Yamaha YC Series Keyboard Engines A and B Layers and Splits.

#yamaha #YC61 #YC73 #YC88 #stagekeyboard
Heh guys, It's Steve from Featherlight and in this video, we're going to take a quick look at the 2 KEYBOARD ENGINES of the brand new YC Series from Yamaha and check out the Split/Layer and effects of this powerful keyboard.
This is an excerpt taken from the full length review of the YC Series Keyboards...
Click on the link below to watch the complete review of the YC Series:
• YAMAHA YC61 REVIEW. Th...
-----------------------------------------------------------------------------------------------------
A Safe and Happy New Year and Thank You to all you guys!!
As a thank you...here is a -10% off coupon to Waves Plugins for the New Year!!
www.waves.com/r/xswcng
---------------------------------------------------------------------------------------------------
Visit me on Patreon: / featherlightstudio
If you feel like buying me a cup of coffee:
www.paypal.com/paypalme/feath...
THIS IS NOT A SPONSORED VIDEO
All gear is purchased with our own money and all opinions are our own.
------------------------------------------------------------
Gear used in my video reviews:
Yamaha YC61 Stage Keyboard
amzn.to/3xEaECc
Yamaha YC73 Stage Keyboard
amzn.to/3eQxE8m
Yamaha YC88 Stage Keyboard
amzn.to/3eW2dcS
Gear Used to make this video:
Coda Music MB-Stealth mic preamp
amzn.to/3rlX9FO
amzn.to/32S7O1k
Nikon z6ii w/24-70 f4 lens
amzn.to/3eVmX4o
Samyang AF 14mm f2.8 lens
amzn.to/3qRrjiv
DJI Pocket 2 Creator Combo
amzn.to/3mYgji6
Freewell Glow Mist Filter Set
amzn.to/3JIvw0C
Neewer Pro 660 50w RGB LED Light
amzn.to/3zxbukT
amzn.to/3pXMOip
Neewer 2 pack stainless steel light stands
amzn.to/3t8rGrw
GVM 2 pack RGB LED lighting kit w stands
amzn.to/3zvqD6v
Neewer LED Bi-Color 18in 70w Flapjack Light
amzn.to/3sWM5jv
FEELWORLD T7 7 inch 4K Camera Monitor
amzn.to/3mXBv7O
NICEYRIG NATO Handle with rail
amzn.to/34qUWQf
SMALLRIG Z Series Camera Cage
amzn.to/3mVw61a
Fotga Swing Away Matte Box
amzn.to/3sXHhKv
SupFoto V Mount Battery Power Plate
amzn.to/32KrwMA
REYTRIC 154 Wh V Mount Battery
amzn.to/3ESlCG9
Rode Wireless Go
amzn.to/3JKhsDB
amzn.to/3G0ITHh
Shure SM7b Microphone
amzn.to/3HIdc61
Mackie ProFXv3 10 Channel Mixer
amzn.to/3FXXzqz
amzn.to/3G3YXrF
DJI Ronin-SC - Camera Stabilizer
amzn.to/32MBNrA
IK Multimedia Z-Tone DI Box
amzn.to/3E6H9Lg
( Affiliate Links )
Gear purchased through these links provides the channel
a very small percentage at no coast to you and helps us
continue to make these videos.
-----------------------------------------------------------
#Yamaha #YC61, #YC73, #YC88, #keyboardlayers
Contacts
Email: [e-mail]
Website: www.featherlightstudio.com/
Facebook: / featherlight-recording...
Twitter: / stevenmhartwell
Instagram: / featherlightstudio
#Yamaha #YC61 #YC73 #YC88
c.2015-2022
All materials and video are the sole property/copyright of Featherlight Studio and cannot be resold or distributed without the express permission/license of Featherlight Studio.

[@MattGarwood777]

this absolutely saved me - new to the yamaha boards, only ever used roland in the past, but i’m newly hired at my church as the pianist and I was looking specifically for how to split, layer, and adjust controls. nailed it in like 2 minutes of explaining. Thank you 3000!

[@Featherlightstudio]

Heh Thanks Matthew.

[@tiosaintbanks]

Thank you. This is helpful.

[@duketranslucent3rd]

Really helpful video - thanks. Subscribed! Currently weighing this up against the RD-2000.

[@Featherlightstudio]

The RD-2000 is also a great board. I think the difference is in the focus as the RD is really a piano players board and the YC covers a bit more ground as a stage keyboard and the organ sounds and control over them is much better on the YC series.

[@duketranslucent3rd]

@@Featherlightstudio Agree re organ sounds. I guess that's to he expected with a dedicated organ engine. The RD has a ton of synth sounds, though, which is attractive. The problem is the board and its interface are ugly as hell compared to pretty much all competitors (IMO).

[@nahumpena1152]

Excellent, thanks

[@grahamcmusic]

Be good to see please how sounds are stored for future use

[@itsmaistro]

The tone effect knobs for the rotary A/B is clutch because natural the YC has a harshness within the 2k htz range which I use a narrow EQ to tame it

[@Featherlightstudio]

Great suggestion

[@algorithmstudios1311]

Thank you for the excellent YC range explanations. I have just bought the YC88 which is a great live player’s board. Additionally could you demonstrate how to do a firmware update? Thank you.

[@Featherlightstudio]

Great to hear and great suggestion!

[@wesford808]

How does the key action of the wooden keys feel? Trying to decide if I want to upgrade from my s90xs.

[@algorithmstudios1311]

@@wesford808 The key bed is really good if you are after a piano action. You just need to check out all the specs as this is a different beast from your s90xs..

[@Featherlightstudio]

@@wesford808 Compared to my s70xs, the YC88 is much more focused and tighter, very much like playing an actual C7X keybed. My s70xs feels sluggish by comparison. Not sure if the keybed is the same on both the s70xs and the s90xs. The actual weight and balance of the wood keys vs the artificial weight of the plastic weighted keys on the XS feels more natural and responsive to play. The sounds are very well matched to the keybed, the MIDI velocity response/tuning is definitely a step above most other boards I've played including my Moxf8 and the s70xs.

[@wieselt]

Hi Steve. How about MIDI Settings for each part? Is it possible to assign separate MIDI channels to play them from external controllers and set them to “Local Off”?

[@adamandlorraine]

Hi. Can the yc do a split with right hand upper manual organ and left hand lower manual organ? With different drawbar settings for each? I like that setting for a band where I can set the lower to a soft comping tone and upper to a louder lead/stabs.

[@Featherlightstudio]

Yes, you can assign independently each Upper and lower drawbar section relative to your chosen spilt point. And you can include other engines in that mix ( upper on right-lower on left ) or ( upper on left-Keys A on right ) ect, as well as all the external Master zones.

[@andreas1987]

Thanks for a great vid! Does anyone know if it's possible to control volume for both engine A and B at the same time? Tried to use the mod wheel for this, but seems like it can only control one engine at a time..

[@Featherlightstudio]

You can use the Expression pedal to control both Keys A and B engine volume at the same time by going to Settings/Controllers/Receive SW/Expression/Keys A/B but looks like Mod Lever assigns only one controller choice. Love it if some one chimes in here with a workaround for the Mod Lever.

[@andreas1987]

@@Featherlightstudio thanks so much for the answer! Guess it's time I bought myself an expression pedal😉

[@fxdfxd]

Hi. Do you know if it's possible to have organ sound from the internal keyboard + keys sounds from an external midi keyboard at the same time? Thanks!

[@Featherlightstudio]

Absolutely, I go into more detail on that in this video: kzbin.info/www/bejne/h3LMqKhtnc-Vr9E

[@fxdfxd]

@@Featherlightstudio Thanks a lot :)

[@michaelcarter9610]

Having a hard time getting the firmware from my laptop to my usb stick

[@massissousa3250]

Hello, If you can help me because I have the yc-88 and the layers of keys a and b you can, for example, turn on the strings and make a smooth transition, but if you need to make a smooth transition to turn off the b key of the strings, the yc-88 cuts the direct sound. Is there a way to configure this transition to only turn off when I stop stepping on sustain?

[@Featherlightstudio]

Instead of just switching off the hardware sound engine completely, you could assign the strings volume to the Mod lever and use that to bring them in and out. Or just create your next voice without strings, In both cases the sound will fade out seamlessly.

[@thecoastCoverband]

Hi can the YC be used as a sound module in Cubase 12 for example, 16 midi in and 16 midi out so I can have different sounds on multiple tracks? Thank you Gr.Ness

[@Featherlightstudio]

While the YC can certainly be used as a sound module, it is not truly multitimbral, like the Motif series or external sound modules since its focus is on live performance.

[@BennyRamirez]

Hey! So i am having issues with the layering function on my yc. If I try to turn on the Split B nothing happens . The sound library is also not changing . I can only play what’s already set on the live sets. I did try resetting the keyboard back to factory setting but it’s still doing the same thing . Any ideas?

[@Featherlightstudio]

Other than the obvious stuff ( Dirty Pots/Switch, make sure both engines are on and your Keys A/B button is on the right one) I would say check your External Keyboard Control setting. Settings/External Keyboard/Key B and make sure its not set to Ext Only. Other than that, Maybe check with your retailer about warranty options?

[@donstevenson2170]

I want have LH bass and have layered piano and strings in the RH. Is that possible? If so, How?

[@Featherlightstudio]

Choose a Bass sound for Keys engine A and set the Key Range. Choose the 'Layered Piano/Strings" Voice for Keys engine B and set the Key range.

[@donstevenson2170]

@@Featherlightstudio Now I want to control the strings only with a swell pedal, is that possible. And also, can I layer horns or synth while having the bass voice in the left hand...

[@TheJonesy555]

Can you have three splits of internal sounds?

[@Featherlightstudio]

Kind of...You dont have 3 independent onboard split points like a workstation but, the keys A/B engines conform to the global split point. And the Organ engine has 2 parts ( Upper and Lower ) and those parts conform to the split point as well. So you could, for example, have Rhodes (Keys A) and Organ on the lower split point and only a lead synth part (Keys B) on the upper split point. However, the Master Keyboard functions (external keyboard control) are extensive and can have up to 4 independent Zones that can control anything.

[@rustyyates421]

How do you determine the split point? You skipped over that.

[@Featherlightstudio]

Press the Settings button, then Sound/Function/Split Point.

[@peacefulruler1]

2:44

[@rustyyates421]

@peacefulruler1 thank you for responding. I had the yc 73 and sold it because its simply not user friendly. I couldn't find enough videos that explained the things in detail , I wanted to know. I played yamaha for years but finally switched to the roland rd 88 which is very easy to understand and use on the fly and there are many videos demonstrating easy to understand examples of how to use the board.