You cannot miss this .. New Product | New Mould | New method

[@ClairesCraftyCorner]

Before the video starts .. the ratio wriiten in screen in the video is wrong. It should say 10:3 not 1:3 🤣🙈

[@Ali-H3444]

Save your dry crumbles in the cups for tarazzo pieces😊

[@shabanakhan5759]

I done this before actually if u take 3 cup powder add 1 cup water slowly.

[@Sahara-Love.]

Hi Claire, never give up to try what it comes into your mind. You never could fail, because it's you. Trust in your creativity and natural instinct. This is the best what you can do. Finally you achieved this fantastic bezel creation....❤

[@roxannlegg750]

I could listen to your ramblings and giggles all day. You have a very cheery voice. I have no interest in resin, but i love watching you do them and hear your explanations and inner voice. So chirpy 🙂. Cheers me up no end.

[@ClairesCraftyCorner]

Ohhhhh thank you so much ❤️❤️❤️❤️

[@elisashue5086]

We all learn from our mistakes. Still turned very pretty. Absolutely love the bevels. They are gorgeous. Thank you. 😊😊

[@CraftybyToni]

Oh wow those bezels are bloody gorgeous 😍😍 and this right here this is one of the reasons I absolutely love your channel most would scrap this video and do it again but no you post it ❤ your so real and honest and I absolutely love that ❤❤ and we are all learning new things all the time no one knows everything about everything 😂 loved it babes

[@carolwalters6469]

I love Resincrete!! I got my pigments from Homeware design right before my car accident last month so I haven't been able to try them yet. I had asked JDiction if they were making a bigger package of the Resincrete and they sent me a message a few weeks ago with the link to the just released bigger pkg! So excited!!

[@vincentferrari]

Resincrete is an amazing substance. I've been working with it since its launch and have been nothing but impressed with it.

[@charlenelesher1198]

So happy to be home. I have a lot of catching up to do. What a happy surprise with the bezzles! Love the way the UV resin brought the resin Crete to life! 🥰

[@colleenbudde2366]

Love that technique ❤beautiful ❤

[@michellesuniqueboutique3405]

Beautiful beautiful beautiful! Love them all but THOSE BEZELS!!!!!!! Thanks for sharing Claire. Take care

[@SkitchBean_aka_Christine_E]

Claire, I am so glad you had a chance to use ResinCrete. I love this product so much. I have been going crazy making trinket trays with it. Thanks for inspiring how I decorate the trays. I also used it with a little elephant pot mold from Temu. And my favorite, gnome mold from Temu. It does start out runny, but they are serious about the 10 minute work time, which is probably why it thickened up on you. I am looking forward to seeing more videos by you using this product. ❤

[@resinartists]

I just love seeing your videos where you keep on experimenting new things and they come out so beautiful 😍

[@mizzuzie3338]

The combination blue and silver is gorgeous and I liked the bezels as much as the incense holders. I might need to get that mould and some incense.

[@fairyspunfibers9098]

Oh, those bezels are *gorgeous*, Claire! And welcome home! Hope your trip to Birmingham was fun! I LOVE JDiction products, and pretty much don't want to use any other resin product, whether it's their UV products, various epoxies...whatever! Their customer service is also great. I will DEFINITELY try their resin crete. 😊

[@lorriv9763]

First time I've watched you and loved the video. Those bezels!!!

[@dmmomma]

Your washi tape on the plain burner will look amazing!

[@joshuabray37]

This stuff is GREAT. When it cures, it's like a good quality ceramic. It feels like a Hummel figure. It is paintable with craft acrylics (some work better than otters). I had great success with "Folkart" brand craft paint... It's easy to mix. It has the consistency of milk. At 30 minutes you can demold. It's surprisingly strong too.... As others said, the ratio in the description is incorrect. It's 10:3 (10 powder, 3 water).

[@craftyfox1959]

The holographic foils are actually stickers you cut and peel the back off. They come off with a bit of a struggle. I have some like those. Love the project results. Very pretty.

[@MushroomHausArt]

Oh, you've answered a bunch of questions I've been having about this stuff! I've been curious both about the Homeware Design pigments and how resin interacts with it, so this is great! I've gone through a few bags of Resincrete at this point and pretty much consider it my go-to now for eco pours. It's fantastic for even very thinly embossed areas. Still trying to find a sealer I'm 100% happy with, but the usual Minwax isn't too shabby.

[@kathrynseaman6482]

love the colours, and foils in the bezels so pretty!

[@LynzCraftz]

Love the ResinCrete! I've used it in a few videos and for me it was the first "Eco pour" I've done so for me the pourability was not so unusual. It is a dream to pour, isn't it? Good video, Claire!

[@LisaVornhagen]

I have those same incense burners, but I got mine from Amazon before there was Temu. I've only used resin in them. Those bezels are really amazing! I love those foils and really need to get some.

[@glendasnailham8275]

Just bought this item so glad you have helped me to know how to use it thank you so much take care

[@lindaeastment4542]

Hi Claire, Super cool loved the tattoos thanks for sharing 👍💖

[@Leena79]

These look great, especially the pendants. I'm sure you can come up with something fun to add to the incense burners to jazz them up a bit. The moon phases one looks very nice as is.

[@CleverGirlsCraft]

I'm so excited to see this, mine is coming in today!!

[@debrapicarella1063]

Love love them ,thanks Debby

[@genettejennings5537]

It truly is tough. I made a vase with this product and struggled to get it out, once I finally got it out, it fell on my concrete floor and didn't break. Yea!!

[@kimcuervo2905]

They are fabulous. You can embellish the incense burners and put a layer of UV resin and you will love them more.

[@carolhutchinson1253]

The incense burner moulds are definitely better with colourful resin. Still love the bezels and...yes...I had to go and buy some! Claire I just spend money when I fall in love with your videos😂

[@gothiccharms]

When I used this product I fell in love as well. Unfortunately on one pour I had too much and it was setting up fast. I grabbed a coaster mold, not realizing that it was a holographic mold, and poured the resincrete in there..... no more a holographic mold. LOL Oh well, live and learn, right?? I love that you can break up the left over stuff and ADD IT BACK to your next pour! :D

[@WizardKitty723]

Love the pendants

[@RaesTurquoiseTurtle]

I liked the resin Crete I bought it to try shortly after it became available. It's Pretty brittle in thin molds I would not have used it in the incense molds after pouring fairly shallow keychain molds. I could very easily snap them in half. Was disappointed in that aspect for thicker things like trinket trays it's nice but really not cost effective. 😕 it does set up insanely fast like have everything you need ready before you start mixing and go go go lol the bezels are cute.

[@alcg3981]

Ahhh, Patchouli ❤! Love it, in a small dose on my wrists, or a wax melt, never tried it as an incense stick! I bet you can find something up your sleeve to decorate / re-attempt that mold. I challenge you 😊❤! Heehee.

[@Toonpish]

well you chose the perfect colours and you have given me the umph to try it myself lol thank you Honey

[@charlenelesher1198]

I have had these molds for a long time, but only used resin in them. These should turn out awesome!

[@dawnr714]

I use alcohol inks and pigments for swirl/marble effects in my resincrete. I love that its so runny but acrylic paint makes it thicken instantly. I've wasted product because of that. 😃💙💜

[@antonietta2874]

Those bezels are so beautiful. Love them.

[@junedorning1711]

I have the eco resin just haven't tried using it yet now I'm going to give it a try

[@Vsv1224]

I’d love to try this product, but I got a bit confused. With 90 grams of water wouldn’t it have been 270 grams of resincrete, not 300 grams? What am I missing? Do these dry hard so they don’t break easily? Is it non-flammable especially for resin burners? Thank you for demo-ing this product. It looks easier than Jesmonite. I love the necklaces!!!

[@ClairesCraftyCorner]

Ohhhh so it is 100g powder to every 30g water ... So I multiplied by 3 ... I used 3 x 100g Therefore 3 X 30g I hope this makes sense I am utterly useless with the calculations haaaa a

[@SkitchBean_aka_Christine_E]

The mixing ratio is 100 grams of powder to 30 grams of water. So Claire's mixture is correct. I have been using a calculator every time I mix a different quantity. 😂

[@Vsv1224]

Thank you @ClairsCraftyCorner and @SkitchBean. I knew I was missing something. I was doing 90 x 3 to come up with 270. I’m thankful for the clarification. Y’all rock!

[@nicolareid7987]

Hi Claire, could you tell me if i can use ultion paint in Aqua cast so it matches my decor? Thankyou

[@edienorris9268]

Me too can’t wIt to try

[@debrabradford3344]

Clair made me do it.

[@jessfoster2721]

So is this a similar dusty texture like working with cement? Or is it smooth and soft like resin?

[@melaniereisner8375]

Can you do a layer of resin, with rocks,stickers, flowers, etc. over the top?

[@jayelleart]

Wow! Very cool! Will you try to colour them with other pigment or paints like you did with Jesmonite?

[@melaniehenshaw8696]

Hi it was lovely to say hello at makers. I came to the dremel workshop but you were both so engrossed.

[@callyross7873]

I've enjoyed experimenting with Resincrete too! one thing I've done is add stickers, wording, tattoos, flowers, etc and poured epoxy resin over the top. One more thing, I've added mica powder to the powder and stirred it well before adding to the water, it doesn't provide much color though. I wonder if you color the water before adding the powder if you'd get more working time....

[@luzvuaille7406]

Buenisimo, una pregunta, esta resina queda como con ka consistencia de un yeso ?? Es que las cosas en yeso se parten fácilmente. Esta se rompe?

[@sharonhaughton-pearson2790]

Would this work for pen molds? Or is it not strong enough? Your work and enthusiasm are beautiful by the way. Thank you for sharing. ❤

[@bexcraftdesigns]

Absolutely beautiful ❤

[@klairbaranek]

I can’t wait to buy this because I saw this on another channel called Steve McDonald’s arts and crafts.

[@Angelswed]

What can u spray on top to make the resincrete shiny and seal the ink you added?

[@kangel7906]

If only JDiction shipped it to Australia. I got excited thinking I may be able to get this one to try seeing it was JDiction. I have tried one like Jesmonite here in Australia but wasn't keen on it. We can't get the pigments shipped here either as HomeDesign Co don't ship here. Hopefully I will find an eco pour here or find a company that will ship to here. Anyway great video as always. P.S. loved the Apron I won on the draw a couple of months back. 😊

[@mandicoleman7433]

Awesome ❤

[@swcrafting]

I love Resincrete and they now have a kit that comes with 2 molds and some colors

[@artlessordinary]

wonderful again

[@traceysmartart]

Is resin crete heat proof for coasters & do you have to seal?

[@luzvuaille7406]

Esta resina se parte?? Yo uso una de pebeo , resin plaster pero es muy frágil , si se cae se rompe. Gracias por la respuesta

[@divingwithdutchess4765]

Not sure if you can help me. I poured a small tray and put abalone chips on it. The rim was loaded with little holes. Can they be filled?

[@sbr1160]

What does the texture dry like? Im looking at using this for some things i have in mind, but seen a different version i can get immediately from the shop, but after reading reviews and seeing its more like plaster than a resin had me worried its not fit for my purpose

[@rebeccamoerno8356]

Love the bezels they came out great, just add a tattoo to the flat one ❤

[@shattonzubieta9533]

Idk if there's a piece diff between colors, but if not just get white and add alc inks

[@colorfulcolorist]

I wonder how one of those split cups would work with this.

[@Bunyip_Studios]

This looks very much like Crystalcal R, an extremely hard casting plaster. You can get a 25kg bag for less than £40 in the UK

[@katrinthorsdottir7514]

I’ve never used foils, I would have done the same thing. 😊

[@joanstone4162]

I still can't get it here, unless I pay a fortune to have it shipped. Love how these turned out

[@adelewashburn3744]

So love the bezels, a happy accident sort off x

[@jennifox1464]

Do you have the link for the foils?

[@janbuckley1]

I’m not an incense lover but those bezels are to die for 😍

[@isabellrc]

Ok, I’m going to be the fan downer today. I’m not a fan….if this product….yet. It reminds me of using concrete/mortar mix I’ve used in candle molds. Once you applied the coils & resin I loved how you saved it. I’m the type who gets Eeek when it comes to mistakes. I get disappointed too fast; also $$ plays into it.

[@Kathy-Carr]

What is the difference between this and the Jesmonite?

[@rebeccasaladino9466]

I haven’t tried resincrete yet, I want to but I’m not sure what to seal it with after I paint it. Can someone suggest a product to seal it with?

[@bradleylemons6199]

I wasn't aware "I question my own abilities" was synonymous with "I question the manufacturers instructions."

[@michelle_resinrebel]

Hi Claire where did my comment go??? Came back onto say my temu haul is up,🎉, i must be the only one that hates them, incense 🤢 they make me feel sick, they remind me of beinv a teenager, everyone was burning them even in the shops 😫 i couldn't stand it, love the bezels thanks for sharing ❤❤❤ xxx

[@DaddisHouse]

How long before it fully hard? I used it making snowflakes and after 24 hours, the tips of the snow flakes were still brittle and broke off.

[@ClairesCraftyCorner]

It'd usually 24 hours .. but the snowflake moulds are super hard for eco

[@DaddisHouse]

So this stuff is more for things without small tips?

[@fotojeny]

🤩

[@helenevans1]

HELP Why has mine cracked when removing from the mould? I've done it afew times but it cracked both times, I followed the instructions correctly.

[@journeyhome98]

Wouldn't 3:1 be 300:100 not 300 to 90? Not being critical, just trying to clarify.

[@ClairesCraftyCorner]

Yeh this is what got me confused 🤣🤣🤣 it's 100g powder to 30g water So X 3 on both I used 300g powder to 90g water xx Hope this makes sense x

[@journeyhome98]

Lol. It does make sense like that, but not 3:1…. Lol. Weird. Ty for the reply.

[@tjsims8891]

I'm not sure exactly what Resincrete is?? Can someone tell me??

[@Timenssiouin]

Ah j'ai les mêmes moules pour l encens

[@jodimarie379]

Just a general fyi. I used this and dropped my piece a few weeks later and it SHATTERED into many small pieces. I don't know much about other eco resins or jesmonite and if they shatter also, but I thought I would mention it...lo,

[@carolynmozzone412]

Been using resincrete for awhile now. Very short work time but you can add a little more water or a retarder😀

[@estelletester6571]

Looks good just a shame it’s more expensive compared to similar eco resins x

[@trevorburgess2695]

🙂🙂🙂🙂🙂🐶🩵

[@naudiaangelica6925]

I also thought "This can't be right." when I saw how runny it was. It's got to be a common mistake.

[@SreedharanValiparambil-sp9oz]

Hi

[@kristalburns3490]

Clair, You need to approach using a new materials with a different mind set. Take a deep breath and remind yourself you have to know the rules before you can break them. So take the mad out of the mad scientist and follow the directions so you know how things are supposed to work. After that first time all bets are off.

[@spectonkular7510]

Oh my! I did the exact same thing, I added a bit extra for the same reason you! Same result! Second attempt was so much better

[@michaelpearson1272]

Hi Claire Google. Paper circle cutters. Makes life easier you will see the range.