Yamaha SR 250 - Metal Cargo Boxes

Installation of ammo gun metal boxes turned as cargo boxes on a Yamaha SR 250 motorcycle.
The bike its already in a big mod but from start on until finished I'll be posting all the works.
drill: goo.gl/ikYe0Z
Hope you enjoy it, thanks for watching!

[@g-man6333]

You are in the flow now, it comes naturally after years of hard work and learning! Everyone would like to work like this but when they realize that this are 10 000 hrs, years of work skills, grinding, welding, etc... not so many is exited anymore! :) Not to mention design ideas, unique solutions etc... another league completely. Your videos are inspiration to a lot of people so keep up and thank you for sharing! Greetings from Croatia! ❤️

[@haggai3.477]

Exceptionally informed comment. MASTERY of any discipline takes 10,000 hrs or 5 hrs of dedication. Bachelor's - 4 yrs Masters - 5th yr.

[@Talahib92]

I always appreciate videos like this. Pure worksmanship, no bullshit.

[@seffy333]

Awesome build. The speed raised my blood pressure, so I got the bright idea to change the video to 2x faster. As it turn out it didn’t change anything.

[@josharaujo9589]

How does this guy work so fast? he's like the flash!

[@lalnablehector1285]

Finally some motorbike luggage compartments that don't look shit.

[@randyeller8139]

A very cool look! I’m chicken though... would’ve thrown a wet shop rag over the tire while welding. With my luck the hot weld splatter would melt a hole in the sidewall! Great video

[@oscarvitalparra1289]

Hola. Pregunta. Ya no haces vídeos? Ya no he visto videos nuevos. Y la verdad me fascinan tus trabajos

[@metalrattle7357]

I recently had this idea of fitting cartridge boxes in my 100 cc motorcycle without knowing the idea was already executed.

[@lagolemus3769]

Muy buen trabajo amigo. Te felicito y quedo padre tu moto. Una pregunta. Sabes... O alguien me puede informar si a esta moto se le pueden cambiar los rines de rayos. Y ponerle rines de 6-8-10 aspas..? Gracias.?

[@PlayingWithFireOutdoors]

Cool hand skills. I'm waiting on a 2022 TW200, I know I want racks and panniers.

[@joegoesmoto4462]

Are you planning on painting the ammo boxes? Noticed that the text side is out on the left one and not the right.

[@maciejroznicki1631]

Because the text is allways on the one side. So if you have open at you side you have the text at the left side. Allways

[@joegoesmoto4462]

* facepalms * this makes sense haha

[@BMCOmotors]

+Joe Goes Moto yes they'll be black

[@joegoesmoto4462]

nice! Your videos are making me miss my SR250 like crazy.

[@johnfarscape]

BMCO don't do it they look perfect as they are, I do have spent shell casings as nut covers though :)

[@Phantom_Of_Madness]

Esta muy bueno el trabajo solo me perturba un poco que la cajas estén orientadas al mismo lado ambas

[@cambioahoraya613]

aesthetically & functional!

[@rafaelmartins9654]

This is a very nice idea! Good job

[@petarjovanovic290]

You should make a cafe racer build, in episodes. this will get you lots of views :). keep up the good work!

[@philcuore]

ive been following BMCO and if im KZbin ill give u a Medal like yesterday.

[@rudollf28]

Ja ja ja yo hice lo mismo hace 7 años con una motorrad 125cc custom año 2006 el problema que se presento es que en invierno se oxidaron los soportes de las cajas de munición. Pero si quedan muy esteticas

[@neonba]

this shit is crazyyyyyyyyyy!!!!!!!!!!!!! nice work

[@blogusvox]

I think, leather saddle bags would look great.

[@agis3287]

that's my future bike

[@JadusMotorcycleParts]

This was awesome to watch! Nice job guys :)

[@tanxinwei84]

I like your custom rack! Super Nice!!! Great Work!!!

[@egemenozbelli]

Big thanks for this video. How about the vibration? I made the same one with little differences but it's been shaking regardless of road type. I'd like to share some pic, thus i may get some advice form you.

[@ideasymoney]

You are a magician!!! Great jobs, thanks!!! I was actually thinking to do the same on my xt350 but I got the exhaust on the right side. I guess I have to do a bit job to go over hot exhaust!! Any advice? Thanks

[@BMCOmotors]

+JUAN ANTONIO DIEGUEZ PALOMINO thanks for the comment, at first it comes to my mind to add some thermal insulation for your exhaust issue. Cheers!

[@EliasSilva-ud7mi]

Que legal. Bolsas compra pronta. Também VC fez ?

[@jujumars3022]

You are a monster! KEEP UP THE GREAT JOB !!!! 👍👍👍👍👍👏👏👏👏

[@fitnessinfinity]

+BMCO subbed :D this channel is awesome,keep those videos coming man :)

[@sdqsdq6274]

hmmm where's the sub machine gun installed at ?

[@landene8230]

You don't install a SMG

[@SystemBreakdown1987]

Hello, do you know the size of your boxes?? Thanks!

[@1ulele]

Is the seat custom made? It looks shorter for me than others.

[@mymelody127]

không thêm cái bợ dưới đáy hộp mà bắt bên hông thế kia để đồ nặng đi đường sốc xe bị rách thân hộp

[@gkala1]

hi!! where can i find the metal base you istall at the bigining!! Not the sidre but the one behind the seat!! Thank you!!

[@kashbabo6607]

Amazing ❤️❤️❤️

[@PussimuffLP]

your videos are so inspirational! i really wanna restorate an old bike, or convert it into a scrambler... and it helps to learn some tricks to solve difficult bends for mounts etc...

[@joaocarlosfloriano4641]

OBRIGADO BMCO EXCELENTE TRABALHO !ADOREI!!!!!!!-----DEVIA TER TAMBEM VIDEOS DE CUSTOMIZAÇÃO DE CARROS NESSE MODELO DE CAMERA ACELERADA!!!!-----ARRAZOU!!!!!!

[@videotheclips]

That is truly fantastic well done

[@tanacz5505]

What type of ammo are you using.

[@rubenmadrid7335]

you fucking rock that shit dude !

[@Syak_Johan]

mind sharing where you bought the ammo box and bonded foam for custom seats?

[@ThePookosh]

Nice work! Subbed!

[@dovybar]

Ok, now I really want to know how to weld

What kind of welding machine do you use?

[@MsIvicao]

Yea can you tell us what you use for welding?

[@renerodriguez2940]

Nice

[@kuldeepmittapally]

From where could we get these ammo boxes...??

[@oldNavyJZ]

Sporting Goods Stores that sell ammo sell them. Probably Amazon as well.

[@aventuraspernambucanas-vlo4745]

Curto muito seus trabalhos top de mas

[@Nyx-ux5hn]

Se ven bien pero en México no puedes traelo esas cajas de cartuchos así que ni soñarlo

[@tseyuwing4644]

Goods side box!! Where could I buy this cargo box, pls!

[@jorgeluismarulandaguapacha4734]

Buenas noches donde consigo las cajitas verdes gracias

[@Nathan-wf3fr]

This is fantastic sir! Great ideas and craftsmanship. I'm building SR250 as well. Would you mind to share details of your solo seat? I'm trying to find one for my build.

[@BMCOmotors]

+Nate 78 I can make one for you, just drop me a mail for more info, thanks

[@manueleguiluz9286]

enhorabuena estas hecho un artista!! me encantaría q me hicieras el colin de mi moto!!

[@mtnmotoadv]

What kind of metal are you using for the framing?

[@jonathanhudson4623]

I'm gabbing up a set for my buddy's Yamaha bolt that is already close to OD green. The cans I have have been sandblasted and refurbished with no lettering and new rubber seals. If the color is off a bit. I'll just paint them to match. I think the bolt will look awesome with them. My brackets won't be nearly as complicated either. We're all gun guys but he decided to build a custom tactical style bike while the I'm building a blacked out turbo 5.3L 2000 zr2 s10 and a blacked out 87 k5 blazer with a stought stroker 383. I told him if he really wants the tactical look then he should put some knobby tires in it so it can go some what off road. My 87 k5 has a 6" lift with really stiff springs and the hood is up to my shoulders and I'm 6' tall. The k5 is still on 32s because it's still only got 3.73 gears front and rear. The zr2 is factory height which is 3" tall than a 4x4 s10 and has a 4" wider track. It's also got 3.73s but it's on factory size 31x10.5R15 mud tires. They should all look damn good together.

[@nikhilshetty3830]

Where can I find those Metal Boxes???

[@mtnmotoadv]

Military surplus stores, Harbor Freight, Amazon

[@MrCaparica]

The work is very well done, but so much welding deserved bigger boxes, but good work.

[@azuki2757]

I really really respect custom builder or mechanic people. I want to learn how to custom motorcycles.

[@浜松ギョーザ]

こんなのが、ハイウェイで脱落したら・・・。

[@taimamangmotovlog650]

nice video bro, what most best? cbr 250 to become scrambler or cafe racer?

[@randyeller8139]

A very cool look! I’m chicken though... would’ve thrown a wet shop rag over the tire while welding. With my luck the hot weld splatter would melt a hole in the sidewall! Great video!

[@impalaSS65]

This was very relaxing and fullfilling to watch. Despite I hate every trend going on now like cafe, scrambler, tracker (unless XR750 or RS750 converted for street use or something very close to it), I still like bikes and army stuff, so I was intrigued. The value of this video for me is the creative skill in blacksmithing and the smart use of video and sound. I did some blacksmith work, for a few years. No expert but I know enough to recognize someone much better. I know nothing about video technique - but I know I always underestimate the work that goes into a smooth production, those times someone explains how they made their video. Thank you for leaving music out. Thank you for being great at both presentation and also being a true builder. The bike looks well executed. I'd gladly let you work on my bikes for $500/hr with this rate shown here =)

[@xavier.molina]

How bad is the rattling while you ride?

[@daveclair9954]

Too small. Put 20mm cans on mine, much more room.

[@999monkeymonkey]

Amazing videos matey, could you do a ww2 dispatch riders bike replica? I have brought a generic code 125 road bike and want to turn it into a ww2 Replica 😊And would love a video for ideas and tips 😎 I Know I will have to cut the rear frame to get the vintage style though

[@TijmenvandenHeuvel]

I'm a huge noob, but i've never seen these vice adaptors to bend tubes. What are they called, i cant really find any information about them.

[@Momo-rs5ns]

Missing Paint It...

[@Pablolaencina]

Please make and model the tires. very good job with that bike.

[@berndl.5214]

I have a Honda Transalp xl 600 v pd 10. Is it possible to build a cafe Racer ?

[@siddharthsharma9850]

very nicely done! love the color scheme. looks like ur getting ready for warfare. l will replicate ur idea on my Royal Enfield Bullet 350cc.

[@ivanreypascual5354]

Mga paps... Legal po ba ang mga ammo box ikabit sa motorcycle?

[@oscarjimenezgomez1372]

increibles tus videos. Quiero hacerme esta misma modificacion, ya tengo las cajas. ¿Que diametro tienen las barras que empleas y de que material son? Gracias

[@lordena7018]

Me parece que queda impresionante, pero como metas unas llaves o algo que suene ya te digo yo como terminará vuestra sesera. Eso sin contar que las cajas de munición se oxidan en 0,

[@raulhumbertocaballerolivia5304]

Amigo como puedo modificar una Honda Dax 70 tipo modelo choopera, dsd Perú un abrazo y gracias por tus videos que Dios te bendiga siempre.

[@dovybar]

Does anybody know if there is a one general type of welding that is MOSTLY used for working on a motorcycle? And what type of welding is used in this video?

[@impalaSS65]

Mig-welding and Mig-welding. A Mig-welder feed wire from a spool, through the handle. It's actually MAG welding (Metal Active Gas welding). The "active" part is the acitve shielding gas contains a few percent of CO2 mixed with the otherwise inert (non-reactive) Argon gas. The CO2 reduce the molten metal so it doesn't oxidize. The MIG (Metal Inert Gas welding) uses only inert gas that flushes any/most oxygen away - a passive sheilding gas. There are Mig-welders with reductive flux material in the feed wire. Those do not need a sheilding gas. They can be used outside. There are some heavy duty mig welders with both flux inte the wire AND sheilding gas. Don't know why exactly but I used one to weld new teeth on an excavator. It was wonderful to work with. Expensive well-kept welding machines are just that. You can use mig-welding for aluminum, but aluminum craves much more current to melt, so not many spend the money needed on the level of welder required. Most use a TIG-welder for aluminum, stainless and other highly alloyed steels. The TIG is a lot more expensive. If you stick to steel, and do all you welding inside, you will do fine with a pretty cheap Mig-welder.

[@dovybar]

@@impalaSS65 informative. Thank you fpr your effort! Cheers

[@ankushgaikwad9447]

Sir ur the best . Sir I have hero honda cd 100 ss can you please , suggests something for that ,

[@jontheroadagain]

fantastic video

[@igoyzigong]

👍👍👍

[@cobra8789]

Where did you buy the box from??

[@komangvlog5700]

Pls the diameter of the steel box tbx

[@fernandoveloso5528]

Muito, criativo gostei das caixas de metal combinou com o design da moto 👍

[@310smoker]

i just hope you disconnected the battery bro. when welding. lol

[@310smoker]

its cool bro , but since i hit those trails it will just get in the way

[@rafaell-b588]

I thought the same, some one is going to copy and... Well...

[@monkeyzeetube]

beautiful work mate

[@narendraausarkar8256]

what is d cost for modifications to a scrambler from a 150 cc honda cb unicorn

[@TheJoshivin]

Big fan of your work sir.

[@mkdave1955]

Please state diameter of mild steel bar and nuts used, thanks David

[@tourandentertainment6847]

Where get Military ammunition Box

[@STho205]

Just an idea for other viewers. For small street bikes, a pair of quality key lock steel file boxes (office supply) on these brackets work and look better than the 50cal ammo boxes. They also only weigh 4lbs vs 10 or more each and are a bit bigger cargo by length and height. They also look like smaller commercial saddleboxes which nobody makes. Dirt explorers may need the armor of the ammo box, but street bikes just need a nice lockbox. Better than leatherette saddlebags and much easier to clean.

[@MaximeD_Alps]

Was looking for an idea for my 125 dtmx, thanks bro

[@user-wk9wq2fp8o]

Flip them around so you can get in them while on the bike.

[@martijnjonkers2179]

Great chanel! I subbed

[@tapiceriainiguez9125]

No vendes o venden los accesorios que fábricaste para ese trabajo excelente trabajo

[@NiclasArskog]

Where did you buy that fender from??

[@sakshi-ph4zh]

Wher can I get this Cargo Box plz tell mi

[@fishingk268]

Awesome

[@ryupoderoso]

la verdad me suscribo buenas ideas y bien explicado felicidades (Y)

[@Clones2011]

neat

[@franciscoguardado2702]

What brand and size of shock you use?

[@lovedot652]

wow

[@cjelbromas7756]

Question, is it noisy???

[@kkooloo5781]

Well done Mate Good Job

[@miguelatambucho748]

Wow!

[@cesardelangel2609]

Love your videos! Your job is awesome!🤩

[@ghass459]

Q genio el man