Modified stock swing arm from Yerfdog Spiderbox to accommodate Predator 420cc.
Пікірлер: 31
@tariqschmidt14133 жыл бұрын
WOW Someone on YT can actually weld with a flux! I've just watched every pred go kart swap nothing but piss-poor welds so Its refreshing to see! Good work and great design.
@wr300257282 жыл бұрын
Welds look far better than anything factory from Yerf-Dog. Peerless Gear has a series 100 differential that you might consider for a future modification.
@kenneth67313 жыл бұрын
Excellent work!
@scootersonlyrepair67732 жыл бұрын
Im going to make the same thing but for my golf cart but it will have reverse. Perhaps a mass produced conversion for golf carts.
@nikoash47963 жыл бұрын
nice welds
@nicolec72903 жыл бұрын
Nice job
@edwardmojica65345 ай бұрын
How much did you cut off the center cross bar
@user-cc7be8bu2j Жыл бұрын
Just subscribed, your videos are very helpful. Did you use the stock hub mounts? What did you use?
@justinsauer5682 Жыл бұрын
Thanks, these are my rear hubs www.bmikarts.com/White-4-x-4-Wheel-Heavy-Duty-Hub-1-Bore_p_1662.html
@user-cc7be8bu2j Жыл бұрын
Im sorry I meant the axle, what did you use to mount the new bmi axle to the frame. @@justinsauer5682
@justinsauer5682 Жыл бұрын
@@user-cc7be8bu2j www.gopowersports.com/3-hole-1-axle-bearing-kit/. These will attach to the stock locations without a problem as long as you have a one inch axle.
@justinsauer5682 Жыл бұрын
@@user-cc7be8bu2j use lock collars on either side of the bearings www.gopowersports.com/1-axle-split-collar-1-4-keyway/?campaignid=17318042849&adgroupid=&adid=&gclid=CjwKCAjwo9unBhBTEiwAipC11543CDY-GBnB_xNGOF_VKXtDEQj-nHz42yJoerWFsRhtbJrOOEagLRoCJXcQAvD_BwE
@user-cc7be8bu2j Жыл бұрын
awesome, thanks for being super helpful! @@justinsauer5682
@bgmoody3517 Жыл бұрын
Where did you get the axle from? I have a yeti dog 3209 tryna do the same thing with swapping to a predator
@justinsauer5682 Жыл бұрын
BMI karts 1" live axle 45" I think.
@LEISD_Choirs8 ай бұрын
What size sprocket di you use? And can you put the link?
I just bought a yerf dog and would like to know what axle you bought and where did you get it?
@justinsauer56822 жыл бұрын
Bmi karts 45 inch 1inch diameter www.bmikarts.com/1-Steel-Live-Axle_p_517.html
@Yaboi-hk1gk2 жыл бұрын
What rear brake rotor and rotor mount did you use?
@justinsauer56822 жыл бұрын
I used the stock disc and attached it to this. most of the holes aligned up, I had to drill one or two holes in the mounting hub. just make sure the disk is perfectly centered on the hub. you may have rotate the disk to get most of the holes to match up. I use 1/4 inch nuts as spacers all around the center of the disk to keep it centered in the middle of the hub. www.gopowersports.com/1-sprocket-and-drum-mounting-hub/
@dannyavalo3987 Жыл бұрын
I want one.. what is the price
@kainebowen41362 жыл бұрын
What size axle did you get?
@justinsauer56822 жыл бұрын
1 inch diameter 45 inches long. BMI Karts
@kainebowen41362 жыл бұрын
Thanks
@tyriquetaylor13843 жыл бұрын
Why doesn't anyone give them flex or something on the rear it would something new to see