Yamaha Tracer 9 accessories - Crash bars mounting / sw-motech

[@EVRider]

Thanks for putting this together and enjoy the ride.

[@venax2]

Thank you!

[@raygao1640]

This accessory is fabulous, thanks for the info and tutorial.

[@RRRRefuelRideRace]

A cool video bro. I got the same bike, but the weather is bad. Still plan to do some videos soon. Ordered also the comfort seats. :) Will see. Got my like.

Thank you very much for this video. Great to see this tutorial.

[@venax2]

Thank you Marko, I´m happy to hear that! ;-)

[@paul.pontus]

Thanks for sharing!) They look so great🙂 I've just ordered mine however need to wait for a few weeks. Ride safe, stay safe!)

[@venax2]

Happy to hear I do what makes sense, Thanks Paul. Take care and ride safe ;-)

[@3hills_moto]

Thanks for the presentation my friend....Personally i installed Yamaha's engine guards but yours also looks pretty good!!! Greetings from Greece!!! 😁

[@venax2]

Hi, I think Yamaha engine guard better protect engine a I have seen, it is perfectly prepared to fix engine protection (from below of engine). Take care, vena-x!

[@3hills_moto]

@@venax2 Maybe you are right..I hope we will not find it out with the wrong way...😂😂😂 Anyway, Thanks again for the video you are doing really good job and I'm looking forward for the next!

[@matpapa7831]

Αδερφε,μετα απο ποσο καιρο ηρθαν ;τα περιμενω απο το Σεπτέμβριο!!!

[@3hills_moto]

@@matpapa7831 φιλε μου τα παρηγγειλα μαζι με τη μηχανη απο την αντιπροσωπεία και ηρθαν μαζι....πριν παραλαβω τη μηχανη τα ειχαν εγκαταστήσει ηδη... By the way...την μηχανη την ειχα παραγγείλει τελη Αυγούστου και μου ειχε ερθει τελος Οκτωβρίου!!

[@matpapa7831]

@@3hills_moto Ευχαριστώ πολυ,ενημερωτικα την μηχανή τη πηρα 1 Σεπτεμβρίου,τα καγκελα τα παρήγγειλα την ημερα παραλαβης αλλα ακομα έρχονται! Καλα χιλιόμετρα να εχεις

[@tuananhduong1708]

I hope that SW willl fix the screw for coming set... i am not sure i can find the replacement screw

[@reguila46]

Nice tutorial. Where can i found the manual whith the torque for the bolts?

[@topshelf6623]

like the color of your Tracer. Don't think we have that color available in North America

[@venax2]

Hi, color names "Tech Camo"

[@victoriousmarck277]

Nice video thank you for sharing

[@dougiequick1]

I am hesitant to add because T9gt is already 50llbs heavier that it's naked sibling with same frame and motor. To just keep adding more and more weight flies against the reason I went to the more agile T9gt to begin with...I imagine some ad these simply to have a nice place to mount auxillary lights idk ....lol but certain brands of crash bars so price people are adding protection FOR the crash bars! Weight insult to injury...another option is just carrying more insurance...I have $500 deductible BTW there is a much cheaper and lighter option which is the frame sliders set that juts out further than motor and fairing panel...I would love to hear from owners that used these and dropped their bike to know how well they saved anything?? The same frame sliders fit both the MT09 and Tracer 9 description is "CNC Frame Sliders Crash Protector for Yamaha MT-09 Tracer 9 2021-2022 MT09 " About $35 US there is also an abrieviated cast set of guards that are more like $90 look really sleek maybe quite lighter than the tubular steel ones like SW Motech but I can't find a review....one downside for some would be if you can't mount auxillary lighting

[@venax2]

I think this crash bars people (like I) buy for better feeling, that bike is protected "just in case of fall". I am happy I do not know how it works (bike did not fall to me). I like design of them and it time I bought, there were no other (except OEM) on market. I use them also for fitting my GoPro on bike, but this is extra purpose :-).

[@Melskeh]

To prevent the engine to move down, you should use a car-jack to move slightly the engine up

[@motoontheweekend]

If the engine moves, would the only issue be that the bolt holes may not be aligned? Or would it drop fully…

[@armando3965]

It probably would give me more confidence if both bars were joined each other in the center/front sure there was a way to avoid interfere with the front tire

[@hhyling8483]

Hello, can I ask both frontal screws have 60 Newton meter torque?, I cant see the right side screw on drawing, thanks for video

[@venax2]

Yes, they both have 60 Nm. I found both sides in service book. I happy to hear my video helps.

[@julienblazy3865]

45 N.m both on manual

[@evandewerf]

Nice Video I still have to wait for my new Tracer .....will be around March 2023 It will be my bike to go to work in the busy Netherlands. I like to add the crash bars from SW like you did....and maybe use the bars to mount extra light. I was wondering: can you remove side panels while the crash bars are still mounted? Or do you have to remove them?......which will be annoying of course

[@venax2]

Hi Emiel, I wish you a lot of fun with your coming Tracer soon! ITo your question, I am not able to answer, because I never put side panels out yet, so sorry, I dont know. Take care, V.

[@RRRRefuelRideRace]

Just got the 2022 model and I am eagerly waiting for the good weather. :) Drop by, you may find it interesting. :)

[@Fernando-xl1rg]

Hello, good vidéo. I have a tracer 9 GT. Fernando from Lyon France 🇨🇵

[@venax2]

Thank you Fernando, take care and greetings from Czech!

[@SergeyVikultsev]

You didn’t need to support the engine, right? Engine won’t fall down? I have the same crash bars, thinking how to install them.

[@venax2]

Yes, I did not support the engine. Just mount left side first and then right one. i did not release engine from both sides at once.

[@KairyuRider]

I have the same bars on my 2020 tracer 900 gt, they are great (not that I’ve gone down😅). Can’t buy the tracer 9 in Japan.

[@venax2]

Why cannot you buy Tracer 9 in Japan? Is not for JPN market?

[@daviderizzuti9397]

Hi! I'm having a terrible time trying to remove the bolt at min 3.53 of your tutorial. It should be removed with a normal 8mm hex socket, no? Well, it just doesn't loose.... Did you have any issues?

[@venax2]

Hi, I assume it is long bolt at 3:56. Yes I think it was normal 8mm hex (please check with manual to be 1000% sure :-)) Due to long socket, there was high torque needed to "release" it. But I remebmber I had to use a bit more "power", but as you see I did it.

[@daviderizzuti9397]

@@venax2 Maybe I was just too afraid to break it! Thank you so much for this video!

[@SergeyVikultsev]

Just installed them. Do you have have the same distance from plastic to crash bars on both sides? In my case right rise has a bit less space than on the left.

[@venax2]

I think they are not 100% simetrical from some ever eason. I saw it on other bikes as well. I believe parts are OK, but not nicely simetrical.

[@SergeyVikultsev]

@@venax2 That's what I noticed as well.

[@giuseppealia8413]

Hi, do you happen to have the manual like the one you see in the video, if you can, I can get it for a fee Thank you

[@sandroprimante404]

it's possibile to put on these crash bar the sw drybag80?

[@venax2]

Hi, this is good question to SW-Motech. I do not own them, so I do not know. Take care, V.

[@oliviersintes1836]

Hello thank for this explanation where I can found the official torque? for tracer 9 gt 2021

[@venax2]

Hi, try to find manual in some Tracer 9 forums/FB...

[@edwigeedwigerdm5530]

Hi, awesome vid, however i didn't see the sw motech model number, can you plz provide?

[@venax2]

There is only one for Tracer 9: Art. No.: SBL.06.921.10000/B

[@paveljordanek6972]

Zdravím Veno. Jakým závitníkem jsi to opravil. Chci si pořídit taky tenhle padací rám. Díky za video. Jinak super motorka mám stejnou 👍

[@venax2]

Ahoj Pavle, chce to jen očko se závitem M10x1.25 (standartní stoupání je 1.5), takže nejlepší je si to půjčit, ať nekupuješ závitový očko kvůli 2cm závitu. Ale možná to už SW-Motech vychytal a šrouby už jsou OK, nejdřív vyzkoušej :-) Díky za pochvalu a můžem se někdy spolu projekt a pokecat. Odkud jsi? Já od Olomouce.

[@paveljordanek6972]

Rád bych měl kolegu na ježdění ale mám to trošku z ruky. Já jsem z Únanova to je 4km od Znojma

[@paveljordanek6972]

Jedině by jsme se museli někdy domluvit až bude počasí na nejakem setkání. To by šlo

[@venax2]

to je v poho, máme cestovní stroje!

[@paveljordanek6972]

@@venax2 to je pravda aspoň se to pořádně zajede mám teprve 1200km. Tak s tím musím pohnout trošku

[@miroslavzemanik4474]

ahoj Veno, Tvoje video je super pre laikov, ako som napríklad aj ja :-); chystám sa na montáž padacích rámov od SW-Motech na môjho Tracera, tak mi to prišlo od Teba celkom vhod; zaujíma ma ale tiež, to čo si avizoval na záver... že pridáš na web aj montáž ochranného plechu od SW Motech.... ktorý mám už pripravený v garáži. Ako sa Ti darí? už si s tým hotový? veľa zdaru, teším sa na ďalšie video. Miroslav

[@venax2]

Ahoj Miro, díky za pochvalu. Video je skoro hotový, ale musím se dokopat a dokončit to. Měj se a ahoj, V.

[@miroslavzemanik4474]

@@venax2 ahoj Vendo, tak Ti prajem kopec sily čo najskôr a v novej sezóne plno krásnych zážitkov. Tvoje videá sú skvelé a rád som si ich pozrel. jízdě zdar! Miroslav

[@dani_low]

Thanks for sharing, however to me it seems the SW-MOTECH cover won't fully protect the engine. 🤔

[@dani_low]

Oh, you just said that in the video

[@venax2]

yes, it seems to me not. It seems it offers some part of protection, especially cooler, plastics, but not side of engine. But I will not try to confirm this :-)

[@gorrdd]

Thanks... but why didn't you give the spec on the correct thread. Everyone watching this will need that information. If you turned the bolt for the correct threading, you know what tool you used... Gord