Can't believe yours was a sleeved block, because it was performing as good as unsleeved one
@vishwa8640 Жыл бұрын
Sare
@SpeedyLio Жыл бұрын
I know right!
@p.n.Karthik Жыл бұрын
RX lover from Karnataka . Yes! Bro your videos are always informative today I come to know that what is the difference btw sleeved & unsleeved thanks to maxil bhai which he explained perfectly and you have took right decision because imported are not guaranteed unless they are expensive and Indian parts doesn't give good performance and durability I think so and your block is sleeved it performed very well these days not bad I wish your bike get ready soon to rock on roads
@SpeedyLio Жыл бұрын
Glad to hear that
@BrattyBiker Жыл бұрын
Very good stuff! Looks like a good sleeve job. You don't get imported piston for RX100, whatever they say as import, is just some delhi fake because RX100 was not a global product like the 135 & King. So buy a good original Goetze/EML piston, make sure clearance is set right, use the chamber only if you know how to jet it right.
@SpeedyLio Жыл бұрын
yamaha rx100-S is a global product
@BrattyBiker Жыл бұрын
@@SpeedyLio Yes, but difficult to source parts here. Use Indian-made pistons, with the right clearance, it will last a long time without issues.
@irishp4301 Жыл бұрын
i just done sleeve work from Rajesh bhai he is the best person, Amazing experience thanks Rajesh bhai❤️🙏
@babagoats7083 Жыл бұрын
Bhai address do
@LIVE2INSPIRE_2228 ай бұрын
0:48 bhai contact number
@irishp4301 Жыл бұрын
Rd bhai ka explanation is Excellent 🙏
@akshaycjois6676Ай бұрын
Bhai,10k ya 15k me orginal rx 135 5 speed 0.5mm bore milega kya, idhar blore me bahut mehnga he
@pranaykumar3744 Жыл бұрын
I am learning something new with this channel.
@SpeedyLio Жыл бұрын
Glad to hear it!
@shonith91 Жыл бұрын
Damn your sleeve lasted for 10~12 years! What was the total kms run after sleeving? You should try and get in touch with the 1st owner of the bike and ask him where he did the engine work. Try to get the back story of what happened to your bike. This will be very interesting to know.
@SpeedyLio Жыл бұрын
around 40k to 50k I have ridden on in this 10 years
@shonith91 Жыл бұрын
@@SpeedyLioif the sleeve has done 40+k kms then the work done is definitely good no one can doubt that. You should also consider the fact that many so called experts have ridden your bike and they haven't been able to tell if it's stock or not. You should probably find out who did the engine work. In my rx I had found the back story and who the mechanic was. Unfortunately the mechanic had retired. But now I have found a reputed mechanic for engine work planning to give my bike to him. To find good mechanic I asked the lathe guys themselves who they thought was the perfect guy for engine work.
@SpeedyLio Жыл бұрын
@@shonith91 we have this guy in mahim, rajesh repowering works. he is the best in the game and people send him blocks and cranks from all over india.
@shivabharani8091 Жыл бұрын
Hi Very informative video Could you please share details of Mr.Rajesh details, address, contact number etc. Thank you. Keep going
@nikunjarora747810 ай бұрын
You even need an original carburettor for original block. Then that pleasant grunt will be there.
@soumikdeb98365 ай бұрын
Bhai mere paas ek unsleeve japan block piston hain .50 mm wala I want to by
@hihi5305 Жыл бұрын
how we can install 62mm piston in rx135? when i have bore the block the liner of the sleeve is coming out
@JLinfo-dc9ft Жыл бұрын
Video chahe lamba ho but it was very informative.. by the way, My friend has installed new Goetze block set and it hardly work for a year..🤔 Hope you get the best one.. eager to see ur basanti
@SpeedyLio Жыл бұрын
the work which we are doing is full proof!
@dipankarchutia2322 Жыл бұрын
Speedy bhai unsleev piston ko bore kar sakte he ki nahi... Ya sleeve karke hi boring karna padega.... Please reply speedy bhai or any bhai
@pereiraokevin Жыл бұрын
Sleeved doesn't matter if it's installed properly there are problems which arise when sleeve is not installed properly or the sleeve material is not good means it's sub standard
@SpeedyLio Жыл бұрын
exactly!
@thefdlord Жыл бұрын
@@SpeedyLio Sleeved engine blocks can have reduced heat dissipation compared to a solid one-piece casting. Additionally, it increases weight, are less durable, reduces engine longevity and increases oil consumption. It brings down the value of the vehicle. So you cant say it doesn't matter! A good aftermarket alloy sleeve used for performance costs more than an actual bore price.
@omkarsutar2615 Жыл бұрын
Nice video BRO 🤞🏻❤️ Love from kolhapur ⭐🤞🏻🌍 Ride safe ride again ✨⭐🤞🏻❤️ ❤️❤️✌🏻
@SpeedyLio Жыл бұрын
thanks!
@babagoats7083 Жыл бұрын
Bhai unsleeved block rehta toh power wheelie hoti ha 2nd or 3rd gear pe
@AMITCHOUDHARY-uf2me7 ай бұрын
Rx 100 or 135 ke engine Sound sun ke bta skta hu sleave ha ya Unsleaved
@gamer.sma.square9170 Жыл бұрын
Sir put TOPROO RX100 PISTON that is very good I also have TOPROO piston in my RX100 BIG FAN 😍🤩
@SpeedyLio Жыл бұрын
thanks!
@harshalsuryawanshi3034 Жыл бұрын
I purchased .50 @ 14K G-1 block unsleeved
@Anyatra_Alabhya Жыл бұрын
Where did you get it from? Original? Could you share a little more details
@RahulSoni-pi6cm Жыл бұрын
Bhai chotu bhai ki dukan kaha pe hi bhai
@fnaticmsicarn332 Жыл бұрын
Bro tell me my sleeved .50 number ,aap konsa size fix karte hai sir.
@akashshukla3454 Жыл бұрын
Great sir
@GHOST_MJ_GAMING Жыл бұрын
Bro i don't understand anything pls make another video on this topic sorry to say this but love you from Karnataka
@SpeedyLio Жыл бұрын
dont worry you will understand this topic in next video.
@nandeibammarconison85737 ай бұрын
Sir mera rx100 block pe YP-8 likha huwa hain please let me what type of block is this..
@adarshadarsh8888 ай бұрын
What will happen bro when rx100 put e-3 block plz tell me
@Sathish_the_Travller Жыл бұрын
Well seleved kit performance well seleve depons upon the level of selve
@chandujadhav7909 Жыл бұрын
Bhai all over kitna kharcha hoga...piston boaring and crank ka
@TheWess450 Жыл бұрын
Anyone have any idea about i series cylinder kit?? On how it pprrforms?
@madmaxjd7558 Жыл бұрын
Letsss gooo another one ❤🫶🏿
@SpeedyLio Жыл бұрын
thanks!
@arghadeepguchhait1999 Жыл бұрын
Bhai mere 135 me bhi .75 no ka goetze piston ha Acha ha.output abhi tak acha de Raha ha
@kevinsolanki2123 Жыл бұрын
Good information 👍
@SpeedyLio Жыл бұрын
Thanks
@apsarpasha1199 Жыл бұрын
He arranged me one std bore kit for my 135 4 speed
@apsarpasha1199 Жыл бұрын
Check with rx zone he will arrange original used bore std size or 25 or 50 size
@Shriram_767 Жыл бұрын
Price?
@MotoGod4988 Жыл бұрын
@@Shriram_767 contact me I will arrange for you
@MirSalmanAli Жыл бұрын
Bhai old stock goetze ya sam mila toh dalna..new manufacture wale 2020 k baad se hi vo piston k ports company walo ne chota kardia hai.. compare new piston ports with your old piston you will understand
@imperialenforcer2271 Жыл бұрын
grind karke bade karo ports ko agar chote h toh
@mubashirisbackmubashir1726 Жыл бұрын
Bhai mene recently engine rebuild kya hai jisme mere pas g1 block hai unsleeved but wo oversized hogaya yani ki ab uska size 1.25mm hogaya hai aur wohi size ki sam piston main daala bhai problem ye hai ki wo performance bilkul nahi deri me mecanic se bhi baat ki to wo bolte ki sleeved mat karwao nawa block hi kharidlo bhai main confused hu sleeved karwao ya nahi Waiting fpr ur reply!!!!!
@SpeedyLio Жыл бұрын
sleeve kara lo lekin ache jagah se, mumbai me rajesh repowering works hai unke pas aap block bhej sakte hai
@varshakurade8804 Жыл бұрын
Rajesh Bhai ka number bhejo
@nidhinsolomon9596 Жыл бұрын
Hello bro...from Kerala I need to buy new engine kit for my Yamaha RX 135 ...plz guide me how to buy and where to buy....
@AshikAk Жыл бұрын
Try to asking your nearby best mechanic
@shravans4068 Жыл бұрын
Bhai cat exhaust ko open cat kaise kerre ispe ek vid bro koi esssa vid nhi he
@SpeedyLio Жыл бұрын
ok
@umakantmore3446 Жыл бұрын
Nice Video Bhai
@SpeedyLio Жыл бұрын
thanks!
@alart974 Жыл бұрын
Thanks bhai ❤
@gamer.sma.square9170 Жыл бұрын
Sir I am from Bangalore 🥳 big fan
@SpeedyLio Жыл бұрын
thanks!
@chinnuvasanth8508 Жыл бұрын
From tamilnadu... slapping noise in engine any solution and also noise in clutch bell...if we hold clutch cable there is no noise when we release noise will come in
@alrichfonseca2995 Жыл бұрын
In that case either change the clutch bless or get it re busshed however the busshing won’t stay too long as I also had the similar properly and got the busing sorted of the clutch bell but one day I wack opened the throttle and there it was back again the sound
@chinnuvasanth8508 Жыл бұрын
@@alrichfonseca2995 ok
@SpeedyLio Жыл бұрын
change clutch bell, I had similar issue and after changing clutch bell it was solved.
@aadilghaniwale3893 ай бұрын
Bhai meri rx 100 ko sleeve karna hai inka address mil sakta hai
@ashfaqshaikh41 Жыл бұрын
Bro please Street Port Kara do and porting ka video banao koi esa video nai banaya hai
@SpeedyLio Жыл бұрын
ok
@babarking_rx100 Жыл бұрын
can i port sleeved engine??
@itsmahakalsbhakt566011 ай бұрын
How can I contact him
@nasrinbagwan378 Жыл бұрын
Love you from pune❤❤
@SpeedyLio Жыл бұрын
thanks!
@BULLS_ALGO Жыл бұрын
Present sir 😅
@dev_sharma2002 Жыл бұрын
Sleeved maat kerna usse accha oversize piston dalna agar sleeved kiye to unsubscribe kerduga By the way love from nagpur 💕
@SpeedyLio Жыл бұрын
thanks!
@apsarpasha1199 Жыл бұрын
With Art Japan piston
@Shriram_767 Жыл бұрын
Bahi tere engine block ka ports ka images dikha plz (in next video)
@SpeedyLio Жыл бұрын
sure
@Rahulshejwal1818 Жыл бұрын
That is that 😂🔥
@RahulKumar-mq9nj Жыл бұрын
Jo bhi indian piston dalo us piston k port bde krna
@SpeedyLio Жыл бұрын
yess
@hamzamalik2035 Жыл бұрын
Bhaya ek baar apni rx 100 me unsleeve block daldo fir dekhna asli rx 100 ka power
@SpeedyLio Жыл бұрын
ok
@akashdhanwantari4697 Жыл бұрын
Bahi thiland ka dalo 1500 hai Gotez 1300 hai
@akashdhanwantari4697 Жыл бұрын
Thiland ka top pro ka
@maheshthakkar913 Жыл бұрын
Contact us if you require expertise any support technically for your RX100 We are Torque Motors located at Nashik
@SpeedyLio Жыл бұрын
sure
@babagoats7083 Жыл бұрын
Bhai I need a block for rx 100 unsleeved
@gamingpoint9220 Жыл бұрын
Mera pass g2 do hai g4 2 hai aur y1 ek hai
@SpeedyLio Жыл бұрын
nice
@nikhilagarwadekar2695 Жыл бұрын
I have unslived port block of rx100 for sale
@muneebmkittur4196 Жыл бұрын
Contact number
@Anyatra_Alabhya Жыл бұрын
Can you share more details?
@pereiraokevin Жыл бұрын
Search for Ipl piston
@SpeedyLio Жыл бұрын
ok
@pereiraokevin Жыл бұрын
If I'm right Ipl is the oem for royal Enfield (Indian piston limited)
@2stroke397 Жыл бұрын
❤️❤️
@Off_India_goldfish_rx100 Жыл бұрын
Mera bhi block ka Kam Kiya menne abhi
@mr.vidhur47 Жыл бұрын
💖💖💖
@Aquawithme Жыл бұрын
Mere Pass G1 Ka Block Hai
@Scentlover97 Жыл бұрын
Kon bola bhai tereko lathe wale responsibility ni lete Goetze Mahle ka wo Indian brand mein sbse best piston brand hai khass kr Goetze ka power pack series tere waha ni lete rahengey alag si baat hai humlog Sam Tak ka responsibility le skte hai minimum 4-5 ka Goetze toh fir or acha brand hai 👍
@SpeedyLio Жыл бұрын
chill maro dost 😂, I just said what my turner said and tumko aur proof chaiye toh iss video ka comments dekhlo.
@Scentlover97 Жыл бұрын
@@SpeedyLio Goetze piston ₹1200 Boring honing ka rate tera yha ka pta ni bhai approx 1500 mein ho jna kaam
@Scentlover97 Жыл бұрын
@@SpeedyLio sleeved unsleeved pdkne ka tarika bta dera hu fitting engine mein pkkd skta tum stock jo original rx 100 ka silencer hai usme hi jb block sleeved ho jta hai or usme bore kr k chalate ho toh orginal or usme awaaz ka fark rehta awaaz dabta hai sleeved wale mein or original ke sound or beats bahut zyada kadak hota hai or pickup chorna heating issues ye toh sleeves ki quality uski thickness pe depend krta hai
@varshakurade8804 Жыл бұрын
Rajesh repowering works ka number bhejo
@vijayendrahirwe502 Жыл бұрын
If block is sleeved then use only Indian piston eg- GOETS, IPL, MARUTI ETC 🔥👌.
@SpeedyLio Жыл бұрын
yes thats the plan
@LIVE2INSPIRE_222 Жыл бұрын
Mahle ka kesa aata he
@bnftrading8029 Жыл бұрын
Unsleeved mai konsa sahi rahta hai bro please btao
@vijayendrahirwe502 Жыл бұрын
@@bnftrading8029 for RX 100 then ART and TOP PRO piston. are the best. RX 135 and RX king use NPP piston. 👍
@bnftrading8029 Жыл бұрын
Meri bike 10 years se padi huyi thii phir usko last year restore kiya tyre bagera thoda engine ka kaam but average city mai 15 se17 ka de rahi
@Gujaratyamaha Жыл бұрын
I have G.1 0.25...S
@abhishekraibagi1493 Жыл бұрын
Bro don't use sleeved bore
@SpeedyLio Жыл бұрын
it is working fine
@aaveshshaikh9919 Жыл бұрын
Bhai thoda Paisa Gaya to chalta hai
@sangitadethe6488 Жыл бұрын
IPL piston is indian based company which make sleeves for tractor and car. Check for these piston
@SpeedyLio Жыл бұрын
sure
@mdarbaz8532 Жыл бұрын
Hii bro😘
@RandomLifeBOXING Жыл бұрын
Khas farak nhi padta sleeve se bawa... It's not bad always... How to sleeve would matter
@SpeedyLio Жыл бұрын
exactly, sleeve kahase kia thats what matters!
@tinkuojha5106 Жыл бұрын
Popat ho gya bhai sleeve block 🤣
@SpeedyLio Жыл бұрын
sleeve hona galat hai kya, give me reasons public want to know.
@tinkuojha5106 Жыл бұрын
@@SpeedyLio are bhai chill🙄 humko lga tha original block hoga apka or nikla sleeve 😑
@SpeedyLio Жыл бұрын
@@tinkuojha5106 thats what im asking, sleeve koi karta nahi kya?
@tinkuojha5106 Жыл бұрын
@@SpeedyLio are bhai hamare idher up me sleeve bhut ganda lagate h bike bakwaas chalta h Apka ek no. Chalta h isily muje lga nhi tha ki sleeve he