For the gas pedal, maybe try flipping your floor bracket so it's under and behind the pedal, making the pedal's bottom go closer to the driver's seat? That may make it kick out and down far enough to allow the slot to fit on the end of the bar?
@dwayneevans17842 жыл бұрын
Brent is correct, the bracket needs to get flipped :)
@petenagy2 жыл бұрын
just checked my '78...the gas pedal bracket is indeed flipped; the pedal is bolted to the floor on the backside of the pedal, not the front side as you installed it. The linkage does go through the elongated hole in the pedal.
@WeaselBurrito2 жыл бұрын
Fighting the same internal battle about selling my 87. Have too many, don't drive it much, want to move on to other projects. Your price is a little strong but it is an extremely nice truck. Love how the Hilux is turning out.
@joesobaski19662 жыл бұрын
Can’t wait to see the dash progress. Looking really good!
@austinniemela2 жыл бұрын
Thanks!! Some exciting stuff coming!
@d9daprogrammer2 жыл бұрын
I am a Toyota junkie myself and have built a few lol not on your level though, one thing I can say is, it sucks when you have to sell them :-( even though we build them for the culture, after investing so much energy in them you grow attached. Love the content man, I am way too invested lol keep the content coming.
@mrm41552 жыл бұрын
I’m thinking for the heating controls, you should powder coat the levers too, that might stand out once it’s all done since the rest of the interior has been painted/coated
@timothyadem83542 жыл бұрын
Austin your level of patience is on a another level. I love what you do. I am watching from Kenya, East Africa
@defenderrestoration61142 жыл бұрын
Pia uko hapa ndugu
@timothyadem83542 жыл бұрын
@@defenderrestoration6114 Ningependa venye huyu Jamaal anaweza kuamusha hizi gari mzee. Tunaweza fanya hivi huku nyumbani ndio tuokoe hizi ma-dillar
@catdaddy34072 жыл бұрын
Another great video I watch you all the time since I found your channel but Just a idea instead of a cigarette lighter have you thought about a after market double USB plug for powering electronics and possibly tie it into the stereo just a idea off the top of my head that way it would look more modern !!
@johncourtneyscott27572 жыл бұрын
I have no doubt you will get what you want for that truck
@yonellowernet5984 Жыл бұрын
Why is there a clamp on the parts when powder coating? What is that for? Great channel and videos ! Just found out and subscribed to your channel. We own a Toyota Hilux '94 double cabin with a 2Y carburated engine and a 4 speed gearbox. Greetings from Aruba .
@MZmowing2 жыл бұрын
The linkage does go through the bushing on the pedal
@rossmccredy86222 жыл бұрын
I have a 1974 Hilux and the pedal is pretty similar, not connected to that rod at all. I can send a video if it helps. great videos!
@وطن-ك4ج2 жыл бұрын
You are very creative and wonderful my friend you deserve all the appreciation I follow you from Jordan
@maddtech3482 жыл бұрын
I had no clue what u had into the flat bed truck and estimated it just a touch above what u were thinking especially in today's market. the trucks beautiful and will be gone extremely fast. where I'm from that truck wud be gone that day straight up.
@FlawedOffroad2 жыл бұрын
Id love to have big red, someone is gonna get a killer ride! Good luck with the sale
@austinniemela2 жыл бұрын
Thanks!
@loqal6902 жыл бұрын
Same as my crown, Your supposed to slide it in the hole and then fasten it it at the bottom
@125sm32 жыл бұрын
Fantastic results, loving the dashboard mod.
@austinniemela2 жыл бұрын
Thanks 👍
@H.a.s.a.n.2 жыл бұрын
عمل رائع
@johncourtneyscott27572 жыл бұрын
That Toyota looks great man! I’d love to buy it fro you but, I had a brain bleed and bacterial meningitis in 2019 and now I’m on SSDI so it is not in the cards
@austinniemela2 жыл бұрын
Thanks! Sorry to hear that and I hope for a speedy recovery!
@johncourtneyscott27572 жыл бұрын
@@austinniemela Thank you, it sucks having a license after this happened and not being able to afford one
@AustinLWright2 жыл бұрын
It was a great build series and the truck served its purpose (tons of views and new subs I’m sure). GLWS!
@OctoberGambit2 жыл бұрын
I’d kill to have you rebuild my ‘86 SR5 4x4 M/T. She needs the love so bad.
@richardvargas92242 жыл бұрын
Looking awesome!
@richmueller65772 жыл бұрын
Flip floor bracket 180.
@mrm41552 жыл бұрын
I’m thinking don’t sell it, get rid of the leaf springs and put a 4 link suspension in it, that would be cool! Have you posted the truck for sale on any websites?
@Hanky_Bannist8r2 жыл бұрын
Wow Austin this little truck is going to be super clean everything is turning out really bitchin. I really dig what you did with the HVAC registers !
@عمارالسالمي-ر7ع2 жыл бұрын
انا متشوق للرؤئيت الهيلوكس القديم عندماتكمل
@billhickman48262 жыл бұрын
Need to make some t shirts of the green truck and sale them like you did with the red truck. I would buy one
@dannymcpherson27922 жыл бұрын
I assume the pedal just rests on the linkage and the little cut out on the pedal is just a stop🤷🏼♂️ idk weird
@johncourtneyscott27572 жыл бұрын
A usual, great job
@Paulo-it5gq2 жыл бұрын
Always a bit sad to know big red as to go 🚶♂️ it's such a unique build and it's actually a brand new truck . Love what u did with the Dash , u can aways buy a cup style astray and put a cup holder some where some cars have it like that stock . I really would love to see the dashboard powder coated maybe even in white but black would be the first option, would raptor line like u have in big get be a good idea ? I'm still with the white powder coat dashboard or places or parts of it with white . But there's lots of cool colors to choose but wanna point that there's not many metal dashboards and would look cool if was powder coated .
@austinniemela2 жыл бұрын
Thanks! Yes I think some white in the dash will look sweet!
@sandrolourenco57262 жыл бұрын
For the gas pedal that is totaly normal mine is a 82 and has the same problem just watch out when u are driving it to not pull the pedal too far
@nelsonmarin3012 жыл бұрын
Buena técnica para hornear, me gustan estos videos😀 saludos amigo
@juanruiz46352 жыл бұрын
Porque esa guagua la pones al piso? Bueno debe verse muy bien 👍🏼!
@ghassanalniser3261 Жыл бұрын
Well done I am satisfied with you
@stevegannonhandmade2 жыл бұрын
Which degreaser are you using/did you use on the hard to reach parts of the bumper builds? Looked like it worked better than anything I've been using...
@austinniemela2 жыл бұрын
Simple green HD!
@stevegannonhandmade2 жыл бұрын
@@austinniemela Do you have a link for it so I can help support you?
@austinniemela2 жыл бұрын
@@stevegannonhandmade yeah here it is on Amazon! Thanks!! amzn.to/3b3AKr7
@مالكالأول2 жыл бұрын
👍🏻👍🏻
@josephbecker94352 жыл бұрын
great work, awesome content. rock on
@ExpoltionDesigns2 жыл бұрын
What powder coat gun setup are you using? Looked like it laid out pretty good!
@austinniemela2 жыл бұрын
Link in description! Yes it works great!!
@ExpoltionDesigns2 жыл бұрын
@@austinniemela I don't see the gun in the description, what brand is it?
@austinniemela2 жыл бұрын
@@ExpoltionDesigns oops I missed that sorry! Here it is! amzn.to/3PI9kWA
@michaelsecretan11942 жыл бұрын
Great video! If I had the money I would pickup that red truck! Great work!
@joesobaski19662 жыл бұрын
I wish, I wish, I wish… I’d love to have Big Red!
@_Keir2 жыл бұрын
Before I watch this video, just gotta say I'm super stocked for it. ....clicking play now!
@-B_G-2 жыл бұрын
*Stoked
@paulmartin33402 жыл бұрын
Love your videos on these Toyota pick ups. Another KZbinr is doing up a 1977 Sr5 so maybe you could ask him about the gas pedal... swedemachine is his channell . Cheers from Sydney Australia MATE 🇭🇲👍🦘🇺🇸🦘👍🇭🇲
@timothyadem83542 жыл бұрын
Austin I am not a mechanic but would like to do this as a hobby and may be even a business. How do you manage to do from Mechanical to Electrical to paintings.
@eldonhalliburton47662 жыл бұрын
What Brent said Austin
@Kro_man_tx2 жыл бұрын
I live in Texas. I would have to figure out how to get AC in that truck. 😥
@tylersmith2932 жыл бұрын
Shocked you don’t use a plasma cutter.
@retiredppd2 жыл бұрын
And the claw hammer is back. Lol
@Динаратыншбаева2 жыл бұрын
Nice
@CB-hr6zs2 жыл бұрын
Good video bro. Hate to see big red go but I think everyone understands. And if we all had the money we would buy that truck off of you.
@austinniemela2 жыл бұрын
Thanks man! Yea I don’t want to sell but I really could use the money to fund the next project!
@1993Revhead2 жыл бұрын
I'd sell the green truck first. Always keep your first builds.
@charliebruceortega84472 жыл бұрын
👍
@postelmanshugues51332 жыл бұрын
👍👍👍from France.
@rickyruwawyoch5262 жыл бұрын
Keep the red truck, n sell the one that yhu build..
@ОлександрТаран-ю4ь2 жыл бұрын
Доброго здоров'я привіт з Одеси Україна.
@frediefarmer2 жыл бұрын
👍🏽🇺🇸👍🏽
@edwinmccarthy99692 жыл бұрын
Is he a twin brother to Devin niemela must be
@CCruzr222 жыл бұрын
Please paint the outside of this. Your almost there anyway. You said that you wanted this to be ratty but it is far from ratty now.
@donigor95492 жыл бұрын
Austin, please, check your e-mail fast, I think I have a problem with a person faking to be you chatting with me now.
@austinniemela2 жыл бұрын
Yes there are scams everywhere these days
@مؤيدحراحشه-د4ش2 жыл бұрын
Good...
@giordanolupini38992 жыл бұрын
Keep it up bro loving the vids. If selling the red truck means more builds then I'm all for it!
@mikediamond2572 жыл бұрын
Such an awesome truck. I’d have that in a heartbeat if it was in Australia. Just watching your builds, the quality, time and effort you put into them any of them would be a great addition. WHY this channel isn’t near a million subscribers has me scratching my head.
@Butho_042 жыл бұрын
Another Aussie viewer here ... Just daydreaming what Austin could do to an 80series (my dream "truck")... The quality is above anything I'm yet to see on KZbin... Except maybe the two British guys who've been building the mini for a few years now
@austinniemela2 жыл бұрын
Thanks guys! We will get there someday!!
@zainsajid5952 жыл бұрын
Austin, wouldn't you be using any foam insulation or underlay behind the heater box? wouldn't that help against engine heat?
@RM_Garage2 жыл бұрын
Good luck with selling your pickup. That thing is one of the cleanest out there.
@davidnoel99882 жыл бұрын
Amazing stuff like always bro. Wish I had the money to buy the red truck! Like I said before if you ever sell the green truck I am your guy lol. Love the everything on the new build so far !
@GRAHAMAUS2 жыл бұрын
You really should wear gloves working with those detergents/cleaners/acids/whatever. Even if you think your skin isn't affected, it will do damage that will catch up with you later in life. I speak from long experience, it's just not worth the risk.
@ToolsInAction4u2 жыл бұрын
You deserve more views man! Sharing this channel to all my toyota buddies.
@austinniemela2 жыл бұрын
Thanks man!! 👍
@daviddezeeuw90312 жыл бұрын
Who ever the next owner of big Red is going to be a very lucky guy.. That truck is mint!!
@paulmartin33402 жыл бұрын
Love your videos on these Toyota pick ups. Another KZbinr is doing up a 1977 Sr5 so maybe you could ask him about the gas pedal... swedemachine is his channell . Cheers from Sydney Australia MATE 🇭🇲👍🦘🇺🇸🦘👍🇭🇲
@osmelcarrillo52312 жыл бұрын
Put the throttle linkage in the tube first then mount the bottom down
@stuartschmidt98672 жыл бұрын
if you flipped the bracket 180 degrees around on the bottom of the pedal would it move the bottom of the pedal out/down and put that rod in range?
@austinniemela2 жыл бұрын
I think that is the fix!! Im going to try!
@andresfeliz38412 жыл бұрын
Saludos desde república Dominicana
@steveo77672 жыл бұрын
The gas pedal floats on that rod and hits the cutout on the back of the pedal thats factory.
@jtipp272 жыл бұрын
Floor bracket for the throttle pedal is backwards. On mine the bracket is under the pedal
@mikeypotts47322 жыл бұрын
Seriously amazing man thanks for the video
@the_ure2 жыл бұрын
You mounted the bottom hinge on the pedal backwards
@hanselgretel85632 жыл бұрын
I've noticed that you have your powdercoat oven in your shop and not in the kitchen.😂✌ Best way to avoid argument with the wife.🤣
@eduardonavarro31402 жыл бұрын
With all the amazing painting and powder coating that you’re doing to it, it would be fantastic to see a shiny outside too man, I love how this built is turning out💯✨
@shelter72142 жыл бұрын
Keep it ratty on the outside I say!
@3ttktoni7782 жыл бұрын
maybe the rod was bended cause the pivot was broken
@kayejaye2612 жыл бұрын
Great vid. Impressed by your work and detail.
@cartersmith71632 жыл бұрын
youtube full time mate i wish you luck. today its extremely hard to earn cash of this platform mate sorry, in todays world you ether have to be a gamer or a Hollywood celeb
@christophertownley67342 жыл бұрын
Less talking on your videos bro. Good work, but, less talking
@vista11032 жыл бұрын
Wondering how much you asking for your trucks!
@deoranbell65962 жыл бұрын
I like your fab work its amazing bro keep up the good work🙌
@allenhorne70322 жыл бұрын
Great job Austin, this is really coming together great! It would not surprise me one bit if you decide to go ahead and do a custom paint job, since everything else is gonna be top notch! Keep up the great work!
@ابويزيدالوايلي2 жыл бұрын
عمل شركات متقن
@Dabetus012 жыл бұрын
Good luck on the sale!
@Dabetus012 жыл бұрын
No way tell me more about my taxes owed do you want my ssn to make sure it's actually me.
@robertjordan90752 жыл бұрын
A good radiator shop should be able to build a new heater core for you.
@4runrJay2 жыл бұрын
Maybe the slot in the gas pedal is so a spring can go there that ties to the chassis
@Mnkyc_311 Жыл бұрын
Try a 90' Toyota pickup for the heater core. I can get one for that
@JohnAvantiBK2 жыл бұрын
Turn on the membership and tip option. Your builds are awesome... Leave the radio the way it is and get a slide-out single din radio.
@ryanvick68672 жыл бұрын
you should raffle the truck off
@terrasaid75242 жыл бұрын
what a beautiful work !!!!
@jeremyrudder90092 жыл бұрын
28 miles to the gallon ??!?
@Just_me17762 жыл бұрын
Did you sell this red truck?
@lukankya72202 жыл бұрын
Man...I wish I could be half good as you are! Building Motors...Trains...Car Electrician...Welder...Car Painter...Fabricator...Planner! Everything in one person! Hats off to you
@austinniemela2 жыл бұрын
Hey thank you! All it takes is some google and a bit of patience
@Johnny-Five2 жыл бұрын
Does the truck have A/C?
@jordandunk122 жыл бұрын
Great work!
@ericgoldtooth55912 жыл бұрын
How much
@raymondvelez51732 жыл бұрын
🇵🇷👍😀🧐🤔👍
@mikenone99032 жыл бұрын
Really enjoy your videos. I like them and find them relaxing .... until I think about the time, effort, sweat, etc. you put into every one. Keep up the great work! And I hope whoever buys your truck can pay you for all the work you put into it.