Making scroll saw project for beginners. Cats fretwork segmentation www.etsy.com/shop/AlexFoxUA alexscrollsaw@gmail.com
Пікірлер: 189
@aleksandrmerkulov13225 жыл бұрын
Отличная идея! Очень добрая поделка! :) Клей-88 порадовал ;)) Спасибо за видео, удачи Вам в творчестве!
@AlexFoxScrollsaw5 жыл бұрын
Спасибо за просмотр
@marceladelcortegacandia30376 жыл бұрын
hermoso tu trabajo 😁
@bernhardtmitdt2586 Жыл бұрын
Beautiful idea, thank you for the inspiration
@AlexFoxScrollsaw Жыл бұрын
Thanks for watching
@Stephens8x6Workshop6 жыл бұрын
Very nice Alex ☺
@AlexFoxScrollsaw6 жыл бұрын
Thanks
@AlexFoxScrollsaw6 жыл бұрын
Thanks
@jdmccorful5 жыл бұрын
Well defined Skill level. Thank you.
@AlexFoxScrollsaw5 жыл бұрын
Thanks for watching
@karenoswald80356 жыл бұрын
Well done!
@martinoamello30176 жыл бұрын
Pretty darn nifty.. I have and use a scroll saw, but lack the patience for tight corners and such..
@rouxso51245 жыл бұрын
pretty neat i will have to make one for my son who has a cat
@AlexFoxScrollsaw5 жыл бұрын
Thanks for watching
@edileusalima62006 жыл бұрын
Que lindo seu trabalho parabéns!!amo Gatos 🐾🐾onde vc mora ? Beijos 🐾 🐾🐾🐾🐾🐆
@creatipsuport28195 жыл бұрын
Nice and funny. Love from Indonesia.
@AlexFoxScrollsaw5 жыл бұрын
Thanks for watching
@VasilENKO856 жыл бұрын
*Good job*
@AlexFoxScrollsaw6 жыл бұрын
Thanks
@stanleykrumholz72594 жыл бұрын
Real nice work.
@AlexFoxScrollsaw4 жыл бұрын
Thanks
@PracticalIdeas6 жыл бұрын
Very interesting video :))
@allanmclean66596 жыл бұрын
( Eric Van Zipper) The same way you get to Carnegie Hall : Practice... (Pretty work)
@billbuzwah27056 жыл бұрын
Awesome
@trollmomjo4 жыл бұрын
People learn to read. You don't get the pattern for free you buy it on his Esty. Great job and hope these people learn to read and buy your projects...
@marie-lenaickletroadec24576 жыл бұрын
Très belle réalisation. J'aime le bois. Le seul hic il faut une scie à chamtourner mécanique, que je ne possède pas ! Et faire avec une scie manuelle cela prend beaucoup de temps.
@masha77116 жыл бұрын
Very nice
@xracer19716 жыл бұрын
i loves yin yang's (i also make one in roblox cats life 2,one of them is yin other is yang and the last one yin yang)
@ronidiaz46384 жыл бұрын
Exelent job congrat
@AlexFoxScrollsaw4 жыл бұрын
Thanks
@TheJackBaker6 жыл бұрын
nice work, have you thought about 2 different types of wood, stacked during the scroll saw process?
@jageo484 жыл бұрын
Might work with Degas blades. The issue might be accuracy, as the blade will have a tendency to drift when pushed too hard, too fast or in dense wood, like maple etc.
@bentebrunsvelt3194 жыл бұрын
Super cool and beautyfull
@AlexFoxScrollsaw4 жыл бұрын
Thanks
@JohnColgan.3 жыл бұрын
Very nicely made, love the bevelled edges, gives it bit more depth. Nice thick varnish, what brand/type may I ask?
@AlexFoxScrollsaw3 жыл бұрын
Thanks, I made this project years ago, and I dont remember what brand I used
@alpibrzgaming85734 жыл бұрын
amazing
@AlexFoxScrollsaw4 жыл бұрын
Thanks for watching
@PCenterES6 жыл бұрын
muy buen trabajo, que tipo de papel usas para pegarlo a la madera ¿?
@AlexFoxScrollsaw6 жыл бұрын
Yo uso papel adhesivo "Cristal"
@SgtSweatySac4 жыл бұрын
Amazing and beautiful work. Do you remember what brand and type of blades you were using? Pinned or unpinned?
@AlexFoxScrollsaw4 жыл бұрын
Hi, I use only unpinned blades, I dont remember which exactly I used, but now I use Flying Dutchman ultra reverse blades #1
@daisyishii34384 жыл бұрын
Bello 😍😍👏
@AlexFoxScrollsaw4 жыл бұрын
Thanks
@benidaya72255 жыл бұрын
Nice..can i paste your projects Alex..
@daviddavis6065 Жыл бұрын
I think that's awesome 😊
@AlexFoxScrollsaw Жыл бұрын
Thanks
@bochraguerfali39936 жыл бұрын
very nice work. which scroll saw we use???
@AlexFoxScrollsaw6 жыл бұрын
I use Scroll saw Jet JSS-16
@riversidema7578 Жыл бұрын
мне оченъ понравилсъ, хорошая работа.
@AlexFoxScrollsaw Жыл бұрын
Thank you
@pavlik64 жыл бұрын
Nice work! how did you do the moustache and the nose of the cats?
@AlexFoxScrollsaw4 жыл бұрын
Hi, I cut it the same way as other - I used small drill and blade
@Thepitz20006 жыл бұрын
Nice piece. I am just curios why you chose to paint it, rather than using two different types of wood ?
@AlexFoxScrollsaw6 жыл бұрын
I like using stain + when I was making it I had only birch plywood
@fishtank50506 жыл бұрын
MikeHunt I think that because it was cut from one piece the two parts will fit back together better..
@AlexFoxScrollsaw6 жыл бұрын
fishtank5050, yes it is one more reason for using stain instead two types of wood
@Thepitz20006 жыл бұрын
fishtank5050 Yeah I know about that, its just when using wood that thin ,it is easy to stack cut with two pieces of different colors. Either way is ok, I just prefer not to use stains or paint.
@fishtank50506 жыл бұрын
MikeHunt that's a cool idea. You wouldn't like my work on here I've done with a router..kingfisher, koi carp.ive painted my wood..lol
@gardeningdianne5 жыл бұрын
Very nice. I agree with the earlier comment of using two different coloured woods stacked together. That way you get two for the price of one. One small suggestion, turn your music off in the background when you know you are going to speed up the showing of the process.
@AlexFoxScrollsaw5 жыл бұрын
Thanks for watching
@Darediver100 Жыл бұрын
Mr. Alex, this inlay is really a masterpiece, so delicate and impressive, thanks for your expertise teaching. Just a question, what site did you get this drawing patterns?, I´ll appreciatte your help.
@AlexFoxScrollsaw Жыл бұрын
Thanks, most of patterns at www.etsy.com/shop/AlexFoxUA
@tracymorrison15844 жыл бұрын
very nice ; love the cats. any dog ying-yang ones ?
@AlexFoxScrollsaw4 жыл бұрын
Thanks for watching, unfortunately I don't have such dog pattern
@tracymorrison15844 жыл бұрын
@@AlexFoxScrollsaw i am going to attempt a design tomorrow with roses ; first big challenge as a newby on scroll saw
@daviddinger55376 жыл бұрын
where can i get that patten. love it
@AlexFoxScrollsaw6 жыл бұрын
Write your e-mail, I will send it
@user-qk9qs5eh4w6 жыл бұрын
נהדר אני ממליץ לכל פנסיונר ללמוד את זה
@tome7374 жыл бұрын
Que bonito trabalho, gosto imenso como ficou. É possível eu ter a imagem dos gatos por favor? Obrigada.
@AlexFoxScrollsaw4 жыл бұрын
Obrigado, escreva seu email e eu enviarei
@AlexFoxScrollsaw4 жыл бұрын
Acabou de enviar
@tome7374 жыл бұрын
@@AlexFoxScrollsaw Muito obrigado. Cumprimentos.
@SteveBrecht3 жыл бұрын
Alex, when making these projects, how much is the video sped up by? 2x? Just curious to see how fast you actually cut. I've had a hard time judging my speed while working, both of the saw blade and how I move the wood. Thanks.
@AlexFoxScrollsaw3 жыл бұрын
Usually I speed up by 2x
@Monkey-dg5my3 жыл бұрын
This is very cool. I just subscribed. Im thinking of getting a scroll saw. Any recommendations.
@AlexFoxScrollsaw3 жыл бұрын
Hi, it depends on your budget, I use Pegas 16CE. If you can afford it - do not hesitate, I think it is one of the best scroll saws
@Monkey-dg5my3 жыл бұрын
@@AlexFoxScrollsaw thank you.
@mikegt31585 жыл бұрын
What kind of glue did you use to stick the pattern onto the wood ??
@AlexFoxScrollsaw5 жыл бұрын
I use glue "88" of ukrainian production (instruction: apply glue on both surfaces , wait about 5-10 minutes untill glure dry (recommended, but not necessary), squeeze the glued surfaces), someone wrote that similar glue in USA calls Contact cement
@AlexFoxScrollsaw5 жыл бұрын
Sorry, I thought you asked about glue. For patterns I use self-adhesive paper "Crystal" - it is very comfortabe - you can use usual printer to print pattern
@dallmine4 жыл бұрын
Sorry for commenting on such an old video, but what kind of blade and size did you use here? I just got into scrolling and I'd love to do projects like this, but I think my blade is too thick to really make this work.
@AlexFoxScrollsaw4 жыл бұрын
Hi, almost for all my projects (3-6 mm thickness of wood) I use Flying Dutchman Ultra Reverse blades, #1 allows to make sharp corners and accurate cuts
@dallmine4 жыл бұрын
@@AlexFoxScrollsaw Wow, thanks for the response! What types of wood do you typically use?
@AlexFoxScrollsaw4 жыл бұрын
I use glue "88" of ukrainian production. It is universal glue for wood, plastic, rubber and ceramic. Someone wrote that similar glue in USA calls Contact cement
@lorenelkin94154 жыл бұрын
Have you considered stack cutting with different colored wood? Thanks for this video.
@AlexFoxScrollsaw4 жыл бұрын
I dont make stack cutting
@timtaylorguitarnut5 жыл бұрын
where I this pattern? cant find it on your etsy page.
@AlexFoxScrollsaw5 жыл бұрын
Hi, it is not my pattern, I found this image in the internet, write your email and I will send it
@sandrela777775 жыл бұрын
Hermoso trabajo. Me gustaría poder hacerlo. Sería posible poder compartirme está imágen y la del cats puzzle. . gracias de antemano. 😺
@AlexFoxScrollsaw5 жыл бұрын
just sent
@sandrela777775 жыл бұрын
@@AlexFoxScrollsaw Gracias por compartir tus conocimientos y habilidades por este medio. Muchas bendiciones y éxitos 🙏🙏🙏
@kwazigazu89605 жыл бұрын
Philosophically.
@AlexFoxScrollsaw5 жыл бұрын
Thanks for watching
@sandywinka49786 жыл бұрын
that is awesome! will email a pattern to me
@AlexFoxScrollsaw6 жыл бұрын
write your e-mail
@sandywinka49786 жыл бұрын
Alex Fox sandywinka@gmail.com
@westendfox8967 Жыл бұрын
Thanks for your reply Alex would it be possible to post some to me please your work is wicked mate
@AlexFoxScrollsaw Жыл бұрын
all my patterns at www.etsy.com/shop/AlexFoxUA
@jmtrader26406 жыл бұрын
Ola muito bom como faço para comprar esse projeto dos gatos.OK
@AlexFoxScrollsaw6 жыл бұрын
Escreva seu e-mail e eu o enviarei para você
@joejarrell25784 жыл бұрын
Now what do you do with it? Maybe a coaster ???
@hotsnottatertot54514 жыл бұрын
Glue it on top of a box?
@AlexFoxScrollsaw4 жыл бұрын
You can use it as a trivet
@ceciliareyes98524 жыл бұрын
Un saludo desde Chile como se llama la herramienta con que haces los trabajos , con que los cortas Gracias
@AlexFoxScrollsaw4 жыл бұрын
Thanks for watching, it calls Scroll saw, model - Jet JSS-16
@robertavery88976 жыл бұрын
Why not do two at a time and cover each one with iron on veneer. Just iron on the veneer and save the paint process. Some beautiful veneer out there. Later
@AlexFoxScrollsaw6 жыл бұрын
Interesting idea, thanks
@kevinandmarymoback4537 Жыл бұрын
Alex, Is this design still in your etsy shop as I could not see it
@AlexFoxScrollsaw Жыл бұрын
Hi, write your email and I will send it, or write to me alexscrollsaw@gmail.com
@jessehurst14746 жыл бұрын
Holy ads
@HansZarkovPhD6 жыл бұрын
I can't find this pattern on your website.
@AlexFoxScrollsaw6 жыл бұрын
Hi, write your e-mail and I will send it
@HansZarkovPhD6 жыл бұрын
mbpdcsi@yahoo.com Thanks for your help. My wife will live this. We have 5 cats.
@LadyAmp5 жыл бұрын
Why did you not show the more difficult cuts, the eyes, whiskers, ears. It would have been nice to see how you got the blade in there to cut.
@blue_cameron5 жыл бұрын
Because you don't deserve it
@aaronogorzolka55384 жыл бұрын
you simply drill a very small hole inside the portion you want to remove. Remove your blade from the saw and put it through the drill hole and re-attach to the saw and begin cutting.
@edgarenriquez3584 жыл бұрын
Buenas tardes Tengo varias preguntas 1- ¿que marca de maquina usa? 2- ¿que tipo de sierra es con la que corta? 3- ¿que grosor de triplay recomienda? 4- ¿qué pegamento usa? 5- ¿el papel como se llama para imprimir? Le agradezco mucho su respuesta para proseder a comprarle sus plantillas.
@AlexFoxScrollsaw4 жыл бұрын
In this video I use Jet JSS-16, now I have Pegas 16CE. Blades - Flying Dutchman ultra reverse #1. Wood - birch plywood 4 mm. Glue - calls "88" (ukrainian production, universal glue for wood, rubber, plastic, glass). Paper - self adhesive paper (sticker paper) "Crystal". I hope this informtion wil be usefull for you
@jamesemery72787 ай бұрын
hi where did you get the pattern from please
@AlexFoxScrollsaw7 ай бұрын
hi, write your email and I send it or contact me - alexscrollsaw@gmail.com
@user-rs8xm6ts9c6 жыл бұрын
陰と陽
@andrebelair28122 жыл бұрын
quel est ce papier adessif que vous utiliser? merci
@AlexFoxScrollsaw2 жыл бұрын
Thanks for watching, answered by email
@williamdonnelly87836 жыл бұрын
Hi, Alex, I asked you some 4 months ago if you would send me the pattern for the cats but still not received it yet, thank you.
@AlexFoxScrollsaw6 жыл бұрын
Write your e-mail
@williamdonnelly87836 жыл бұрын
I did give it to you before it is wiljodo22@gmail.com
@belindacooper8822 жыл бұрын
Hi just learning wood work is thus design available please Kind regards Belinda
@AlexFoxScrollsaw2 жыл бұрын
Hello, I made this project long time ago, and I dont have pattern now
@john.ag.g7842Ай бұрын
Que madera es !
@AlexFoxScrollsawАй бұрын
Thanks for watching, for this project I used baltic birch 1/6 inch
@GamAka-fo1mu4 жыл бұрын
Lol this my home work. Me leave in russia
@AlexFoxScrollsaw4 жыл бұрын
Thanks for watching
@cervillla6 жыл бұрын
Hola, me pasarias la imagen?
@AlexFoxScrollsaw6 жыл бұрын
escribe tu correo electrónico y lo enviaré
@cervillla6 жыл бұрын
cervillla@gmail.com
@rodrigoduarte76362 жыл бұрын
Hola igual me puede compartir el plano por favor
@AlexFoxScrollsaw2 жыл бұрын
Hi, write your email and I will send it
@rodrigoduarte76362 жыл бұрын
No me a llegado nada
@rouxso51245 жыл бұрын
can you send the pattern to my email
@aaronogorzolka55384 жыл бұрын
i found it on google image search and used the snipping tool to transfer to word for printing
@pepemartinez45284 жыл бұрын
No indica o muestra como iniciar los recortes internos y como que no se vale, pues así no es enseñanza.
@AlexFoxScrollsaw4 жыл бұрын
No es un video tutorial, pero si tiene alguna pregunta, puede preguntar
@douglasteston77163 жыл бұрын
S
@AlexFoxScrollsaw3 жыл бұрын
Thanks for watching
@dennisg113482 жыл бұрын
Are you OK?
@AlexFoxScrollsaw2 жыл бұрын
Hello, my city (Kherson) is occupied by the Russian military, it is quiet now, but sometimes explosions are heard outside the city, I have stocks of food and essential goods
@dennisg113482 жыл бұрын
@@AlexFoxScrollsaw I hope the madness stops soon. I'll pray for you and All of Ukraine. Stay safe!
@IrinaBagira6 жыл бұрын
cool! come to visit us on the channel . like518
@thierrymaurel17004 жыл бұрын
Vraiment trop long pour un coup de pinceau !
@AlexFoxScrollsaw4 жыл бұрын
Thanks for watching
@jurischkunow68615 жыл бұрын
День добрый. А можно чертёж на jurez76@gmail.com Спасибо
@AlexFoxScrollsaw5 жыл бұрын
Отправил
@claudeelliott39932 жыл бұрын
Way too much time watching you "paint" your projrct!! Right around 13+ minutes out of a a 15+ minute video?? Cute project but come on??
@AlexFoxScrollsaw2 жыл бұрын
Hello, thanks for your opinion. It is my old video, now I make 3-5 min video to show all stages of process and final result.
@claudeelliott39932 жыл бұрын
@@AlexFoxScrollsaw Good idea! I meant no disrespect but felt that you were losing out on good air time! God Bless!