You must try this !

[@JennifersJemz]

OMG, these are STUNNING!! I used to stamp a lot, so I just wanted to give you (& everyone) a little tip: you can buy sheets of plexiglass cut to whatever size you want from a hardware store (here I went to Ace Hardware), and really thin is really cheap & works like a dream as a stamp block that makes no marks where you don't want them in clay, as there will be no edge inside of the clay you're stamping on (i.e. 6 x 6 piece of clay, but stamp is in the middle of a 14 x 14 piece of plexi.). I hope this makes sense. My biggest sheet is 16" x 18", and only either 1/8" or 3/16" thick. I love them. I hope this helps anyone who stamps. I'll answer any questions I can if needed, too. Miss Claire, thanks so much for all of the videos and the tips, the inspiration, etc. You are a real treat to watch. You deserve all the best! Happy Creating!!!!

[@Fairytaleartcorner]

I'm not sure if the big ones are big enough but I think they'll look so cool as coasters 😍😍😍

[@Toonpish]

These are absolutely beautiful. so original in the design of the inlays and you made fantastic pieces with them.💕

[@cherspann]

The one looking over her shoulder looks like my gorgeous friend Raina. These are stunning!

[@patriciaharkin1571]

They're gorgeous Claire, perfect for key rings and pop sockets.

[@touchedbyanangelecrafts417]

absolutely gorgeous, You are so fun to listen to. LOl, thanks so much for all the risks you take on our behalf...your projects show true creation. Hugs from America

[@LiveItLikeLisa]

Oh god these are pretty!! I am obsessed with theses ladies!!! And the colours are just stunning!!! Love love love them!!

[@melaber77]

I love that you and Wendy at Toonpish are friends! I love watching both of you for great ideas!

[@ClairesCraftyCorner]

Thank you so much ❤️❤️❤️ I love that we're friends toooo

[@isabellrc]

I’m just getting started with polymers ….. I have gathered up too much of everything to goooo. I love looooove these inlays! Depending on sizes, earrings, pendants, key chains. Beautiful

[@mlfett6307]

Love that mica powder! Some thoughts - using the metal lid might not be an optimal way to control the stamp as it bends. If you use the acrylic blocks (they are sold in many many different sizes) you can see the image and control the impression. You call them inlays, but they can be thought of as clear stamps. (and there are millions of designs out there). Also cling mounted and wood mounted rubber stamps as well. And while I wouldn't recommend baking the rubber ones with the clay unless they are just rubber (and not mounted on foam). Don't call them "cookie cutters" as that implies that you use them for baking as well. Just call them cutters, and emphasize that once you have used them for polymer clay, they should not be used for baking in the kitchen. I make a clear decision when I buy baking tools (texture, cutters etc) - Kitchen or Craftroom. That also extends to the baking - I use a toaster oven in the craftroom for polymer clay baking. You can salvage the powder that is left over on the craft mat by using translucent polymer clay and rub it all over the mat to pick up all that lovely powder. When baked, the clay will have a lovely glow.

[@shelleywhalen9201]

I absolutely love the dark purple and teal one the colours are amazing thank you so much for sharing hugs Shelley ❤❤❤

[@kungfumanda724]

I love the woman with the flower over her eye - very Mother Nature 😍 so glad I wasn’t having to do that chameleon powder clean up though 😱🤣

[@karenlloyd16]

Oh no.. ANOTHER idea I want to try. Stunning results.

[@debrapicarella1063]

Love them, wish you would do more with the clay. Thanks Debby. Use for key rings

[@Jaylenjade]

Stunning! And I love your enthusiasm! Makes watching so much fun!

[@RaesTurquoiseTurtle]

These are beautiful 😍 I love the chameleons as well. I tend to forget about mine because they arent right on my wall like yours!

[@DorianneDelageArt]

They are amazing ! 🤩 I'm not a polymer clay pro but you make me want to try this technique !

[@audreycleary9023]

Claire they are absolutely stunning 😍 I love them ❤

[@andreeauricaru4317]

😍😍😍 so wonderful! Lovely inlays

[@juliesmith8426]

They are beautiful can't wait to hear from Roxanne so that I can purchase some xx

[@michelle_resinrebel]

Hi Claire wow love these so much 😍 😍 😍 amazing idea 💡 they are stunning 😍 thanks for sharing your amazing work ❤️ ❤️❤️ xxx

[@genettejennings5537]

Those are absolutely beautiful. Gorgeous.

[@TheMadArtist1]

These turned out really beautiful 😍

[@julieashton8877]

So pretty, Claire!

[@copperowlwoodturning5929]

These are all beautiful, Claire. Love love love the chameleon powders. 🥰😊😊

[@jaykb6587]

Those powders are fantastic! Mix them very, and mean VERY lightly directly into the resin and you will get the most beautiful glitter look without taking away the transparency.

[@odettehillier3387]

Love the idea's you come up with ❣️❤️🙂

[@ilsabailey8195]

Really awesome. Thanks for trying them in clay. I was wondering.

[@mariannesutherland4894]

Love these... they need to make like a wreath of flowers and a wreath with leaves to go with the girls.

[@barbridingsTheResinator]

Beautiful! Hope you are feeling better.

[@lisademauro5618]

Inspired again Claire!! I agree with Jay, jdiction is the best uv resin I've used as well.

[@kryscoffman2885]

Absolutely gorgeous!!! TFS!! Xx

[@sheenailes1966]

Lovely and the inlays are brilliant

[@LisaVornhagen]

Those are all really gorgeous! I love the chameleon powder! I never thought of topping polymer clay with UV resin. I'll have to keep that in mind. Thank you!

[@dawncoleman470]

Fantastic project, amazing results. The inlays look enigmatic. Beautiful ❤️

[@roygarcia4176]

Those would be beautiful imbedded in resin!!!

[@dmmomma]

Came in too late for the live stream so went to the beginning and OMW how gorgeous! Gorgeous, the only way I can describe these. Really, really nice.

[@patriciasnyder9536]

These are gorgeous! Something else you can do with them is make them into clips for your chipmor pretzel bags

[@lindasamuels6404]

Hey Claire ! Missed the live chat. I fractured my finger and had to get a brace but omg I love these and can’t wait to make them ! Thank you so much Linda from NC USA 💕

[@charlenelesher1198]

I'm right with you...I am a chameleon powder addict! These are gorgeous. Yep, I would use the for keyrings as well. Some smaller ones could be pendants or earrings. I've got to make a keyring for myself!!! 💕💜

[@kathryngrandal-johansen5880]

Oh my gosh, love love love these ❤

[@antonietta2874]

These are gorgeous! Love them!

[@Enjoythepour]

These turned out beautifully! I love polymer clay. It was my first craft. Can’t wait to do something similar!❤

[@genevafraser5859]

These are so beautiful love love them

[@georgiec2612]

These inlays are stunning, and even more so with those colours 😍 the bubbles you have in your polymer clay are most likely from the way you are conditioning it in the pasta machine, you need to fold it in half and put the folded side down into the machine every time to try and avoid the bubbles. It takes longer and requires a bit more patience (not my strong suit haha) but makes it much easier at the end, because other than the visible bubbles, sometimes you can get bubbles that you can't see before baking that come out after baking as the air expands in the oven...

[@laylaemily]

I absolutely love ❤️ the inlays! I went to Roxanne’s site, will wait until they are available for purchase they’re so gorgeous

[@texas8322]

Amazon has a UV resin 240G hard type that has a little bit of an odor, but not too bad. I've been using it with some silicone molds.

[@hillarygroundwell2807]

They are stunning

[@fairyspunfibers9098]

Just GORGEOUS, Claire! I am always so charmed by how you are never afraid to try something new! Somehow, your magic touch turns what *should* be wacky, crazy, unworkable, a mess...into something gorgeous, inspired, fun, creative, perfect. 💕❤💕 I dunno how you do it, but I'm here for it! 😊👍 ~~~ Speaking of UV "stink"? Yes, do use PPE. However, JDiction UV resin has very little odor at all. Let's Resin also is quite low odor. I have to really watch out for out-gassing, as I have severe asthma, but these don't bother me.

[@fairyspunfibers9098]

I'd wear the little ones as earrings! 😊

[@jaykb6587]

Try JDiction UV resin. Low odor, no bubbles, and cures easily. After using a different (and more expensive) UV resin, I found it a few months ago and will never use anything else.

[@jodimarie379]

I agree about jdiction. I tried a bunch (5 or 6) of different random brands on Amazon, and Jdiction ended up being the best. Most UV resins had some sort sticky residue afterwards that wouldn't go away no matter how long I left under my lamp. I wiped with alcohol too. Then I would leave it outside for a bit in the sun and that would work sometimes. I finally figured that was just how most UV resins were. Then I used Jdiction and almost fell over in shock when it cured with no stickiness. It was also really affordable.

[@laurawilliams4005]

I agree, JDiction makes great UV resin. They now have new low & high viscosity types too.

[@carolynmozzone412]

That’s all I use😀 they have a high viscosity which is great for doming. They also have eco resin which is wonderful.

[@jaykb6587]

@@carolynmozzone412 I haven't used that high viscosity yet. Something I need to look into! Thanks.

[@jaykb6587]

I couldn't agree with more! Anything that was going to take complicated curing I used to wait until summer to do. Sitting it in my window always worked out. But now with JDiction, I don't have to wait. At this point, JDiction is all I use. Both UV and epoxy. Their epoxy has almost zero bubble problems. I don't even go back and check on it like I always had to do with every other epoxy I used. 👍❤️

[@meganlouise1125]

I'd use the smaller for earrings!!

[@laineykearns4506]

These are stunning. Can't wait for these inlays to be available.

[@sparkle4jesus77]

Gorgeous. I wanna learn how to do this!

[@stacy_thecraftycat6611]

Super pretty!

[@SuperSasha31]

Those would be super cute earrings

[@WispyRealm]

These are so pretty

[@neighmaway]

Quite beautiful

[@joanstone4162]

Let's resin uv resin is not very smelly. Love this idea.

[@elisashue5086]

Gorgeous 😍

[@fireflyexposed]

If your polymer is too hard, add a drop (literally 1 drop at a time) of baby oil. It will soften it up.

[@lizjanevski9042]

These are stunning - you make me want to get my polymer clay out and do some stuff - with the powder I’ve never used that before but love how it looks..did you cover the pieces with any foil ( create like a little cover over them) suspect no issues with the powder reacting with the heat… Also with UV resin what I do sometimes is pop the pieces outside if it’s a sunny day & cures the pieces beautifully - on really hot sunny day can take 5 /10min to cure & I don’t find it as tacky as if I was to use the UV lamp for some reason…

[@tammytoth5874]

Very pretty

[@carolynpratt]

Beautiful

[@smitamukne6473]

Very Nice 👍👍

[@mizzuzie3338]

The inlays themselvs are stunning but the combination you made here took it all above and beyond! 💜

[@MissChelle]

OMG, I made some earrings last night that look almost identical! We must be twins across the world Beautiful 🇦🇺❤️

[@sheribrockmeier127]

Love the faces!!!

[@stephaniecarisse7132]

I absolutely LOVE the inlays! Do they ship internationally (Canada) ?

[@candymatek3]

Perfect or not, everything we make as crafters are perfect for someone.

[@nsmith6345]

Just a hint for you. You want to keep rolling the clay until there are no air bubbles in it. I can see air bubbles in your video, some are pretty big.

[@maeve4385]

❤

[@tjsims8891]

A necklace!!

[@WizardKitty723]

Let’s Resin UV doesn’t smell

[@SuperSasha31]

Those would be super cute earrings

[@gabrielleschmidt1435]

Gorgeous 😍