Yamaha TW-200 Carburetor Disassembly/Cleaning | Starts just like new [Yamaha TW-200 Carburetor Fix]

[@CourtWalsh-zb4by]

Great video and very helpful. After I got into the carb and cleaned it, T-dub cranked immediately.

[@DIYTechnician]

Sweet!! Glad this helped.

[@605pilot]

Those are not philip head screws, they’re JIS (Japanese Industrial Standard) screws and require a JIS screwdriver. The screw heads will have a dot on them to indicate JIS. Using a Philip’s head screwdriver will only strip the heads, ask me how I know that.

[@DIYTechnician]

Thanks for passing that along:)

[@kynaston1474]

Came here to say exactly the same thing. I learned this the hard way on my KLR! Stripped every one of them and had to cut flat head slots in with a Dremel tool! Lol

[@kynaston1474]

Doing this tomorrow. I've got no power on rev. I'm hoping this fixes it. I've done almost everything else.

[@DIYTechnician]

Good luck! Hope it works for you.

[@BrittStrata]

How did you get that pin back in without pulling the carb?

[@DIYTechnician]

Which part in the video are you referring to?

[@RandomMichael]

If you are lucky sometimes a few blasts of air into the fuel inlet will solve problems.

[@DIYTechnician]

Thanks for the tip!!

[@1234567890sunshine]

Will carb cleaner damage the plastic floats as well as the rubber tip on the pin that is attached to the floats?

[@DIYTechnician]

Good question. Based on personal past experience it doesn’t do any major damage that I’ve experienced but I wouldn’t be surprised if there is some level of degradation due to too much exposure

[@DarthSpaceBall]

Great video, thanks for the step by step 🤙🏼

[@DIYTechnician]

Thanks Dom!

[@pault248]

Could spraying carb cleaner up the drain tube do anything productive?

[@DIYTechnician]

My gut feeling is no but it’s always worth a try.

[@goodwrenchserviceplus9567]

Got some strawberries and cream moonshine Cheer's

[@DIYTechnician]

Mmmmm nice! Cheers 🍻!!

[@collinmc90]

thanks for making this. I think my pilot jet is plugged.

[@DIYTechnician]

Of course, I’m very happy this helped. Good luck to you.

[@collinmc90]

@@DIYTechnician Got it working again! Thanks!

[@frankiejamesrail1579]

I just bought a bike with 60miles 2022 and it won’t run when choke is all the way in. Will this fix it or is there a solution?

[@DIYTechnician]

I’d say this COULD fix it. If it runs choked but quits when choke is pushed in, likely a carb problem. I’d try everything g else first before tearing into it. Has it sat for a long time? Is the gas fresh?

[@DIYTechnician]

I always like to exhaust all non invasive efforts first before I start taking things apart. If nothing else works, given it does start and stay running when choked, cojld be a float issue. Hard to diagnose this stuff from a distance without the full picture and all the facts. Check the forums too if you havn’t already

[@Mulepick]

Is there fing construction going on behind you?

[@DIYTechnician]

Haha yeah. Sorry not optimal audio conditions for some of it. Sometimes I just have to get after it!

[@downbytheriver501]

Quiet you. That’s man stuff going on there. 😂