What matters is this bike will hold 130 on the highway.

[@gauthamshinde1490]

Kindly make a video on the modifications done on your bike.

[@abhinavbhatt]

Sure. Will try to.

[@furiousv3252]

Anything about the Headlights? Are they good enough for night rides?

[@abhinavbhatt]

They definitely could be better. Not very confidence inspiring at night. However, my opinion is based on just one ride in the dark. I don't ever ride when it is dark and in fact have my headlights tinted black.

[@thecasualrider2668]

looks so mean now.loved the video, but 2000 is quite expensive IMO here it could have been done in around 800 to 1000 for that work but i live in chandigarh.so maybe its expensive there.

[@abhinavbhatt]

Thanks man. Well, the work was very intricate. All the wrapping on all the black panels. It took him an entire day, so I felt it was worth it. And that's what matters at the end of the day, right :)

[@thecasualrider2668]

yah that's right :D .

[@khowalspace2864]

Try jheel... Waha sasta h,

[@rozariodsouza5955]

Can u make a video on the gold rims tht is quite unique from stock rims that company provides

[@abhinavbhatt]

I didn't shoot a video when I got them painted. So a little difficult to make a video on them.

[@aryansoni4760]

hey man you make great motovlogs but be regular wanna see more of your videos

[@abhinavbhatt]

Hello Aryan. Won't be possible for me to make frequent vlogs. Work keeps me very occupied.

[@aishwarypatel7052]

Maybe glossy carbon wrap will look more amazing

[@abhinavbhatt]

Yeah. I think so.

[@aishwarypatel7052]

@@abhinavbhatt lol you replied very fast😂 Btw sir can you tell me about your macwheels paint cost and process?

[@abhinavbhatt]

Local Karol Bagh market. Rs 2000.

[@Simulation4693]

Sir there is a request from my side if u can make a detailed comparison video of rc200 and the yamaha r15 coz im very confused with both of them and i know u will make a very great video

[@abhinavbhatt]

Hello Shaad. I really want to do that video, but none of my friends have a Pulsar RS200. As soon as I do, I'll try to make a video. In the meanwhile, you can watch Autocar's review comparing both the bikes. It is a good watch and very informative. Cheers

[@Simulation4693]

@@abhinavbhatt sir r15 vs the rc200 not the rs 200 actually i wanted to know that how much the engine is capable to give performance by remapping (of both the bikes) or else just make a video of what will be the performance on r15 v3 by remapping and all the mods

[@jitenbirua1118]

@@abhinavbhatt hey bro, my frnd recently purchased rs200 bs4 2018 red . If u want I can get it arranged for u for a comparison vlog.

[@abhinavbhatt]

Sure man. Why not. Thanks so much.

[@sonamrajoraon3115]

i am considering to buy the yzf r15 v3 but i want 2 kw d mileage.... so can u pls do a mileage test on this motorcycle..... pls do rply

[@abhinavbhatt]

You are in luck. I already have done that test. You can watch it here: kzbin.info/www/bejne/iXSxhqp8atiklbc

[@suhasreddy6333]

Where did you buy the indicators lights?

[@abhinavbhatt]

Local market. These are KTM.

[@sonofsun3418]

Bro. Some questions,, What is clip on handlebar size for this bike? Is your wheel stock?

[@abhinavbhatt]

Think the fork dia is 41 mm so that would be the size of the clip ons too. The wheels are stock but the tyres aren't. Running a 110/70 front and a 150/60 rear. Metzeler M5 H rated tyres. Cheers

[@sonofsun3418]

Very helpful bro. becoz stock front tyre is 90/. Bro I replaced brakeline with pulsar 220 but high speed braking is not great. Tell me your braking spec. Since I didnt even change tyre.

[@abhinavbhatt]

You can refer to my two detailed videos on my braking set up. They are on my channel.

[@utkarshtalwar102]

I think the front blue and black with carbon fibre looked better ☹️

[@abhinavbhatt]

It was nice. But I prefer this :)

[@ravikumarsah7638]

Brother i have a question i want to install good brake pads but not the stock one and i don't want to spend that much as brambo costs something costing less than brambo any recomendations brother ??

[@abhinavbhatt]

I would say don't change the pads. Rather get the Pulsar 220's steel braided brake line. That will make some difference.

[@ravikumarsah7638]

I have to pull the lever very hard to stop the bike even in city while facing some panic situations BTW Love your content 😍 and thank you for your suggestion i will get it install and will give you the feedback as well .

[@abhinavbhatt]

I hope it works out for you. And thank you :)

[@ravikumarsah7638]

Elder brother sorry for making you reply so many time actually i visited about 10 bajaj spare parts shops but no one is ready to sell the steel braided brake lines what should i do now , should i search online ?

[@abhinavbhatt]

That's very strange. Yeah, you can try online. Ideally, they should sell over the counter.

[@shankyrajpandey]

If I use laminating cote is it going to damage my bike color when I remove it please answer me

[@abhinavbhatt]

No. I don't think so.

[@shankyrajpandey]

@@abhinavbhatt first thank you for reply and second thank you for suggestion

[@abhinavbhatt]

Most welcome, Shashank :)

[@yogeshv5786]

Bro in instagram order a bubble windshield and a winglet. It looks cool. Its from autologue design.

[@abhinavbhatt]

I have a double bubble windscreen. I am not sure if I want the winglet though.

[@yogeshv5786]

@@abhinavbhatt why u didn't fit it.

[@nitishshukla450]

Bro what about the led headlamps Its look different What have you done to them?

[@abhinavbhatt]

I have a black film on them. Although it reduces the effectiveness of the lights quite a lot.

[@SuperDonch]

Dude I am new to v3 could plz tell how to ride the bike before first service can i go beyond 6k rpm.... can't wait to zoom my baby

[@abhinavbhatt]

Occasionally you can. But don't take it past 8k rpm for now. And keep varying the rpm. Don't ride it at a steady rpm for prolonged periods of time.

[@SuperDonch]

@@abhinavbhatt o great thanks helpful

[@DCVExpeditions]

Very nice Abhinav.

[@abhinavbhatt]

Thanks, Dinesh :)

[@ClashWithArthur]

Dcv bhai apka naya video kab aa raha he,, i m ur subscriber too

[@DCVExpeditions]

@@ClashWithArthur soon bro

[@Aryanladekar]

Thank you so much bro , this video was needed...

[@abhinavbhatt]

Most welcome, Aryan.

[@ManojKumar-bf2ni]

Sir any kind of headlight update???..stock is not that good on r15s

[@abhinavbhatt]

I know of only Cyclops, but that is very expensive. About 12-13,000 for two bulbs.

[@sheraptsheringlepchasada]

Hi Abhinav I have Recently Noticed that my R15 V3 Vibrates a Lot even when it's in neutral I can feel the Vibration all over the bike if I keep my Palm in Pillion Seat or in the Wind Shield Also I have been having Number Plate Screw Loose Every now and then due to this. Is this Common Or Is it only me with Who is Facing This I Would be really thankful If you can Check your R15 V3 in neutral and Check if its that much Vibrating that would help a lot. Thanks In Advance

[@abhinavbhatt]

Hey man. Sorry to hear this. However, my bike is running just fine on neutral. Next to no vibrations.

[@sheraptsheringlepchasada]

Thank you Brother that's really helpful

[@deepdange2215]

Bro itna cost nahi lagta bro itne se kai 🤣 ham indore se hai hamare yanha full body wrapped ho jata h 3500-4k mai full fairing bike mai mere pass bhi v3 hai bro

[@raghulponnusamy9034]

Hi bro how is the radial master cylinder performing,planning to fix

[@abhinavbhatt]

I haven't ridden this bike in many months now. Can't say.

[@raghulponnusamy9034]

Okay

[@alexbinu5993]

Bro can't you change those regular front forks to the international variant upside-down forks

[@abhinavbhatt]

Too much hardware change involved. But yes, I'm trying to do exactly that. Details soon.

[@alexbinu5993]

Abhinav Bhatt if ur changing your to it..Do a video on it too.......Ur current videos are great,good accent and nice nd neat presentation..Simply admire ur work

[@abhinavbhatt]

Thanks, Alex. Yes, the idea is to document all changes on my bike. Will do a few videos on the change. Cheers

[@aryansoni4760]

Hey dude it's me, interceptor video?

[@abhinavbhatt]

Yet to edit.

[@AjayKumar-gc7kz]

Bro from where you got this done ✅ and will this affect warranty?

[@abhinavbhatt]

No. This is a cosmetic mod. It shouldn't affect the warranty. And all details of where I got it done are in the video and the description. Cheers