Yongnuo RF - 603N Wireless Trigger (Un-boxing & Review)

[@AvGeekLucky]

Thanks for pointing out frequency switches. Just got a set for my self found this video trying to work out why it wasn't working.

[@OrangeBoxPhoto]

hi yeah the 603N is for Nikon as the cable inside is for Nikon camera's there are version available for cannon as well the transceiver is exactly the same its just the accessories that are different. but for your 60d the C1 is the one you want :)

[@OrangeBoxPhoto]

without knowing your camera setting its hard to advise, but make sure triggers are on and set to the same channel, channel switches are under the batteries, also make sure flash is on manual mode and on TTL mode as these triggers dont support TTL function and ov course make sure your batteries are charged :) and you have a trigger on camera hot shoe and the flash.

[@OrangeBoxPhoto]

thanks, the triggers were not part of the listing, its a special offer i got from the seller as i use same one all the time so i got cheeky and asked for extras if i bought 3 flashes so he threw the triggers in as a sweetener

[@OrangeBoxPhoto]

they are transceiver units so can be used as either

[@jupiterjs031]

thanks your reply. I will try again.

[@OrangeBoxPhoto]

yeah should work fine without issue but no TTL when using these triggers as there non TTL, but then you can use one of the flashes as a comander to trigger or use pop up flash as commander so you will have many options.

[@OrangeBoxPhoto]

you could use those i have no experience with them so i cant so how good they would be thing to bear in mind with those is they are not "transceivers" like the yongnuo ones in this review which means it doesn't matter which you put on your camera or flash, the ones you mention has a specific trans and dedicated receivers worth bearing in mind.

[@BobMarkey]

Can I have the 7D Mark II on a tripod and flash in my hand and fire both simultaneously with one button?

[@qball37]

HI, great video, I just wanted to ask one question; Can you use the remote trigger function at the same time as wirelessly triggering a number of flashes? I am new to using flashes and want to give it a try and these seem a cheap why to start out. Thanks

[@gbweers]

Wonderful video, I assume the "N" on the 603N means that it is for a Nikon. I have a Canon 60D. Is the RF-603 C1 or C3 compatible with my camera?

[@someevil]

I see you put the receiver on the remote flash, I was under the impression that the remote flash has a built in receiver?? Is that the 560 iii only?

[@dsh0877]

great vid keep em coming.

[@jalebaa]

it hase, i have received mine today and it works great :) i think i will buy two more, now i have SB-910 and two Yongnuo YN-565EX and that will work together ? all three together? greetings..

[@OrangeBoxPhoto]

hi thanks, if you look in the box you should have got a release cable see my video : 2min 29sec my camera takes a 10pin however D7000 uses accesory port so you may need to get a different cable there only pocket change to buy but you plus the 2.5mm jack into the yongnuo mounted on your hot shoe then the other end of cable plugs into the accesorie port search ebay for Shutter Release N3 Cable for Yongnuo RF-602 Nikon D90 D3100 D5000 D7000

[@OrangeBoxPhoto]

thanks glad it helped in some way

[@CaseyStanton]

Thanks for the video. I am able to fire my SB-600 from my Nikon D7000 easily with these triggers, but I can't get the button to fire the shutter. Did you have your cam on a special setting?

[@JirkaLottmann]

Hallo, Nice video, but i hlavě oné question: Is it possible use one item as transmiter (on camera) or receiver (with flash)? Or transmitter and receaver is different unit? Thanks for your answer

[@PaceyPimp]

are they compatible where i can mix match and use the same channel on a pocket wizard?

[@OrangeBoxPhoto]

hi thanks, if you look in the box you should have got a release cable see my video : 2min 29sec my camera takes a 10pin however D7000 uses accesory port so you may need to get a different cable there only pocket change to buy but you plus the 2.5mm jack into the yongnuo mounted on your hot shoe then the other end of cable plugs into the accesorie port see this link

[@OrangeBoxPhoto]

yeah i have used 6 of these wiht out issue so you will be fine

[@heryr.8721]

Nice video. i have 2 YN RF 603 with my D200 and YN 560. i'd like to add 1 another speedlight to my system. if i bye 2 another YN 603N, does they work with the system. thanks

[@richardl7570]

They don't have a locking feature on their male end shoe?

[@jalebaa]

Great Video dude ;)

[@Shrishti2689]

Hi i have a canon 550D and 40D and i have the cable compatible with 40D. the triggers work well as remote but when i attach it to youngnuo YN460 speedlite, the speedlite does not fire. I have two of these speedlites and wanted to mount one flash on the camera and another on tripod and make both fire at once. The trigger just does not work in this situation. any idea whats wrong?

[@gilbertovera9650]

Is it possible to awake the remote flash when it goes into a sleep mode? My gear: Nikon D90 and SB 600

[@JoshuaJEnriquez]

Can you please state other brands and models other than Pocketwizards, and YungNuo brands? Cheap alternatives please. State other brands and models that are transceivers

[@projektmetaphor]

Can I use other wireless triggers? Say a JJC JF-T2?

[@lahiruravindran]

does this work with yn 460?

[@2493cookiemonster]

do you find any problem with this transceivers?

[@shero9710]

do these work with yn-568ex speedlite?

[@jupiterjs031]

Hi~ I use D200 and SB-800. Handhold the flash for remote flash trigger sync. shutter is good. But flash is NOT Fire? What's Wrong? Have you test this?

[@OrangeBoxPhoto]

hi yes you will need a shutter release cable to use it as remote shutter release you can get these on ebay like this one ebay.co.uk/itm/Shutter-Release-N3-Cable-for-Yongnuo-RF-602-Nikon-D90-D3100-D5000-D7000-/250971777567?pt=UK_CamerasPhoto_CameraAccessories_CameraFlashUnits_JN&hash=item3a6f156a1f hope that helps

[@richardl7570]

You sure those are double A? They look like triple A.

[@WesleyDugg]

I got myself a set of Commtrig T320's. I think they are brilliant and better then the rf302 or 303s. i did a quick review on my blog over at wezphotography.co.za

[@RPandTHECONGRESS]

crunchy camera lol =)