Yamaha XSR155 Handlebar Riser Installed

If you need one, get one! Significant change in riding posture!

[@julioceazarhortilano6184]

boss hindi kana nagpalit ng clutch cable? pagkabit ng riser ng xsr?

[@DJDLS]

re-route lang ng clutch cable

[@benjiecabrera8402]

Hello paps ask lang motowolf kasi yung inorder ko pag kabit po ba ng riser mo sakto lang yung mga cable wala kaba pinalitan don kasi ako nagwowory salamat paps rs always❤️🤙

[@DJDLS]

reroute lang ng cables bro para mas lumarga ng konti. stock cables pa rin yan. pero di maiiwasan magkaron ng konting batak pag sagad ang liko.

[@brux9553]

I'm 5"8' and I ride up straight with the stock. I think it's just your riding position.

[@DJDLS]

My arms are short 😂

[@noahpamaya]

May ibang modifications sa bike bukod sa riser? Nasubukan mo nang mag-angkas, anong comment nila? Thanks bro

[@DJDLS]

Side mirrors lang at radiator guard. Tabas upuan din pala. Di ako nag aangkas paps ✌️

[@jimjim1828]

Boss pano mga cable..nahihirapan aq ngayun..di ko malagay ng maayos...ganyan dn binili q..ang hirap ikabit ng handlebar..

[@DJDLS]

Nagpalit mga mas mahahabang allen bolts yung nag install paps. Yung clutch cable i-reroute mo din. Merong nagpost ng cable reroute sa mga fb pages ng xsr155 👍

[@MOJOJOJOSALIGUMBA]

Pashare naman ng link ng riser for XSR boss. Palpak yung nabili ko na motowolf, di pala pwede hehe

[@DJDLS]

Wala na yung link bro. Comment ka sa channel ni capt. Jc rage may nabili sya na mas ok.

[@ikeyzee6340]

nagchange rin ba kayo ng mga cable na mas mahaba sir? brake, clutch, odo spedo?

[@DJDLS]

No. Stock cables lahat. Rerouted lang yung iba.

[@markcalibara8297]

relax

[@PNEUSBNS]

ilang mm ang itinaas??

[@DJDLS]

Not sure pero nakatulong. Lalo na nung nagpalit din ako ng fat bar. Pero wala na yang xsr ko nabenta na.

[@ultimatefix12]

Hello Sir!pagkabit ng riser wala bang pinalit na cable?

[@DJDLS]

Wala naman. Nagreroute lang ako ng clutch cable.

[@ultimatefix12]

@@DJDLS Tnx sa info Sir

[@hasselblad5661]

Sir San k nka bili ng handle bar riser pra s xsr 155? Tnks

[@DJDLS]

nasa video mismo paps -- shopee kzbin.info/www/bejne/rpzXhq2Bh5d1hck

[@DJDLS]

shopee.ph/product/284699055/4643204524?smtt=0.62069181-1613376283.9

[@julioceazarhortilano6184]

anong brand ng riser ang kinabit?

[@DJDLS]

generic lang pero i think may motowolf na ganyan.

[@robertkristopergina4607]

Bro, okay naman yung quality nung riser na installed until now? Nagpaplano din kasi ako mag maglagay sa unit ko. Salamat.

[@DJDLS]

yes bro, nakalimutan ko na nga na nakakabit sya eh :)

[@robertkristopergina4607]

Thank you. Kudos!

[@hasselblad5661]

Sir ano size ng riser n installed mo? And San nkkaorder? Pwd pki share Ng link. Tnks sir

[@finethinker]

Possible bang ma void ang warranty pag nagpakabit ng riser sir ? Naka pag ask ka na ba sa yamaha service ctr.?

[@DJDLS]

Nakita na sa casa yung riser di naman sinita. Ang specific lang na sinabi is yung lowering kit will void warranty kaya di ko na kinabit yung Nabili ko.

[@ManCannotRide]

Scrambler riding position, nice.

[@DJDLS]

Yes age appropriate for me hahaha

[@skinz1979]

@@DJDLS ano size sir 22mm or 28mm

[@bar9639]

sir, the line isenough long ?

[@DJDLS]

if you reroute the clutch cable it will be enough.

[@inkeehidalgo5039]

Hey man where did you get the risers? I need one myself!

[@DJDLS]

Shopee 😁

[@lbwc1702]

Can share the link ?

[@huntsmansterling4295]

What did you buy? Model number? Make?

[@DJDLS]

link here: shopee.ph/product/284699055/4643204524?smtt=0.62069181-1613376283.9

[@seanrivaille6944]

sir on installation of the riser, walang kinapos na cable?

[@DJDLS]

re-route lang bro. ok naman so far.

[@DJDLS]

ngayon palit na ko ng fat bar na mas mataas, tinanggal ko na yung riser, no need na. same pa rin ang cables.

[@seanrivaille6944]

@@DJDLS di na rin ako nag riser paps. pero nakabili na ko. inadjust ko lang yung stock bar patingala. swabe na.

[@DJDLS]

@@seanrivaille6944 ah better yan bro. maiksi kasi arms ko saka matanda na mabilis mangawit ang likod :)

[@seanrivaille6944]

@@DJDLS oww. pero yung stockseat tlga ang tigas. pinapalitan mo po yung sayo?

[@jeramelbarcelo1075]

Wala ako prob jan sa handle bars sir 😅. Gusto ko pa nga gawing clip ons eh. 🤣. Sakin lang, pwet ko sumasakit kapag nasa 200kms na byahe. Haha

[@DJDLS]

sa edad ko paps hindi na kaya, mabilis mangawit eh, sasabayan pa nga ng matigas na upuan haha baka padagdag ako ng foam siguro :)

[@jeramelbarcelo1075]

Try mo ung upuan na galing din yamaha. Ung pang cafe racer. Tingin ko medyo malambot un

[@DJDLS]

@@jeramelbarcelo1075 yung parang solo seater? tinanong ko si SK yung nagbebenta ng OEM, medyo matigas din daw...

[@DJDLS]

@@jeramelbarcelo1075 btw waiting ako for more videos from your channel paps! :)

[@juliusbarcelo9481]

Sir yug dating nakakabit ba pinalitan or pinatong lang yun para tumaas tnx,sana masagot

[@DJDLS]

Ipinatong yung riser sa lower half nung stock paps 👍

[@nathoi]

sana may link ka sa item na to sir

[@DJDLS]

Dead link na sa shopee bro, hindi ma-share 😐

[@nathoi]

@@DJDLS thank you bro.problema ko rin ito kasi 5'7" ako at masakit sa likod ko kung long travel.

[@nathoi]

@@DJDLS bro di ba mahirap sa paghanap ng cable nito?kasi may nakita akong vlog ni bikerbrods na gumamit ng cable extension kasi wala pang cable na match available.

[@DJDLS]

@@nathoi bumili rin ako nung bro, di ko naman nagamit. may konting squeak lang pag sagad sa kanan pero working naman lahat. btw nabenta ko na xsr155 ko.

[@DJDLS]

@@nathoi laking ginhawa ng riser bro.

[@geraldg6542]

What's your height dj?

[@DJDLS]

5' 5 1/2"" bro

[@nadimacmud7528]

Di ba nabitin ang mga cable sir

[@DJDLS]

Sakto lang naman

[@emmysignin]

Does it improve the cornering radius

[@DJDLS]

It's more for the seating position.

[@maddybharani3421]

What's your height? Is it comfortable for 5' 4

[@DJDLS]

I'm 5' 5 1/2'' and I need to tip toe to reach the ground. I got used to the height in a couple of days as the bike is light and easy to handle.

[@maddybharani3421]

@@DJDLS yeah, even i also think that i can manage because of less weight.... Anyway YAMAHA is just playing a game with us on Indian roads😂 lets hope to wait for this baby boy😐

[@DJDLS]

@@maddybharani3421 it will come brother, we only had it here for 6 months 😁

[@maddybharani3421]

@@DJDLS Bro here it crossing nearly 1.3 years😂😂 but they brought back the mt 15 .... And having some more doubt bro ... Can we use it as a tourer. Is the riding posture comfortable to Cruise and what about the vibration level on 95 to 105 kmph

[@DJDLS]

@@maddybharani3421 my highest speed so far with this bike is 114 kph, yes there is vibration as you are at high rpms. In terms of comfort, the seat could be softer and for the posture, I had to install a handlebar riser. I have a video of this also, do check it out 😊 I've read some members from our local xsr group doing long rides and they say that the bike can do it with no issues at all 👍

[@revitram]

sir! pa send link naman nung shopee store na pinag bilhan mo ng riser hehe Thanks!

[@DJDLS]

shopee.ph/product/284699055/4643204524?smtt=0.62069181-1613376283.9 Yan paps 😊

[@ash0279]

@@DJDLS thank you for the link...I feel you on this, buti nakita ko vid mo sir

[@DJDLS]

@@ash0279 no problem paps!

[@juliusbarcelo9481]

Sir pwede po papicture ng pagkakabit or pagkagawa ng handle bar nyo tnx

[@DJDLS]

@@juliusbarcelo9481 andito paps kzbin.info/www/bejne/rpzXhq2Bh5d1hck

[@rickyrolls6460]

Yung installation pa nmn inaabangan ko

[@DJDLS]

Sorry di ko nakunan, medyo hectic dun sa shop paps. Pero straightforward lang naman 😊

[@skinz1979]

@@DJDLS ano size ng handle bar sir 22mm or 28mm?

[@DJDLS]

@@skinz1979 22mm bro

[@mrgjr8758]

Mukhang di maingat yung mekaniko nyong nagkabit ng riser may mga gasgas, sayang ganda pa nman ng xsr

[@DJDLS]

Meron nga mga dings dun sa riser. Ok lang lesson learned. 👍

[@dualdtupaz7580]

Kamusta naman sir ung wires and cables nya? Hindi nman ba nabatak? How about during full turns? ,and mawala kaya yung warranty nya? Salamat sa pag tugon sir

[@DJDLS]

@@dualdtupaz7580 may konti pang slack naman but almost sagad na. Clutch cable napalit yung ibang nag lagay ng similar riser, eto pag full turn sa right medyo batak. This is a risk I'm taking for the sake of comfort in riding but sana won't lead to a void warranty. 😊

[@dualdtupaz7580]

@@DJDLS thanks sa pag sagot sir, naliwanagan na ko.