Don't use a thin bladed kataba saw for this if possible. The few teeth doing the cutting will wear VERY quickly. The example of the chisel used after that in the video is much better because the mass of the chisel can absorb the heat and the edge can be quickly resharpened.
@Grahammon Жыл бұрын
True, but it is just one of many ways shown and gives you alternative ways to make eg if the saw is all you have to hand
@jiijijjijiijiij Жыл бұрын
@@Grahammon Of course sometimes options are limited. People should just be aware that some jig designs are a lot more temporary than others
@007krut Жыл бұрын
8:30-минус глаза. Вызовите врача!! Где мой фрезер!!!
@OCULIAPERI Жыл бұрын
love the process, love the simplicity...wait wait hold up... its a lathe table saw? dang those are some quality dowels
@waynenickoleff9041 Жыл бұрын
Hi Yasuhiro, first and foremost thank you for taking the time to make the video and for sharing your idea/version on how to make the jigs! Most of us will have these kinds of tools in our shops as well scraps of wood, what a simple but effective way to use up the scraps. For me this video came at a good time, I have to make some Black Walnut and Purple and Yellow Heart dowels for some projects I’m working on. Thanks again for sharing, looking forward to your next video 🙏 Take care, Wayne
@philb364 Жыл бұрын
Absolutely brilliant! Jigs for all sizes. Keep up the good work.
@barry.w.christie11 ай бұрын
My favourite type of jigs, simple and easy to make and are extremely useful ... especially liked the last method of creating round tapered legs (or whatever they are used for) ... superb 👍
@shaneintegra9 ай бұрын
This is so awesome. I aint a woodworker but have ran into a bunch of times i needed a certain dowel size that a store didnt have. Now i can easily just make any size.... that is if i remember this trick 🤣
@daveseddon5227 Жыл бұрын
Always impressed by your skill and imagination! 👍🙂
@joaobrandao532410 ай бұрын
Voce é uma dádiva divina para todos que gostam da arte em madeira. Obrigado pelos videos!!!!
@Ham68229 Жыл бұрын
I can understand the use of using a "jigsaw" blade but, a normal saw? What's the risk of over heating the saw blade and ruining said saw? What about using a hacksaw blade instead? I've seen dowels made on a table saw before using a similar jig as what you did with the cordless drill. Love your work and channel. Great video, cheers :)
@Gowood2020-ne6rx3 ай бұрын
It's a good one
@007krut Жыл бұрын
10:00-Диск F.
@Bilal-f5f7w6 ай бұрын
Very nice thanks for sharing keep your good work up thank you
@007krut Жыл бұрын
Токарный станок:🗿🗿🗿🗿🗿🗿🗿🗿🗿
@T0berius Жыл бұрын
Sir, you are the one. Thanks for share with us,you expertise and time.
@kanisohana Жыл бұрын
I found out a way to make round material smaller by rolling it on a table saw surface. You just set the blade height to the amount you want to remove.
@heinrichengelsberg9022 Жыл бұрын
Das war sehr, sehr hilfreich. Vielen Dank dafür. I`m very impressed. 😎 👍👍👍
Наконец-то сделаю себе 3-х метровые черенки для лопаты.
@007krut Жыл бұрын
Шканты*
@Квентин-в2ъ Жыл бұрын
Мало, кто знает устройство точилки для карандашей🤦🏻♂️😬😂
@紙コップ-p6z11 ай бұрын
丸棒が必要なdiyって私はまずないんだけど、これはすごいね。使わなくても知ってるだけでもいい。
@user-xn8mt5sy5o10 ай бұрын
各部位を応力解析してほしいサンプルだと思いました。
@antonioraimundo8548 ай бұрын
Parabéns !! poucos atigem este nível de sofisticação.
@avec9518 Жыл бұрын
👍👍😄
@ramosoficinadamadeira5510 Жыл бұрын
Parabéns muito bom seu trabalho 👏👏👏👏
@timefeatherstorm4 ай бұрын
this is badass you are badass thank you. i especially love the three blade jigsaw blade jig. awesome.
@My_Life_ua Жыл бұрын
Интересно, какой способ лучше всего по качеству и скорости изготовления? 🤔
@YASUHIROTV Жыл бұрын
Рекомендую приспособление с двумя лезвиями для лобзика.
@My_Life_ua Жыл бұрын
@@YASUHIROTV Ооо, искренне благодарю за ответ, буду пробовать! 🤝🏻
@CTACCCC Жыл бұрын
Зачем это делать, если это можно купить очень дешево в магазине? Думаю, что это стоит дешевле электричества и износа инструментов. Это не шпонки, а шканты. Шпонки применяются в слесарке и машиностроении. Шканты применяются в столярке. Вторая половина видео вообще не имеет отношения ни к шпонкам, ни к шкантам. Такие работы выполняются на токарном станке, а не дрелью и обрезками фанеры. Уверен, что качество поверхности деталей при таком способе сильно проигрывает токарному станку. Зачем я этот бред смотрел!?
@Alisar_Shimmer Жыл бұрын
Суета ради суеты)
@chrisdaniel13393 ай бұрын
I had to make a 5/16" Maple dowel and I used the the one blade method clamped to the edge of the board over the 5/16" hole and it worked exactly as shown. Perfect
@Квентин-в2ъ Жыл бұрын
85 способов протянуть элипсоидную, или параллелипипедную рейку через модернизорованные точилки для карандашей🤦🏻♂️ меняй угол захода и будет различная проточка-профиль-диаметр готового цилиндра... Зачем только нужны гладкие циллиндрические нагели(дюбели, анкеры, чепики)???
@E3Ops9 ай бұрын
I love using dowels in my projects. This is great! My dad likes his kreg jig and screws. It works but the ascetics of a dowel is superior to a screw. Thank you, sir.
@jondennertАй бұрын
i think the trick to consistency is to have the piece of timber remain level as it goes through. the drill moves up and down as its pushed forward varying the thicknes slightly perhaps a shelf on either side of the hole will lessen that variance but some very good ideas in there
@СергейЕвстифеев-б8к9 ай бұрын
Через Лерку прогнать нужного диаметра
@Classic-Hedgehog3 ай бұрын
On the first design what blades are used?
@terryt2910 Жыл бұрын
Well. I guess that covers it. Wow! Awesome! Thanks!
@FunDumb Жыл бұрын
It's the kind of techniques in always in need of. The perfect medicine.
@Argentuza6 ай бұрын
This video is pure gold, it deserve a big thank$
@chrisdaniel13393 ай бұрын
Very impressive. You have some impressive techniques
@ShaukatHakim2 ай бұрын
Awesome!!! The best ever video on dowel making.
@SSVkzL11 ай бұрын
Если Ка-50 не закинут на 11.7 я просто ахуею...😢
@kawan-kawanku Жыл бұрын
What type of jig saw blade do you use, friend?
@danielredondo1090 Жыл бұрын
hola .. muy lindo video .. saludos cordial
@daimyo2k Жыл бұрын
I think my mind exploded at about the 5 min mark! =D
@onpu201010 ай бұрын
拍手を送らせてください!👏👏👏 勉強させていただきました!
@SaltyEars1 Жыл бұрын
Немногие знают как поставить дизлайк .... если кому надо - обращвйтесь.
@НиколайИ-ж5ь11 ай бұрын
Hello, what kind of tree do you use?
@francisconascimento2034 Жыл бұрын
Fantástico você é o cara, que Deus abençoe sua carreira, gênio, fico muito contente de saber que você está com tantas ideias sensacional, estou aprendendo com você thank vermat.
@berkahjayafishingberkahjay1663 Жыл бұрын
Sangat menarik 👍
@jondennertАй бұрын
that last machine is awesome, great for furniture legs
@cokhichetao72 Жыл бұрын
hay quá 👍
@MerchantsOfMisery6 ай бұрын
So smart. Thanks for sharing.
@DC9V Жыл бұрын
That's a lot of saw dust. 😅 The dowels look fantastic, though.
@triktutorial Жыл бұрын
mantap gan 👍
10 ай бұрын
How do you keep 90 degree while pushing?
@albertvanwarbeck29434 ай бұрын
😇❤👍
@renatadomagalska36434 ай бұрын
You are Genius. Thank You for sharing!
@gacherumburu995810 ай бұрын
👍👍
@alexandrp4699 Жыл бұрын
Смотри , повторяй и радость труда станет смыслом твоей жизни ! ! !
@jimtroupes6 ай бұрын
Wonderful idea, thank you !
@estrela10287 ай бұрын
monstro
@Liepez Жыл бұрын
TOP!
@RegiPavan11 ай бұрын
Amazing skills 😎😎😎😎
@tricksmp10 Жыл бұрын
very interesting video🎉
@AlanVelascoEscorcia Жыл бұрын
How is that circular blade so thin?
@ななかせ11 ай бұрын
いや、買おうよ。
@Pepe-ry8pm Жыл бұрын
Amazing!!! I like your channel!!!
@МаккашарипАбдулаев Жыл бұрын
Грех не поставить лайк такому видео
@dustinallenphoto Жыл бұрын
This guy is serious about his dowel rods
@aayushsingh54923 ай бұрын
Nice and simplest process
@MarcoToledoCastro4 ай бұрын
Very good.
@matata127 Жыл бұрын
Dopest the saw and drill!!
@emiliowada1016 Жыл бұрын
sugoi!!!!
@myRefuge3710 Жыл бұрын
Thank you man. Your the best.
@andrewkalachev46999 ай бұрын
Будем иметь ввиду, спасибо за идею!
@HalfKaztBoy Жыл бұрын
that is such a fantastic idea!
@yvonnealbano955 Жыл бұрын
10:00
@mike-pm6xn Жыл бұрын
I love the circular saw lathe. Super dope.
@mksahin67 Жыл бұрын
👋👋👋
@hamiltonoliveira3860 Жыл бұрын
❤
@sergueiothonucci1638 Жыл бұрын
🤲
@thomasdietrich6299 Жыл бұрын
Einfach Klasse ,danke 💪👁️
@olegpankrashkin5081 Жыл бұрын
👍👌👏🤜🤛✊💪🤝. Очень классная работа.
@Yevgen6R11 ай бұрын
Thank you!
@DrewJacobson61 Жыл бұрын
Smart guy❤
@jmjm1229 Жыл бұрын
Camera???
@vitaliyg3516 Жыл бұрын
Thanks
@landonlakes4782 Жыл бұрын
Good sounds
@mutantthegreat7963 Жыл бұрын
So cool..
@RichardMerrill3Hawk Жыл бұрын
So inventive! Beautiful...
@товарищСухов-п7ф Жыл бұрын
Not with my Japanese saw, absolutely not.
@836dmar6 ай бұрын
This is a Japan. It’s just a saw.
@aiziajg7349 Жыл бұрын
eskerrik asko!
@agarza6475 Жыл бұрын
Genius...pure genius!!!
@raimundooliveira6096 Жыл бұрын
Criativo parabéns gostei 👍
@candido4677 Жыл бұрын
Que interessante 👏👏😀
@kent.... Жыл бұрын
Наигрался😄👍
@АлександрДемко-ы7ц Жыл бұрын
БЛАГОДАРЮ
@АнтонКриволапов-ь1з Жыл бұрын
People like you save us from angry capitalism😁. Don't stop!
@silverstake889 ай бұрын
This IS Capitalism. Capitalism is an economic system based on private ownership of the means of production and their operation for profit. It includes capital accumulation, competitive markets, price systems, private property, property rights recognition, voluntary exchange, and wage labor.
@mart_ink7 ай бұрын
@@silverstake88bro, chill out.
@Ashi8No8Yubi6 ай бұрын
👍@@silverstake88
@Sun_and_Moon4 ай бұрын
@@silverstake88he said ANGRY capitalism, not Capitalism