If you try to start your WaveRunner and it only "clicks" when you attempt to start, then your starter relay has gone out. I"ll show you how you can change with just a few tools and 30 minutes of your time!
Пікірлер: 69
@rficalora Жыл бұрын
Really appreciate that you took the time to make this video and share it. I was having the same click and intermittent start. I was searching to see how to get at the starter when I found your video. I was hearing (and feeling) the click, so I assumed the relay was working (I've never seen a relay that would energize (click) when it gets power, but not pass the power to the load device (starter in this case). But, since the relay is easier to get at and less expensive, I decided to try it based on your experience. Sure enough, that fixed it. Thanks again; you saved me a bunch of time, money, and frustration had I replaced the starter and still had the same problem!!
@bdradley1 Жыл бұрын
Glad it worked and I appreciate the kind words. Thx for watching! Dave
@corrielewis53373 ай бұрын
Hey Dave , starter relay just clicks when I press start button . took positive wire off of relay post and connected to battery just to make sure my starter was working and didn’t get anything from it ? good battery , any ideas ?? TIA
@chrisbullock49793 жыл бұрын
Great video. Was able to order part online, follow the steps in the video and cranked first time! Saved me some $$ and wasted time at the shop!
@caryon-4 жыл бұрын
Thanks needed this so much! saved me some money also. Blessings to you and your family.
@bdradley14 жыл бұрын
You are so welcome, glad it helped!
@MrMkeiling2 жыл бұрын
The close ups of the relay and the wiring are very helpful . Thank you for the detailed instructions !
@bdradley12 жыл бұрын
Thank you Michael I appreciate it! Thx for watching!
@aerialdroneworxllc Жыл бұрын
Awesome and informative tutorial! Thank you so much for posting this. After watching, I easily changed out the relay in my waverunner and now back on the water. Thanks again man!
@bdradley1 Жыл бұрын
Great news drone! Glad you're back on the water and thx for sharing! Dave
@michaelpherson5232 Жыл бұрын
Great video. Had no idea what the issue was. Craft went in Memorial weekend. Worked fine. Went to prep for upcoming July 4th and no start, just the click and thump that could be felt. Local dealers booked out 4-5 weeks. Watched video, confirmed symptoms, ordered part with expedited shipping. Just completed install and back in business. There are going to be some happy grandkids in a few days. And me.
@bdradley1 Жыл бұрын
That's great news Michael!!! Glad it helped and I appreciate the update and for watching! Have a great 4th on the lake with family! Dave
@bobborycki85104 жыл бұрын
Feeling the selenoid click in the electrical box was genius.,,,thanks!
@SIMASRBIJA12 жыл бұрын
Well done great video great description same thing i spot on my vx1100 2009 today..i will try in a next few days and will share the impresions..
@jaykern96713 ай бұрын
Thanks for making this video. Exactly what I needed!
@deankaras83592 жыл бұрын
Thank you for saving me 100s of dollars at the shop! Really thank you!
@bdradley12 жыл бұрын
Thank you Dean I appreciate it, glad it helped! Thx for watching! Dave
@JackTRyan2 жыл бұрын
“Do a tool inventory…”. Hell yah. :-)
@liamkneeson88667 ай бұрын
Perfect, thank you!
@dinosittaro40774 жыл бұрын
perfect timing.........need to replace my relay. great video, thank you
@bdradley14 жыл бұрын
Great! Glad it was a help
@danielwarder70623 ай бұрын
Hi there, great video. Did you use genuine Yamaha parts or did you find an aftermarket product you were happy with?
@bdradley13 ай бұрын
Thx, yes I just bought an aftermarket part. Have had no issues at all since then. I appreciate you watching, Dave
@photobugg013 жыл бұрын
This sounds exactly like my problem. I press the start button and click/click. With enough tries it does turn over and start. Does this with a fully charged battery, so I'm going to assume the starter is good and try just replacing this relay first. Thanks for the great video!
@bdradley13 жыл бұрын
I appreciate it and that’s exactly what mine did until it completely stopped cranking
@koszor13372 жыл бұрын
Did this fix yours? Mine does the exact same thing
@kriskrmpotich49802 жыл бұрын
Awesome video buddy. Thank you
@cristiancabello36889 ай бұрын
Hello, thank you very much for your video. I would love if you could help me with the following problem, I have a 2007 Yamaha VX 1100 Sport, in order to start it I must press the start and stop buttons at the same time, if I release the stop button the engine stops.
@ashtonalveari8773 Жыл бұрын
I ordered a new starter relay took the old one out and noticed the push pins were slightly smaller and the nuts for the grounds were gold not silver ?
@tynewcomb4884 Жыл бұрын
Nice job mate👌
@bdradley1 Жыл бұрын
Thx Ty I appreviate it and thanks for watching! Dave
@romeldaroy5 ай бұрын
Hello Sir, have you ever had this issue?My waverunner won't start after running for few minutes. It needs to cool down to get it starting again. Appreciate any input you can share.
@cactusstudiossouth2 жыл бұрын
I have no power at the White connector that plugs into the start stop box White connecter what do you think it could be?
@dominickguerrera1581 Жыл бұрын
My starter turns slow it still starts Could the relay be going bad or is the starer going bad ?
@keatinma3 жыл бұрын
Great video. I have the same setup with 2006's, same colors. One started great in March, won't now (first time trying to take it out last week). I hear the relay clicking and some clicking from the starter. Can I assume it is the starter and go right there? Just want to be able to isolate some more before ordering parts.
@bdradley13 жыл бұрын
Assuming your battery is fully charged and connections are tight...I’d start there first and then move on from there
@shelllythomforde2288 Жыл бұрын
Is it many quiet clicks in a row?
@rodolfolane85473 ай бұрын
Hello I have a 11/10 WaveRunner and it will not start. I press the start button and the dash lights up with the information but no crank. I changed the battery on my remote checked to make sure battery was in correctly but the remote doesn't show if it is off secure. Could the starter relay cause both issues?
@GeorgeGeorge-ri9cd2 ай бұрын
Have you recovered your issue?
@GeorgeGeorge-ri9cd2 ай бұрын
*resolved
@rodolfolane8547Ай бұрын
No still having same issue
@instituteforinspiredlearni79513 жыл бұрын
Replaced my solenoid but still just clicks. Will have to search further.
@brendancharette99433 жыл бұрын
Did you ever figure out the problem? I replaced my starter relay as well and still just clicks...
@backwoods60963 жыл бұрын
Same
@backwoods60963 жыл бұрын
I’m dreading checking grounds
@p1548314 ай бұрын
Has anyone had the same issue on a gp1800? Mine’s a 2019 and showing the same issues. Wondering if there’s a tutorial for gp1800
@ethanmittler36823 жыл бұрын
Have a 2021 jetski I’ve had for 6 months with no issues. I decided to not ride it for about a month and a half and now when I go to start it, it clicks everytime I press the start button. Shouldn’t I just need to replace the battery?
@bdradley13 жыл бұрын
I can't see your entire question but sounds as though you have a weak battery. I would charge it fully and try again before I did anything else.
@ethanmittler36823 жыл бұрын
@@bdradley1 exactly what I’m gonna do. Thanks!
@lahan7863 жыл бұрын
Thanks sir i get
@ricardorodriguez77136 ай бұрын
Thanks
@coledevries50383 жыл бұрын
I need your help! I thought it was my starter relay and I’m still getting nothing. What’s next. Starter? If I hook a battery on it it’s slowly cranking. I can’t figure it out
@bdradley13 жыл бұрын
And that battery is 100% charged with tight non corroded connections?
@coledevries50383 жыл бұрын
Yes. Brand new fully charged
@coledevries50383 жыл бұрын
I tried jumping it off my f-150 to give it some extra juice and it still doesn’t want to crank the way it should. Very slow and weak. I know it has good compression and the motor isn’t locked up by any means. Just doesn’t seem to be getting enough to crank the way it should
@bdradley13 жыл бұрын
That’s odd it turns slow , it could be the starter. The only thing I can think is the brushes inside are worn or corroded and it’s not making good contact? Strictly a guess and pretty hard to diagnose without seeing. Hope that helps
@stephenrobinson34012 жыл бұрын
Sir, where did you purchase this part? Thanks!
@bdradley12 жыл бұрын
I ordered off line, I actually think it was Amazon.
@michaelbentley77173 жыл бұрын
I have a 2012 Waverunner. When I press the ignition the starter attempts to kick on but won't. When I wiggle the ground wire leading to the starter (under the exhaust manifold) it acts like it wants to start but won't. Do you think this is a problem with the wire, the starter, or the starter relay? Thanks!
@bdradley13 жыл бұрын
Not sure exactly what you mean by “acts like it wants to start but won’t”, does that mean it spins over? Sounds like you could have a loose or corroded ground wire.
@michaelbentley77173 жыл бұрын
@@bdradley1 It clicks and spins over for a second or two. Fuel pump kicks on and dash lights up. Sorry for the jargon lol
@bdradley13 жыл бұрын
@@michaelbentley7717 it’s hard to diagnose without seeing unfortunately but it sounds like it’s starter related. Hate to tell you what to do since I can’t see but I’d start with taking starter off and doing some test on a bench with a battery and some wires and see if she spins over. If it works off the ski then you can eliminate that. Hope that helps
@michaelbentley77173 жыл бұрын
@@bdradley1 ended up figuring out that when I crossed the starter relay, the waverunner would turn on just fine. Thinking the relay was bad, I replaced it but it still didn't fix the problem. Took it to a boat repair guy (that was a mistake) and now I'm on a huge waitlist. Now I'm thinking it could've been the ignition button. Will update lol
@closeenoughmechanics2 жыл бұрын
@@michaelbentley7717 any update as to what was the problem? I have a similar problem. I’ve worked my issue to either an improperly programmed security remote that is causing my ski to stay in a “locked” mode. Or a bad safety kill switch. I can manually ground them black wire of the starting solenoid and everything works fine. I don’t know what implications hardwiring that black wire to the starting solenoid will have. I will ensure the safety kill switch and the stop button works appropriately from a safety standpoint. I have the wiring diagram, but it’s not the most intuitive diagram in the world.
@tomhenkel84704 жыл бұрын
Pretty Good!!!
@filipdagarp45034 жыл бұрын
What if issue persist?
@bdradley14 жыл бұрын
You will have to get a multimeter and start with checking wires. You could have a shorted wire or bad ground that is causing the same symptoms