Yamaha XSR700 A quick video on the installation of EVO TECH Tail Tidy. How to install a tail tidy , fender eliminator.
Пікірлер: 80
@TheSarcasmO834 жыл бұрын
Thanks for the great video, gave me the confidence to do this myself. Installed the tail tidy today and it looks a hundred times better.
@StudioReesau4 жыл бұрын
TheSarcasmO83 Good one buddy. Glad it helped you. 👍👍
@rogerkay86034 жыл бұрын
Great video mate, thanks for sharing, my tail tidy comes next week, super helpful.
@StudioReesau4 жыл бұрын
Cheers mate. You are going to love it. 👍
@secocuenca18704 жыл бұрын
Hi Roger! Where did you buy it? It’s out of stock everywhere and I can’t find it.
@rogerkay86034 жыл бұрын
@@secocuenca1870 5 Ways Motorcycles on eBay
@StudioReesau4 жыл бұрын
Seco Cuenca Hi, I bought it straight from the supplier. Online. Have you tried them?
@rogerkay86034 жыл бұрын
@@StudioReesau Yes, I rang Evotech and they said they'll have more stock next week, 06/07/20 and I'd also advise going direct. Fitted mine yesterday, along with Vintech tail light, thanks again for your vid.
@adrianstevens25915 жыл бұрын
Thanks for making this movie. Made fitting the tail tidy nice and simple. 😎
@StudioReesau5 жыл бұрын
Adrian Stevens i am glad it helped you.
@feemoheat8 жыл бұрын
love the customisations and even the tank!
@StudioReesau8 жыл бұрын
FeeM oHeat Cheers buddy...
@shakinsherlock667 жыл бұрын
So much better. Good work fella
@Skuglyft4 жыл бұрын
Looks amazing! will get it for my XSR :D thanks for the video as well so it will be easy to follow installation
@eleventeenmedia8 жыл бұрын
Awesome. i've been looking at getting the same tail tidy!
@StudioReesau8 жыл бұрын
Terence Soet Its a great part and very simple to install.
@eleventeenmedia8 жыл бұрын
The only thing that's stopping me is the fact that I'm considering making my XSR700 into a single seater (shortening the frame too), and maaayyyybbbeee installing one of those mudguard wheel number plate holders.
@StudioReesau8 жыл бұрын
Terence Soet Sounds great. XSR looks super with the single seat and short tail.
@eleventeenmedia7 жыл бұрын
Finally installed the same fender eliminator. So happy with it! :) I did move the indicators to the other spot compared to yours though.. Overall, it was an easy installation. Thanks for the recommendation.
@cezaryter66633 ай бұрын
Old fender was sealing battery and cables from dust mud and water splashed from rear wheel. Wisualy much nicer
@tomnow12466 жыл бұрын
Good job ! Perfect to install evotech support
@BaigUzair7 жыл бұрын
that looks amazing man! I've got the 900 here in the states i think I'm gonna put the same tail tidy
@atrack1236 жыл бұрын
Nice work. After fitting this tail tidy, do you have any issues with water spray back from the rear wheel in the rain?
@StudioReesau6 жыл бұрын
T. echnologist Hi, no not at all. The number plate takes care of that. But splashes or sprays on my passenger
@atrack1236 жыл бұрын
Thanks for the response man. Appreciated.
@JonnyBgood417 жыл бұрын
Great video. Thanks very much.
@f.i.l.d.e.p.s2 жыл бұрын
how does the tail tidy prevent splashes getting in to the internal battery? is the undertray that comes with it enough to do thr job?
@arvelarve19776 жыл бұрын
Just got my hands on a second hand xsr 700. It had the side luggage rack and a sidebag from Yamaha mounted. Do you know if this tail tidy will work with the rack and bag? Love your exhaust btw, but seems too expensive. Was it hard to get the db killer out?
@StudioReesau6 жыл бұрын
Arve Gundersen hiya, thanks for the comment. Yes you can have the sidebag and rack fitted with this tail tidy. You see, the tail tidy has two provisional fitting holes, one lets you have the rack with blinkers fitter right back or the other way. Very simple and it comes with the instructions. Re the exhaust, the dealer took the db killer out for me and he did say it was pretty easy, hence he didnt charge anything extra.
@mattballam6 жыл бұрын
Have you tried putting your toolbag between the light and the wheel? If you're going to put it at the front, I reckon that would look ace. Nice bike though! I'm joining the xsr700 club very soon :D
@StudioReesau6 жыл бұрын
mattballam Hi, yes I have tried putting the bag under the headlight and it does look nice. Makes it look even more muscular. Go for the XSR700 pal and you would not look back. Good luck.
@mattballam6 жыл бұрын
StudioReesau I've placed my order and it arrives in 2 weeks. Can't wait!
@StudioReesau6 жыл бұрын
mattballam you are going to like it. Keep me posted.
@mattballam6 жыл бұрын
StudioReesau will do. Got some goodies coming on it too, some freebies from yamaha. Managed to get the toolbag off them without paying their ridiculous price. And some other stuff. Are you on the XSR forum?
@studioreesaubeauty86458 жыл бұрын
Nice one.... 👌👌👌
@KarlKine6 жыл бұрын
Hi! I’m getting my xsr in a month. Do you know if there is the same distance between the 2 turn signals before and after? Evotech couldn’t answer and here in France this distance has to be the same... Thank you for the great video btw. I can’t wait to ride this bike! :)
@Jackanackanorie8 жыл бұрын
Nice mod! I'd be bit careful about showing numberplate though.
@StudioReesau8 жыл бұрын
XJR1300 Rider Cheers buddy. I shall take care in future...
@Drzee19688 жыл бұрын
Great video, looks really good although looks like it might need a slightly small number plate? I'm tempted to do the same, love the exhaust as well
@StudioReesau8 жыл бұрын
Drzee1968 cheers mate. I will be getting a smaller number plate.
@mattballam6 жыл бұрын
At 8:00 why do the bolt heads not match? You use a different Allen key for each of the two bolts
@StudioReesau6 жыл бұрын
mattballam cheers for pointing out. Yes they were two different heads. Don’t know the reason why.
@PetjeWinner5 жыл бұрын
10:50 There it is!
@gushernandez65635 жыл бұрын
Where is that seat from?? Looking for something like this for my XSR900. Thank you!
@StudioReesau5 жыл бұрын
Gus Hernandez that comes as standard with the silver xsr700
@gushernandez65635 жыл бұрын
Oh wow okay lol I wasn't aware of that. Never looked into the 700 versions. Thank you for the reply tho!
@GoWILDization4 жыл бұрын
Nice bike. Looking at getting that akrapovic exhaust you have there but I can't seem to find where to buy it. My dealship said it's only for the 900. Where did you get yours?
@StudioReesau4 жыл бұрын
GoWILD Hi, i got mine from Woking Yamaha. I had to call 7 dealers to get the right answer. Just ask your local dealer to call Yamaha head office and get the part number. They do it for xsr700..
@GoWILDization4 жыл бұрын
@@StudioReesau oh nice. I live about 30 minutes from woking. I tried the place closer to me and they said they didn't do them so I'll try again! How much did you get it for?
@StudioReesau4 жыл бұрын
GoWILD I got mine back in 2016 for around £700 ish
@GoWILDization4 жыл бұрын
@@StudioReesau okay thanks. They may of discontinued it. But we'll see I guess
@ikso195 жыл бұрын
Nice video! It is possible to install with a non factory blinkers?
@StudioReesau5 жыл бұрын
Oscar Jimenez Gallego hi, I don’t see a reason why not as bilnker’s fitting should be same as the oem’s
@74joed6 жыл бұрын
Nice!
@LifeWithPino6 жыл бұрын
Can i install aftermarket indicators with m8 bolt on this or i need adapters?
@OnTheRoadWithFlo8 жыл бұрын
can i put this on my xsr if i have a single seat ?
@StudioReesau8 жыл бұрын
OnTheRoadWithFlo . I am sure you can. However, I would still say that you talk to EVO tech before you order as they would know the right answer.
@OnTheRoadWithFlo8 жыл бұрын
Ok thanks :) nice video btw :)
@StudioReesau8 жыл бұрын
OnTheRoadWithFlo . Cheers mate. I am glad you liked the video. Good luck.
@ballamoto5 жыл бұрын
You look as if you have never disconnected a plug before 😂 Only kidding!
@StudioReesau5 жыл бұрын
Matt Ballam truat me mate I havent 🤣🤣
@ballamoto5 жыл бұрын
@@StudioReesau haha! Thanks for the video anyway, just got mine in the post so I'll be fitting it this weekend!
@StudioReesau5 жыл бұрын
Matt Ballam good luck fella. You are going to love it. 👍👍
@ballamoto5 жыл бұрын
@@StudioReesau thanks! Waiting on my full Ohlins kit now, that's what I'm most excited for!
@MartuscielloG7 жыл бұрын
Hi, Can you please explain me which cable you used for the Plate led light? You did not cut the old one?
@StudioReesau7 жыл бұрын
Giovanni Martusciello Hi there, i used the same cable which came out of the old light (straight forward). No cutting needed.
@aterol42677 жыл бұрын
Where did you get that yellow front light?
@StudioReesau7 жыл бұрын
Arturo Terol García Hey there, its the same light however wrapped in yellow film. Check my prv video on mods for how I had it done.
@SlingingLead5 жыл бұрын
How many more motorcycles would manufacturers sell if they eliminated these ugly tails or included a suitable replacement?
@StudioReesau5 жыл бұрын
Slinging Lead absolutely. People like me who aren’t handy enough might just give up on the idea of modding the bike hence not even bother buying it. Totally transformed the look.
@rogervallve73754 жыл бұрын
I like the original. I am putting fender extensions too
@christopher23274 жыл бұрын
@@rogervallve7375 you are literally the only one, putting a yoshimura fender elimintator on mine, can't wait to get that giant ugly piece of plastic off...
@f.i.l.d.e.p.s2 жыл бұрын
@@christopher2327 the xsr700 original tail doesnt look that bad. there are far more ugly motorcycle tails out there. people only seemed prejudiced even before getting an xsr700 since everyone is just replacing them.
@diego93T44 жыл бұрын
Can you said me where can i buy this tail?
@shanuization5 жыл бұрын
Where did you buy the exhaust?
@StudioReesau5 жыл бұрын
Shahzad Ahmed Khan it was straight from the dealer
@DJ-jp6xc6 жыл бұрын
Evotech quality is really bad. My tail cracked already several times and I lost the number plate 2 times. It is not strong enough to hold the weight and vibrations. A waste of money
@StudioReesau6 жыл бұрын
D J my number plate does come off from one side however no problem with the tail though. Yes the quality is defo not at par as per oems.
@Judgeshred8811 ай бұрын
The music is awful. The video is too snappy and not clear what part is what